Description:
Defines the characteristics of BGP IPv6 routes.
Parents: BgpRouterConfig
Children: BgpCustomAttribute, BgpIpv6RouteBierTlv, BgpSrGlobalBlock, BgpSrIpv6Sid, BgpSrLabelIndex
Automatically-created children: BgpVpnRouteConfig, Ipv6NetworkBlock
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
EchoReplyErrorGeneration (EchoReplyErrorFecInfo) |
Echo Reply Error Generation. |
|
ParamsThatCreate (WizardGenerated) |
Wizard Generated Relation to Bgp Import Route Table Params |
Attribute | Description | ||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AddPathIdentifier |
Add Path Identifier Type: u32 Default: 1 |
||||||||||||||||||||||||||||||||||||||||
AddPathIdentifierIncrement |
Add Path Identifier Increment Type: u32 Default: 0 |
||||||||||||||||||||||||||||||||||||||||
AggregatorAs |
AS number to be used for the AGGREGATOR attribute. Type: string Default: "" (empty string) |
||||||||||||||||||||||||||||||||||||||||
AggregatorIp |
IP address to be used for the AGGREGATOR attribute. Type: ip Default: null |
||||||||||||||||||||||||||||||||||||||||
AigpMetric |
AIGP Metric Type: u64 Default: 10 |
||||||||||||||||||||||||||||||||||||||||
AigpMetricIncrement |
AIGP Metric is Increment Type: u64 Default: 0 |
||||||||||||||||||||||||||||||||||||||||
AigpPresent |
AIGP Present Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
AsPath |
List of AS numbers, in string format, that will be used in the AS_PATH attribute (type code 2) in BGP UPDATE messages. This list identifies the autonomous systems through which the routing information carried in the UPDATE message has passed. Type: string Default: 1 |
||||||||||||||||||||||||||||||||||||||||
AsPathIncrement |
Modifies the AS PATH of each route within a route block. Type: string Default: 1 |
||||||||||||||||||||||||||||||||||||||||
AsPathIncrementPerRouter |
Increment applied on AS Paths to determine the AS Path value for subsequent routers within router block. Type: u32 Default: 0 Range: 0 - 4294967295 |
||||||||||||||||||||||||||||||||||||||||
AsPathPerBlockCount |
Number of AS Paths per route block. Type: u32 Default: 1 |
||||||||||||||||||||||||||||||||||||||||
AsPathSegmentType |
Path segment type for the AS path specified by the asPath attribute. Type: enum Default: SEQUENCE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
AtomicAggregatePresent |
Whether to include the ATOMIC_AGGREGATE attribute in BGP UPDATE messages. When this is TRUE, the receiving BGP speaker cannot de-aggregate the prefix into more specific routes. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
BgpSrTlvFlags |
Encoded BGP SR TLVs. Type: enum Default: SRV6 Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
ClusterIdList |
Identifies the route reflectors that a prefix has passed through. This is the optional CLUSTER_LIST path attribute (type code 10), as covered in RFC 2796. This needs a list of cluster IDs (router IDs). Enter up to 250 comma-separated cluster IDs in the form of IPv4 addresses. Type: ip Default: 0.0.0.0 |
||||||||||||||||||||||||||||||||||||||||
Community |
List of BGP communities in string format. A community is a group of destinations that share some common property. This is the optional COMMUNITIES community path attribute (type code 8) in UPDATE messages. BGP communities are described in RFC 1997. Enter up to eight comma-separated pairs. Put a colon between the parts of the pair. Example: AS:Value,AS:Value. where each AS and Value is between 0 - 65535, up to 8 pairs. AS numbers cannot be duplicated. Each AS can have only one value. Type: string Default: 1:1 |
||||||||||||||||||||||||||||||||||||||||
CommunityIncrement |
Specifies a list of BGP community incrementers in string format. This is a list of incrementers, each element in the list will specify which community value is to be incremented. Type: string Default: 1:1 |
||||||||||||||||||||||||||||||||||||||||
CommunityPerBlockCount |
Number of unique communities in this route block. Type: u32 Default: 1 |
||||||||||||||||||||||||||||||||||||||||
CustomMplsLabel |
Custom MPLS Label Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
CustomSrv6EndPointBehavior |
Custom SRv6 Endpoint Behavior Type: u16 Default: 65535 |
||||||||||||||||||||||||||||||||||||||||
EnableSegmentedNextHop |
Enable Segmented NexHop to send Segmented next hop extended community in an BGP update message. This is sent only when SAFI is Multicast or Labelled IP Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
EnableSrv6Flags |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Enable SRv6 Flags. Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
ExcludeAttributes |
Exclude Attributes Type: enum Default: 0 Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
ExtendedCommunity |
Extended Community Type: string Default: "" (empty string) |
||||||||||||||||||||||||||||||||||||||||
ExtendedCommunityIncrement |
Extended Community Step Type: string Default: "" (empty string) |
||||||||||||||||||||||||||||||||||||||||
ExtendedCommunityPerBlockCount |
Extended Community Per Block Count Type: u32 Default: 1 |
||||||||||||||||||||||||||||||||||||||||
InsertRtImport |
Insert RT-Import Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
Ipv4NextHop |
IPv4 Next Hop Type: ip Default: 192.0.0.1 |
||||||||||||||||||||||||||||||||||||||||
Ipv4NextHopIncrementPerRouter |
IPv4 Next Hop Increment Per Router Type: ip Default: 0.0.0.1 |
||||||||||||||||||||||||||||||||||||||||
Ipv4NextHopList |
IPv4 NextHop List Type: ip Default: 1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||
Ipv6ArgLength |
IPv6 argument length Type: u8 Default: 48 Range: 0 - 128 |
||||||||||||||||||||||||||||||||||||||||
Ipv6Arguments |
IPv6 argument Type: string Default: 0 |
||||||||||||||||||||||||||||||||||||||||
Ipv6FuncLength |
IPv6 function length Type: u8 Default: 8 Range: 1 - 128 |
||||||||||||||||||||||||||||||||||||||||
Ipv6FuncOpcode |
IPv6 function opcode Type: string Default: 0 |
||||||||||||||||||||||||||||||||||||||||
Ipv6Loc |
IPv6 locator Type: ipv6 Default: bbbb:1:1:1:: |
||||||||||||||||||||||||||||||||||||||||
Ipv6LocLength |
IPv6 locator length Type: u8 Default: 64 Range: 1 - 128 |
||||||||||||||||||||||||||||||||||||||||
Ipv6LocStep |
IPv6 locator step Type: ipv6 Default: 0:0:0:1:: |
||||||||||||||||||||||||||||||||||||||||
Label |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. This field is applicable when Safi is Labeled IP or VPN. It is a 20 bit value. Type: enum Default: NONE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
LargeCommunity |
List of BGP communities in string format. A large community is a group of destinations that share some common property. This is the optional COMMUNITIES community path attribute (type code 8) in UPDATE messages. BGP large communities are described in RFC 8092. Enter up to eight comma-separated pairs. Put a colon between the parts of the pair. Example: AS:Value,AS:Value,AS:Value. where each AS and Value is between 0 - 4294967295. AS numbers cannot be duplicated. Each AS can have only one value. Type: string Default: 1:1:1 |
||||||||||||||||||||||||||||||||||||||||
LargeCommunityIncrement |
Specifies a list of BGP community incrementers in string format. This is a list of incrementers, each element in the list will specify which community value is to be incremented. Type: string Default: 1:1:1 |
||||||||||||||||||||||||||||||||||||||||
LargeCommunityPerBlockCount |
Number of unique communities in this route block. Type: u32 Default: 1 |
||||||||||||||||||||||||||||||||||||||||
LocalNextHop |
This is the link-local IPv6 address of the next hop (emulated router). 16-byte link-local address, as needed for a 32-byte next hop. Type: ipv6 Default: null |
||||||||||||||||||||||||||||||||||||||||
LocalNextHopIncrementPerRouter |
Increment applied on Local Next Hop to determine the Local Next Hop value for subsequent routers within router block. Type: ipv6 Default: 0::1 |
||||||||||||||||||||||||||||||||||||||||
LocalPreference |
Value for the LOCAL_PREF path attribute in UPDATE messages. This informs other BGP speakers in the same AS of the local BGP speaker's degree of preference for a route. A higher number means more preference. Type: u32 Default: 10 Range: 0 - 4294967295 |
||||||||||||||||||||||||||||||||||||||||
LocalPreferenceIncrement |
Modifier to allow a routeblock to vary the Local Preference. The count will be tied to Network Count. Type: u32 Default: 0 Range: 0 - 4294967295 |
||||||||||||||||||||||||||||||||||||||||
LocalPreferenceIncrementPerRouter |
Increment applied on Local Preference to determine the Local Preference value for subsequent routers within router block. Type: u32 Default: 0 Range: 0 - 4294967295 |
||||||||||||||||||||||||||||||||||||||||
MdtGroupAddr |
MDT Group address. Type: ip Default: 0.0.0.0 |
||||||||||||||||||||||||||||||||||||||||
MdtIpv4Addr |
MDT IPv4 address. Type: ip Default: 0.0.0.0 |
||||||||||||||||||||||||||||||||||||||||
Med |
Value for the multi-exit discriminator (MED). This is the optional MULTI_EXIT_DISC path attribute (type code 4) in UPDATE messages. This value can be used by a BGP speaker's decision process to discriminate among multiple exit points to a neighboring autonomous system. An exit or entry point with a lower MED should be preferred. Type: u32 Default: null Range: 0 - 4294967295 |
||||||||||||||||||||||||||||||||||||||||
MedIncrement |
Modifier to allow a route block to vary the MED. The count will be tied to Network Count. Type: u32 Default: 0 Range: 0 - 4294967295 |
||||||||||||||||||||||||||||||||||||||||
MedIncrementPerRouter |
Increment applied on MED to determine the MED value for subsequent routers within router block. Type: u32 Default: 0 Range: 0 - 4294967295 |
||||||||||||||||||||||||||||||||||||||||
MplsLabel |
Mpls Label Type: u32 Default: 16 Range: 0 - 1048575 |
||||||||||||||||||||||||||||||||||||||||
MplsLabelStep |
Mpls Label step Type: u32 Default: 1 Range: 0 - 1048575 |
||||||||||||||||||||||||||||||||||||||||
NextHop |
IP address of the border router that should be used as the next hop to the destinations listed in the UPDATE message. This is the mandatory NEXT_HOP path attribute in UPDATE messages. Type: ipv6 Default: null |
||||||||||||||||||||||||||||||||||||||||
NextHopAddrType |
Next Hop Adddress Type Type: enum Default: IPV6 Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
NextHopCount |
Number of unique Next Hops in the route block. This count will have a multiplier affect on the route count. Type: u32 Default: 1 |
||||||||||||||||||||||||||||||||||||||||
NextHopIncrement |
Modifier to allow a route block to vary the Next Hop. Type: ipv6 Default: 0::1 |
||||||||||||||||||||||||||||||||||||||||
NextHopIncrementPerRouter |
Increment applied on Next Hop to determine the Next Hop value for subsequent routers within router block. Type: ipv6 Default: 0::1 |
||||||||||||||||||||||||||||||||||||||||
NextHopList |
It takes list of Ipv6 Nexthop values when Add path capability is enabled. it is applicable for Safi Unicast, labeled IP and VPN Type: ipv6 Default: 2000::1 |
||||||||||||||||||||||||||||||||||||||||
NextHopType |
NextHopType to identify if Nexthop is a list of ip addresses or single ip address Type: enum Default: NEXTHOP_INCREMENT Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
Origin |
Setting of the mandatory ORIGIN path attribute in UPDATE messages. This defines the origin of the path information. Type: enum Default: IGP Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
OriginatorId |
Router ID of the originator of the route in the local AS. This is the optional ORIGINATOR_ID path attribute (type code 9). Type: ip Default: null |
||||||||||||||||||||||||||||||||||||||||
OverrideGlobalSrgb |
Override Global SRGB. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
PrefixLengthCount |
Number of unique prefix lengths in the route block. This count will have a multiplier affect on the route count. Type: u8 Default: 1 Range: 1 - 128 |
||||||||||||||||||||||||||||||||||||||||
PrefixLengthIncrement |
Modifier to allow a route block to vary the prefix length. Type: u8 Default: 1 Range: 1 - 128 |
||||||||||||||||||||||||||||||||||||||||
RouteLabel |
Route Label used for establishing Ingress Replication PMSI tunnel. Only applicable when PMSI Tunnel Type is Ingress Replication. Type: enum Default: FIXED Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
RouteSubAfi |
Route's subsequent address family identifier. Type: enum Default: UNICAST Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
SessionIpVersion |
BGP route's session IP version. Type: enum Default: IPV4V6 Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
Srv6ArgLength |
SRv6 argument length. Type: u8 Default: 32 Range: 0 - 128 |
||||||||||||||||||||||||||||||||||||||||
Srv6EndPointBehavior |
SRv6 Endpoint Behavior Type: enum Default: CUSTOM Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
Srv6Func |
SRv6 Function. Type: enum Default: CUSTOM Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
Srv6FuncLength |
SRv6 function length. Type: u8 Default: 32 Range: 0 - 128 |
||||||||||||||||||||||||||||||||||||||||
Srv6LocBlockLength |
SRv6 locator block length Type: u8 Default: 32 Range: 0 - 128 |
||||||||||||||||||||||||||||||||||||||||
Srv6LocLength |
SRv6 locator length. Type: u8 Default: 32 Range: 0 - 128 |
||||||||||||||||||||||||||||||||||||||||
Srv6LocStep |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. SRv6 locator step. Type: ipv6 Default: :: |
||||||||||||||||||||||||||||||||||||||||
Srv6ServiceDataSubTlvFlags |
Select SRv6 service data sub TLVs Type: enum Default: STRUCTURE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
Srv6Sid |
SRv6 SID Type: ipv6 Default: 2001:: |
||||||||||||||||||||||||||||||||||||||||
Srv6SidInfoSubTlvType |
SRv6 SID information sub TLV type Type: u8 Default: 1 Range: 1 - 255 |
||||||||||||||||||||||||||||||||||||||||
Srv6SidStep |
SRv6 SID step Type: ipv6 Default: :: |
||||||||||||||||||||||||||||||||||||||||
Srv6SidStructureSubSubTlvType |
SRv6 SID structure sub sub TLV type Type: u8 Default: 1 Range: 1 - 255 |
||||||||||||||||||||||||||||||||||||||||
Srv6SubTlvType |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. SRv6 TLV type. Type: u8 Default: 1 |
||||||||||||||||||||||||||||||||||||||||
Srv6TranspositionLength |
SRv6 transposition length Type: u8 Default: 0 Range: 0 - 24 |
||||||||||||||||||||||||||||||||||||||||
Srv6TranspositionOffset |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. SRv6 transposition offset Type: u8 Default: 0 Range: 0 - 15 |
||||||||||||||||||||||||||||||||||||||||
Srv6TranspositionOffsetInBits |
SRv6 transposition offset in bits Type: u8 Default: 0 Range: 0 - 127 |
||||||||||||||||||||||||||||||||||||||||
SubAfi |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Subsequent address family identifier. Type: enum Default: UNICAST Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
UseDeviceAddressAsNextHop |
Enabel to use emulated device address as Next Hop value. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
UseDynamicLabel |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Deprecated. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
VpnPresent |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Whether a VPN is present. Enabled if the Label attribute is set to FIXED or INCREMENTAL. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||
WithdrawMplsLabel |
Withdraw Mpls Label Type: bool Default: TRUE Possible Values:
|
Read-Only Attribute | Description |
---|---|
RouteCount |
Number of routes in this route block. Type: u32 Default: 1 |
RouteCountPerRouter |
Number of routes per router in this route block. Type: u32 Default: 1 |