Description:
The AncpAccessLoopGenSubscriberParams specifies the ANCP Access Loop Block's Subscriber specific parameters.
Parents: AncpAccessLoopGenParams
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
AncpAccessNode (AffiliatedAncpAccessNode) |
Relation between the AncpAccessLoopGenSubscriberParams and the ANCP Access Node object. |
Attribute | Description |
---|---|
Common Writable Attributes | Active, Name |
NumVlanTagsInStack |
The number of VLAN Tags in the Subscriber's stack. Type: u32 Default: 2 Range: 0 - 9 |
SubscriberCount |
The number of subscribers in the block. If VLANs are used, this is the number of subscribers per VLAN. Type: u32 Default: 1 Range: 1 - 32768 |
SubscriberIpv4Addr |
The starting IPv4 address for the subscriber block. Type: ip Default: 192.0.0.2 |
SubscriberIpv4AddrStep |
The step IPv4 address for the subscriber block. Type: ip Default: 0.0.0.1 |
SubscriberIpv4Gateway |
The gateway IPv4 address for the subscriber block. Type: ip Default: 192.0.0.1 |
SubscriberIpv4PrefixLength |
The IPv4 prefix length for the subscriber block. Type: u8 Default: 24 Range: 1 - 32 |
SubscriberMac |
The starting MAC address for the subscriber block. Type: mac Default: 00:10:94:00:00:02 |
SubscriberMacStep |
The step MAC address for the subscriber block. Type: mac Default: 00:00:00:00:00:01 |
SubscriberVci |
The starting VCI in the subscriber block. Type: u16 Default: 0 Range: 0 - 65535 |
SubscriberVciCount |
The number of VCIs in the subscriber block. Type: u16 Default: 1 Range: 1 - 65535 |
SubscriberVciStep |
The step to apply to the VCI in the subscriber block. Type: u16 Default: 1 Range: 0 - 65535 |
SubscriberVlanCount |
The number of VLAN IDs in the subscriber block. Type: u32 Default: 1 Range: 1 - 4095 |
SubscriberVlanId |
The starting VLAN ID for the subscriber block. Type: u16 Default: 100 Range: 0 - 4095 |
SubscriberVlanIdStep |
The step to apply for each subsequent VLAN ID. Type: u16 Default: 1 Range: 0 - 4095 |
SubscriberVpi |
The starting VPI in the subscriber block. Type: u16 Default: 0 Range: 0 - 4095 |
SubscriberVpiCount |
The number of VPIs in the subscriber block. Type: u16 Default: 1 Range: 1 - 4095 |
SubscriberVpiStep |
The step to apply to the VPI in the subscriber block. Type: u16 Default: 1 Range: 0 - 4095 |
There are no read-only attributes.