Description:
Bgp IPv4 Mvpn Join Route Configuration
Parents: BgpRouterConfig
Children: BgpCustomAttribute, Ipv4NetworkBlock
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
JoinedMulticastGroup (JoinedMulticastGroup) |
Customer Multicast Group |
|
JoinedSource (JoinedSource) |
Joined Multicast Sources |
Attribute | Description | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AggregatorAs |
AS number to be used for the AGGREGATOR attribute. Type: string Default: "" (empty string) |
||||||||||||
AggregatorIp |
IP address to be used for the AGGREGATOR attribute. Type: ip Default: null |
||||||||||||
AsPath |
List of AS numbers, in string format, that will be used in the AS_PATH attribute (type code 2) in BGP UPDATE messages. This list identifies the autonomous systems through which the routing information carried in the UPDATE message has passed. Type: string Default: 1 |
||||||||||||
AsPathIncrement |
Modifies the AS PATH of each route within a route block. Type: string Default: 1 |
||||||||||||
AsPathPerBlockCount |
AS Path Per Block Count Type: u32 Default: 1 |
||||||||||||
AsPathSegmentType |
Path segment type for the AS path specified by the asPath attribute. Type: enum Default: SEQUENCE Possible Values:
|
||||||||||||
AtomicAggregatePresent |
Whether to include the ATOMIC_AGGREGATE attribute in BGP UPDATE messages. When this is TRUE, the receiving BGP speaker cannot de-aggregate the prefix into more specific routes. Type: bool Default: FALSE Possible Values:
|
||||||||||||
ClusterIdList |
Identifies the route reflectors that a prefix has passed through. This is the optional CLUSTER_LIST path attribute (type code 10), as covered in RFC 2796. This needs a list of cluster IDs (router IDs). Enter up to four comma-separated cluster IDs in the form of IPv4 addresses. Type: ip Default: 0.0.0.0 |
||||||||||||
Community |
List of BGP communities in string format. A community is a group of destinations that share some common property. This is the optional COMMUNITIES community path attribute (type code 8) in UPDATE messages. BGP communities are described in RFC 1997. Type: string Default: 1:1 |
||||||||||||
EnableGtm |
Enable GTM on MVPN Join route Type 6 or Type 7 which sends RD as 0. Type: bool Default: FALSE Possible Values:
|
||||||||||||
ExtendedCommunity |
Extended Community Type: string Default: "" (empty string) |
||||||||||||
ExtendedCommunityIncrement |
Extended Community Step Type: string Default: "" (empty string) |
||||||||||||
ExtendedCommunityPerBlockCount |
Extended Community Per Block Count Type: u32 Default: 1 |
||||||||||||
ImportRouteTargetFromSource |
Enable to import the route target from the source PE. Disable to configure the route target manually Type: bool Default: TRUE Possible Values:
|
||||||||||||
Ipv6OriginatorId |
IPv6 Originator Id Type: ipv6 Default: null |
||||||||||||
LargeCommunity |
List of BGP communities in string format. A large community is a group of destinations that share some common property. This is the optional COMMUNITIES community path attribute (type code 8) in UPDATE messages. BGP large communities are described in RFC 8092. Enter up to eight comma-separated pairs. Put a colon between the parts of the pair. Example: AS:Value,AS:Value,AS:Value. where each AS and Value is between 0 - 4294967295. AS numbers cannot be duplicated. Each AS can have only one value. Type: string Default: 1:1:1 |
||||||||||||
LocalPreference |
Value for the LOCAL_PREF path attribute in UPDATE messages. This informs other BGP speakers in the same AS of the local BGP speaker's degree of preference for a route. A higher number means more preference. Type: u32 Default: 10 Range: 0 - 4294967295 |
||||||||||||
LocalPreferenceIncrement |
Modifier to allow a routeblock to vary the Local Preference. The count will be tied to Network Count. Type: u32 Default: 0 Range: 0 - 4294967295 |
||||||||||||
Med |
Value for the multi-exit discriminator (MED). This is the optional MULTI_EXIT_DISC path attribute (type code 4) in UPDATE messages. This value can be used by a BGP speaker's decision process to discriminate among multiple exit points to a neighboring autonomous system. An exit or entry point with a lower MED should be preferred. Type: u32 Default: null Range: 0 - 4294967295 |
||||||||||||
MedIncrement |
Modifier to allow a routeblock to vary the MED. The count will be tied to Network Count. Type: u32 Default: 0 Range: 0 - 4294967295 |
||||||||||||
NextHop |
IP address of the border router that should be used as the next hop to the destinations listed in the UPDATE message. Type: ip Default: null |
||||||||||||
NextHopGlobal |
IPV6 address of the border router that should be used as the next hop to the destinations listed in the UPDATE message. Type: ipv6 Default: null |
||||||||||||
NextHopLinkLocal |
Link local IPv6 address for the nexthop Type: ipv6 Default: null |
||||||||||||
NextHopType |
Determines the nexthop type based on the interface in which BGP is enabled Type: enum Default: IPV4 Possible Values:
|
||||||||||||
Origin |
Describes how a prefix came to be routed by BGP. It defines the origin of the path information. This attribute is generated by the AS that originated the route(s) in the update message. Type: enum Default: IGP Possible Values:
|
||||||||||||
OriginatorId |
Router ID of the originator of the route in the local AS. This is the optional ORIGINATOR_ID path attribute (type code 9). Type: ip Default: null |
||||||||||||
OriginatorIdType |
Originator Id Type Type: enum Default: IPV4 Possible Values:
|
||||||||||||
RouteCategory |
Route Category Type: enum Default: UNDEFINED Possible Values:
|
||||||||||||
RouteTarget |
Value of the extended community path attribute called Route Target, in string format. This is the Route Target extended community, carried in the optional Extended Community path attribute (type code 16) in UPDATE messages. The Route Target identifies a set of sites to which a PE router distributes routes. BGP extended communities are described in an Internet Draft. Type: string Default: 100:1 |
||||||||||||
SendIfType5Recved |
Only applicable when Route Type is Type7, Specifies whether Type 7 auto responds to Type 5. Type: bool Default: FALSE Possible Values:
|
||||||||||||
SessionIpVersion |
BGP route's session IP version. Type: enum Default: IPV4V6 Possible Values:
|
||||||||||||
Type |
C-multicast route type. Type: enum Default: TYPE7 Possible Values:
|
||||||||||||
UpstreamPeAddress |
The upstream PE's IPv4 router address is applicable when ImportRouteTargetFromSource = TRUE. It is used to aid the RT-import learning process by filtering incoming unicast routes that originate from the specified PE address. Type: ip Default: 192.0.0.1 |
||||||||||||
UpstreamPeAsNumber |
Specifies the upstream PE's AS number Type: u16 Default: 1001 Range: 0 - 65535 |
||||||||||||
UpstreamPeRouteDistinguisher |
Specifies the upstream PE's route distinguisher Type: string Default: 100:1 |
||||||||||||
UpstreamPeRt |
The upstream PE's router target is applicable when ImportRouteTargetFromSource = TRUE. It is used to aid the RT-import learning process by filtering incoming unicast routes that originate from the specified route target. Type: string Default: 100:1 |
There are no read-only attributes.