Description:
Configure EVPN MAC Mobility on STC PE side
Can be used with Command Sequencer: Yes
GUI Command Name: BGP: EVPN MAC Mobility - behind DUT
Parents: Sequencer
Attribute | Description | ||||||
---|---|---|---|---|---|---|---|
Common Writable Attributes | ErrorOnFailure | ||||||
AttachedPeIpv4Addr |
Attached PE/DUT IPv4 Address. Type: ip Default: 10.0.0.1 |
||||||
DstPort |
Select the destination port to which to migrate. Type: handle Default: 0 |
||||||
Evi |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Select the EVI that contains the source routes Type: handle Default: 0 |
||||||
Evis |
EVIS that contains the source routes Type: handle Default: 0 |
||||||
GatewayIpv4Addr |
IPv4 address of the first gateway. Type: ip Default: 10.0.0.1 |
||||||
GatewayIpv4AddrDeviceStep |
Increment value with which to create subsequent addresses per device. Type: ip Default: 0.0.0.1 |
||||||
GatewayIpv4AddrList |
Gateway IPv4 Address List. Type: ip Default: 10.0.0.1 |
||||||
GatewayIpv4AddrStep |
Increment value with which to create subsequent addresses. Type: ip Default: 0.0.0.0 |
||||||
GatewayIpv4AddrStepList |
Gateway IPv4 Address Step List. Type: ip Default: 0.0.0.1 |
||||||
GatewayIpv6Addr |
IPv6 address of the first gateway. Type: ipv6 Default: 2001::0 |
||||||
GatewayIpv6AddrDeviceStep |
Increment value with which to create subsequent addresses per device. Type: ipv6 Default: 0::1 |
||||||
GatewayIpv6AddrList |
Gateway IPv6 Address List Type: ipv6 Default: 2001::0 |
||||||
GatewayIpv6AddrStep |
Increment value with which to create subsequent addresses. Type: ipv6 Default: 0::0 |
||||||
GatewayIpv6AddrStepList |
Gateway IPv6 Address Step List. Type: ipv6 Default: 0::1 |
||||||
HostParamsInputType |
Format of input paramters for the host. Type: enum Default: Incremental Possible Values:
|
||||||
RouteDistinguisher |
Value of the route distinguisher. Type: string Default: 192.0.0.1:1 |
||||||
RouteDistinguisherList |
Route Distinguisher List. Type: string Default: 192.0.0.1:1 |
||||||
RouteDistinguisherStep |
Increment value with which to create subsequent distinguishers. Type: string Default: 0:1 |
||||||
SrcHosts |
Select hosts to migrate. Type: handle Default: 0 |
||||||
VlanId |
Value of the first VLAN id. Type: u16 Default: 100 Range: 0 - 4095 |
||||||
VlanIdDeviceStep |
Increment value with which to create subsequent IDs per device. Type: u16 Default: 1 Range: 0 - 4095 |
||||||
VlanIdList |
VLAN Id List. Type: u16 Default: 100 Range: 0 - 4095 |
||||||
VlanIdStep |
Increment value with which to create subsequent IDs. Type: u16 Default: 1 Range: 0 - 4095 |
||||||
VlanIdStepList |
VLAN ID Step List. Type: u16 Default: 1 Range: 0 - 4095 |
Read-Only Attribute | Description |
---|---|
Common Read-Only Attributes | PassFailState |