BgpEvpnSelectiveMcastEthernetTagRouteConfig Object

Ipv4Group

Bgp EVPN Join IPV4 multicast group

Aggregator AS

Type: string

Default: "" (empty string)

Aggregator IP

Type: ip

Default: null

List of AS numbers, in string format, that will be used in the AS_PATH attribute (type code 2) in BGP UPDATE messages. This list identifies the autonomous systems through which the routing information carried in the UPDATE message has passed.

Type: string

Default: 1

Modifies the AS PATH of each route within a route block.

Type: string

Default: 1

Number of AS Paths per route block.

Type: u32

Default: 1

Path segment type for the AS path specified by the asPath attribute.

Type: enum

Default: SEQUENCE

Possible Values:

Atomic Aggregate Present

Type: bool

Default: FALSE

Possible Values:

Identifies the route reflectors that a prefix has passed through. This is the optional CLUSTER_LIST path attribute (type code 10), as covered in RFC 2796. This needs a list of cluster IDs (router IDs). Enter up to 250 comma-separated cluster IDs in the form of IPv4 addresses.

Type: ip

Default: 0.0.0.0

Community

Type: string

Default: 1:1

Data Plane Encapsulation

Type: enum

Default: NONE

Possible Values:

Bgp VPN Parameter Distribution Type

Type: enum

Default: ROUND_ROBIN

Possible Values:

Ethernet Segment Identifier

Type: string

Default: 0

Ethernet Segment Type

Type: enum

Default: TYPE0

Possible Values:

Ethernet Tag Id

Type: u32

Default: 0

VRF EVI Count

Type: u32

Default: 1

Extended Community EVI Route Target Value

Type: string

Default: 100:1

Extended Community EVI Route Target(RT) Step

Type: string

Default: 0:1

Extended Community

Type: string

Default: "" (empty string)

Extended Community Step

Type: string

Default: "" (empty string)

Extended Community Per Block Count

Type: u32

Default: 1

Configures IGMP version

Type: enum

Default: IGMP_VERSION_2

Possible Values:

IPv6 Originator Id

Type: ipv6

Default: null

List of BGP communities in string format. A large community is a group of destinations that share some common property. This is the optional COMMUNITIES community path attribute (type code 8) in UPDATE messages. BGP large communities are described in RFC 8092.

Enter up to eight comma-separated pairs. Put a colon between the parts of the pair.

Example: AS:Value,AS:Value,AS:Value.

where each AS and Value is between 0 - ‭4294967295‬. AS numbers cannot be duplicated. Each AS can have only one value.

Type: string

Default: 1:1:1

Value for the LOCAL_PREF path attribute in UPDATE messages. This informs other BGP speakers in the same AS of the local BGP speaker's degree of preference for a route. A higher number means more preference.

Type: u32

Default: 10

Range: 0 - 4294967295

Modifier to allow a routeblock to vary the Local Preference. The count will be tied to Network Count.

Type: u32

Default: 0

Range: 0 - 4294967295

Value for the multi-exit discriminator (MED). This is the optional MULTI_EXIT_DISC path attribute (type code 4) in UPDATE messages. This value can be used by a BGP speaker's decision process to discriminate among multiple exit points to a neighboring autonomous system. An exit or entry point with a lower MED should be preferred.

Type: u32

Default: null

Range: 0 - 4294967295

Modifier to allow a routeblock to vary the MED. The count will be tied to Network Count.

Type: u32

Default: 0

Range: 0 - 4294967295

Configures the Multicast protocol for type 6 and type 7 EVPN routes

Type: enum

Default: IGMP

Possible Values:

IP address of the router that should be used as the next hop to the destinations listed in the UPDATE message. This is the mandatory NEXT_HOP path attribute in UPDATE messages.

Type: ip

Default: null

IPV6 address of the border router that should be used as the next hop to the destinations listed in the UPDATE message.

Type: ipv6

Default: null

IPV6 Link Local address for the nexthop

Type: ipv6

Default: null

Next Hop Type of the router that should be used as the next hop.

Type: enum

Default: IPV4

Possible Values:

Describes how a prefix came to be routed by BGP. It defines the origin of the path information. This attribute is generated by the AS that originated the route(s) in the update message

Type: enum

Default: IGP

Possible Values:

Configures originating router's IPv4 address

Type: ip

Default: 0.0.0.0

Configures originating router's IPv6 address

Type: ipv6

Default: ::

Router ID of the originator of the route in the local AS. This is the optional ORIGINATOR_ID path attribute (type code 9).

Type: ip

Default: null

Originator Id Type

Type: enum

Default: IPV4

Possible Values:

Route Category

Type: enum

Default: UNDEFINED

Possible Values:

VRF Route Distinguisher

Type: string

Default: 192.0.0.1:1

VRF Route Distinguisher

Type: string

Default: 0:1

Value of the extended community path attribute called Route Target, in string format. This is the Route Target extended community, carried in the optional Extended Community path attribute (type code 16) in UPDATE messages. The Route Target identifies a set of sites to which a PE router distributes routes. BGP extended communities are described in an Internet Draft.

Type: string

Default: 100:1

VRF Route Target Step

Type: string

Default: 0:1

BGP route's session IP version.

Type: enum

Default: IPV4V6

Possible Values:

Configures source filter mode -Include Group Type or Exclude Group Type

Type: enum

Default: INCLUDE

Possible Values:

Configures source IPv4 address to be used for source filter mode- Include Group Type

Type: ip

Default: 192.0.1.0

Configures source IPv4 address step.

Type: ip

Default: 0.0.0.1

Configures source IPv4 address count.

Type: u8

Default: 1

Range: 1 - 255