Description:
VXLAN EVPN Overlay Route Parameters
Automatically created from: VxlanEvpnOverlayConfigGenParams
Attribute | Description | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||||||||||||
EnableTrafficScaleForEvpnLearning |
Enables/Disables Scale For Evpn Learning (traffic only). Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
EnableType5OverlayIndex |
Enable/Disable Type-5 Overlay Index. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanActiveStandbyMode |
VXLAN EVPN Overlay Active Standby Mode option for Per ESI Type: enum Default: SINGLE_ACTIVE Possible Values:
|
||||||||||||||||
VxlanConfigureNextHop |
VXLAN EVPN Overlay Overwrite the NexHop Address Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanEthernetSegmentId |
VXLAN EVPN Overlay Ethernet Segment Identifier Type: string Default: 00:00:00:00:00:00:00:00:00 |
||||||||||||||||
VxlanEthernetSegmentIdStep |
VXLAN EVPN Overlay Ethernet Segment Identifier Step Type: string Default: 00:00:00:00:00:00:00:00:00 |
||||||||||||||||
VxlanEthernetSegmentValueType |
VXLAN EVPN Overlay EthernetSegmentValueType Type: enum Default: TYPE0 Possible Values:
|
||||||||||||||||
VxlanEthernetTagId |
VXLAN EVPN Overlay Ethernet Tag ID Type: u32 Default: 0 |
||||||||||||||||
VxlanEvpnEnablePackRoutes |
Enable or disable Pack Route Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanEvpnRouterMacExtCommunity |
VXLAN EVPN Overlay Router MAC Extended community Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanNextHop |
VXLAN EVPN Overlay Overwrite the NexHop Address Type: ip Default: 192.168.100.2 |
||||||||||||||||
VxlanNextHopDeviceStep |
NexHop ip address Type: ip Default: 0.0.0.1 |
||||||||||||||||
VxlanNextHopIpv6Addr |
Specifies the VTEP NextHop IPv6 Address to be configured if VTEP encap is IPv6 Type: ipv6 Default: 2000::1 |
||||||||||||||||
VxlanNextHopIpv6AddrDeviceStep |
Specifies the VTEP NextHop IPv6 Address Device step to be configured if VTEP encap is IPv6 Type: ipv6 Default: 0::1 |
||||||||||||||||
VxlanNextHopIpv6AddrPortStep |
Specifies the VTEP NextHop IPv6 Address port step to be configured if VTEP encap is IPv6 Type: ipv6 Default: 0::1 |
||||||||||||||||
VxlanNextHopIpv6LinkLocalAddr |
Specifies the VTEP NextHop IPv6 Link Local Address to be configured if VTEP encap is IPv6 Type: ipv6 Default: FE80::1 |
||||||||||||||||
VxlanNextHopIpv6LinkLocalAddrDeviceStep |
Specifies the VTEP NextHop IPv6 Link Local Address Device step to be configured if VTEP encap is IPv6 Type: ipv6 Default: 0::1 |
||||||||||||||||
VxlanNextHopIpv6LinkLocalAddrPortStep |
Specifies the VTEP NextHop IPv6 Link Local Address port step to be configured if VTEP encap is IPv6 Type: ipv6 Default: 0::1 |
||||||||||||||||
VxlanNextHopPortStep |
NexHop ip address Step Type: ip Default: 0.0.0.1 |
||||||||||||||||
VxlanWizardAdRoute |
VXLAN EVPN Overlay Ad Route configuration Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanWizardAdRouteEsi |
VXLAN EVPN Overlay Add AD Route for per EIS Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanWizardAdRouteEvi |
VXLAN EVPN Overlay Add AD Route for per EVI Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanWizardEthernetSegmentRoute |
VXLAN EVPN Overlay Type-4 Ethernet Segment Route Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanWizardInclusiveMulticastRoute |
VXLAN EVPN Overlay Type-3 Inclusive Multicast Route Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanWizardIpPrefixRoute |
VXLAN EVPN Overlay Type-5 IP Prefix Route Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanWizardIpUnicastRoute |
VXLAN EVPN Overlay IP Unicast Route Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanWizardIpv6UnicastRoute |
Creates the IPv6 Unicast Route for the Active BGP device. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||
VxlanWizardMacAndIpRoute |
VXLAN EVPN Overlay Type-2 MAC IP Route is Enable Type: bool Default: TRUE Possible Values:
|
||||||||||||||||
VxlanWizardMacIpRoute |
VXLAN EVPN Overlay by defult Type-2 MAC IP Route is Enable Type: bool Default: TRUE Possible Values:
|
||||||||||||||||
VxlanWizardMacOnlyRoute |
VXLAN EVPN Overlay Type-2 MAC Route only Type: bool Default: FALSE Possible Values:
|
There are no read-only attributes.