Description:
DCB step test per iteration result.
Result children (automatically created): BenchmarkTrafficGroupPerIterationResult, DcbTrafficGroupPerIterationResult, Rfc2544TrafficGroupPerIterationResult
There are no writable attributes.
Read-Only Attribute | Description |
---|---|
AvgInterarrivalTime |
Average interarrival time in uSec. Type: double Default: 0 |
AvgJitter |
Average jitter measurement in uSec. Type: double Default: 0 |
AvgLatency |
Average latency value in uSec. Type: double Default: 0 |
ChecksumErrorCount |
Number of frames with checksum errors received by the test tool. Type: u64 Default: 0 |
ClassificationGroupPassCount |
Number of classification groups that meet the iteration pass criteria. Type: u16 Default: 0 |
ClassificationGroupTotalCount |
Number of classification groups in this test. Type: u16 Default: 0 |
DroppedFrameCount |
Number of frames dropped by the DUT. Type: u64 Default: 0 |
DroppedFramePct |
Percentage of frames dropped by the DUT. Type: double Default: 0 |
DuplicateFrameCount |
Number of duplicate frames received by the test tool. Type: u64 Default: 0 |
DurationInSec |
Test duration in seconds. Type: double Default: 0 |
ExpectedRxFrameCount |
Number of test frames the test tool expected. Type: u64 Default: 0 |
FcsErrorFrameCount |
Number of frames with FCS errors received by the test tool. Type: u64 Default: 0 |
FloodedFrameCount |
Number of flooded frames received on this port. Type: u64 Default: 0 |
ForwardingRate |
Observed forwarding rate of the DUT in fps. Type: double Default: 0 |
IntendedLoad |
Load configured by the test on the generator(s). Type: double Default: 0 |
IntendedMbpsLoad |
Load, in Mbps, configured by the test on the generator(s). Type: double Default: 0 |
MaxInterarrivalTime |
Maximum interarrival time in uSec. Type: double Default: 0 |
MaxJitter |
Maximum jitter measurement in uSec. Type: double Default: 0 |
MaxLatency |
Maximum latency value in uSec. Type: double Default: 0 |
MinInterarrivalTime |
Minimum interarrival time in uSec. Type: double Default: 0 |
MinJitter |
Minimum jitter measurement in uSec. Type: double Default: 0 |
MinLatency |
Minimum latency value in uSec. Type: double Default: 0 |
OfferedAvgFrameSize |
Actual, average frame size transmitted by the generator(s) [SUM(Tx Octets)/SUM(Tx Frames)]. Type: double Default: 0 |
OfferedLoad |
Actual, measured load offered by the generator(s). Type: double Default: 0 |
OfferedMbpsLoad |
Actual, measured load, in Mbps, offered by the generator(s). Type: double Default: 0 |
OtherFrameCount |
Number of non-test frames received by the test tool, for example, router protocol traffic, bridge management traffic, etc. Type: u64 Default: 0 |
OutSeqFrameCount |
Number of frames that were out of sequence. Type: u64 Default: 0 |
PauseFrameCount |
Number of pause frames received by the test tool. Type: u64 Default: 0 |
PfcFrameCount |
Number of PFC pause frames received by the test tool. Type: u64 Default: 0 |
PfcPri0FrameCount |
Indicates how many PFC frames were detected on priority 0. Type: u64 Default: null |
PfcPri0Quanta |
Measured pause duration of the generator(s) on priority 0. Type: u64 Default: null |
PfcPri0TriggerCount |
Indicates how many PFC frames were detected by port capture triggers on priority 0 (only used when the hardware lacks PFC counter support). Type: u64 Default: null |
PfcPri1FrameCount |
Indicates how many PFC frames were detected on priority 1. Type: u64 Default: null |
PfcPri1Quanta |
Measured pause duration of the generator(s) on priority 1. Type: u64 Default: null |
PfcPri1TriggerCount |
Indicates how many PFC frames were detected by port capture triggers on priority 1 (only used when the hardware lacks PFC counter support). Type: u64 Default: null |
PfcPri2FrameCount |
Indicates how many PFC frames were detected on priority 2. Type: u64 Default: null |
PfcPri2Quanta |
Measured pause duration of the generator(s) on priority 2. Type: u64 Default: null |
PfcPri2TriggerCount |
Indicates how many PFC frames were detected by port capture triggers on priority 2 (only used when the hardware lacks PFC counter support). Type: u64 Default: null |
PfcPri3FrameCount |
Indicates how many PFC frames were detected on priority 3. Type: u64 Default: null |
PfcPri3Quanta |
Measured pause duration of the generator(s) on priority 3. Type: u64 Default: null |
PfcPri3TriggerCount |
Indicates how many PFC frames were detected by port capture triggers on priority 3 (only used when the hardware lacks PFC counter support). Type: u64 Default: null |
PfcPri4FrameCount |
Indicates how many PFC frames were detected on priority 4. Type: u64 Default: null |
PfcPri4Quanta |
Measured pause duration of the generator(s) on priority 4. Type: u64 Default: null |
PfcPri4TriggerCount |
Indicates how many PFC frames were detected by port capture triggers on priority 4 (only used when the hardware lacks PFC counter support). Type: u64 Default: null |
PfcPri5FrameCount |
Indicates how many PFC frames were detected on priority 5. Type: u64 Default: null |
PfcPri5Quanta |
Measured pause duration of the generator(s) on priority 5. Type: u64 Default: null |
PfcPri5TriggerCount |
Indicates how many PFC frames were detected by port capture triggers on priority 5 (only used when the hardware lacks PFC counter support). Type: u64 Default: null |
PfcPri6FrameCount |
Indicates how many PFC frames were detected on priority 6. Type: u64 Default: null |
PfcPri6Quanta |
Measured pause duration of the generator(s) on priority 6. Type: u64 Default: null |
PfcPri6TriggerCount |
Indicates how many PFC frames were detected by port capture triggers on priority 6 (only used when the hardware lacks PFC counter support). Type: u64 Default: null |
PfcPri7FrameCount |
Indicates how many PFC frames were detected on priority 7. Type: u64 Default: null |
PfcPri7Quanta |
Measured pause duration of the generator(s) on priority 7. Type: u64 Default: null |
PfcPri7TriggerCount |
Indicates how many PFC frames were detected by port capture triggers on priority 7 (only used when the hardware lacks PFC counter support). Type: u64 Default: null |
RxFrameCount |
Number of test frames received by the test tool. Type: u64 Default: 0 |
TrialNum |
Trial number. Type: u8 Default: 0 |
TxFrameCount |
Number of test frames transmitted by the test tool. Type: u64 Default: 0 |
TxFrameRate |
Test tools transmission rate in fps. Note that this does not indicate the actual rate of test frames transmitted by the test tool. Type: double Default: 0 |