Description:
IEEE 1588v2 clock synchronization results.
Parents: Ieee1588v2ClockConfig
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| ResultParent (ResultChild) |
Use this to connect a results object to an object. |
There are no writable attributes.
| Read-Only Attribute | Description |
|---|---|
| AvgMeanPathDelay |
Average mean propagation delay between two ports. Type: s64 Default: 0 |
| AvgOffset |
Average Offset Type: s64 Default: 0 |
| AvgOffsetMinusDeviation |
Difference between the average offset and the deviation in nanoseconds. Type: s64 Default: 0 |
| AvgOffsetPlusDeviation |
Sum of the average offset and the deviation in nanoseconds. Type: s64 Default: 0 |
| CurrentMeanPathDelay |
Mean propagation delay between two ports. Type: s64 Default: 0 |
| CurrentOffset |
Current value of the time difference between a master and a slave as computed by the slave in nanoseconds. Type: s64 Default: 0 |
| FollowUpCorrectionField |
Value of the followup message correction field. Type: s64 Default: 0 |
| FollowUpSequenceId |
Sequence Id in Follow Up packet Type: s64 Default: 0 |
| FpgaTimeInNanoSeconds |
FPGA Time in nano seconds Type: u64 Default: 0 |
| InvalidTimestampCount |
Number of invalid timestamps received Type: u32 Default: 0 |
| LogMinDelayRequestInterval |
Minimum permitted mean time interval between successive Pdelay_Req message. Type: s8 Default: 0 |
| MaxMeanPathDelay |
Maximum mean propagation delay between two ports. Type: s64 Default: 0 |
| MeanPathDelayAtPeak |
Mean path delay at peak offset Type: s64 Default: 0 |
| MinMeanPathDelay |
Minimum mean propagation delay between two ports. Type: s64 Default: 0 |
| NegativeOffsetPeak |
Maximum value of the negative offset in nanoseconds. Type: s64 Default: 0 |
| OffsetDeviation |
Distance of the offset from the mean in nanoseconds. Type: s64 Default: 0 |
| OffsetStandardDeviation |
Standard deviation from the mean of the offset.. Type: s64 Default: 0 |
| PdelayRespCorrectionField |
Value of the Pdelay_Resp message correction field. Type: s64 Default: 0 |
| PdelayRespFollowUpCorrectionField |
Value of the PdelayRespFollowUp message correction field. Type: s64 Default: 0 |
| PeerMeanPathDelay |
An estimate of the current one-way propagation delay on the link. Type: s64 Default: 0 |
| PositiveOffsetPeak |
Maximum value of the positive offset in nanoseconds. Type: s64 Default: 0 |
| PtpTrafficStartTimeInNanoSeconds |
Show PTP Traffic Start time In Nano Seconds Type: u64 Default: 0 |
| RateRatio |
Rate Ratio Type: double Default: 0 |
| StepRemoved |
Number of communication paths traversed between the local clock and the grandmaster clock. Type: u64 Default: 0 |
| SyncCorrectionField |
Value of the Sync message correction field. Type: s64 Default: 0 |
| SyncSequenceId |
Sequence Id in Sync packet Type: s64 Default: 0 |
| T1InNanoSeconds |
Time at which the master sent a sync message. Type: u64 Default: 0 |
| T1InNanoSecondsAtPeak |
Time at which sync message sent Type: u64 Default: 0 |
| T1TimeError |
Error between Sync sent time and received time Type: s64 Default: 0 |
| T2InNanoSeconds |
Time at which the slave received a sync message. Type: u64 Default: 0 |
| T2InNanoSecondsAtPeak |
Time at which sync message received Type: u64 Default: 0 |
| T3InNanoSeconds |
Time at which the slave sent a delay request message. Type: u64 Default: 0 |
| T3InNanoSecondsAtPeak |
Time at which delay request message sent Type: u64 Default: 0 |
| T4InNanoSeconds |
Time at which the master received a delay request message. Type: u64 Default: 0 |
| T4InNanoSecondsAtPeak |
Time at which delay request message received Type: u64 Default: 0 |
| T4TimeError |
Error between Delay/pDelay request sent time and received time Type: s64 Default: 0 |
| TimeOfDay |
Current time of day Type: string Default: 01 January 1970 12:00:00.000000000 |
| TimeOfDayInNanoSeconds |
Time of day in nanoseconds Type: u64 Default: 0 |
| TimeOfDayInUtc |
Shows Time of day in UTC format Type: string Default: 01 January 1970 12:00:00.000000000 |