Dhcpv4BlockResults Object


Description:

DHCPv4 Block Results.

Parents: Dhcpv4BlockConfig

Relations:

Side name
(Type)
Relative Description
ResultParent
(ResultChild)

Dhcpv4BlockConfig

Use this to connect a results object to an object.

Dhcpv4BlockResults Writable Attributes

There are no writable attributes.

Dhcpv4BlockResults Read-Only Attributes

Read-Only Attribute Description
AttemptRate

Attempt rate in sessions per second.

Type: double

Default: 0

BindRate

Binding rate in sessions per second.

Type: double

Default: 0

CurrentAttemptCount

Number of hosts in the block that are in the process of attempting to bind and are sending or receiving DHCP messages.

Type: u32

Default: 0

CurrentBoundCount

Number of DHCP sessions that are currently bound. This statistic should match the DUT's "Leased Count" statistic.

Type: u32

Default: 0

CurrentIdleCount

Number of DHCP sessions currently in the Idle state (sessions that have been programmed but are not being attempted).

Type: u32

Default: 0

Dnav4FailedCount

Number of DNAv4 requests failed.

Type: u32

Default: 0

Dnav4RetryCount

Number of DNAv4 requests retried.

Type: u32

Default: 0

ElapsedTime

Elapsed time.

Type: double

Default: 0

RxAckCount

Number of DHCPACK messages received.

Type: u32

Default: 0

RxAuthenticationFailCount

Rx Authentication Fail Counter

Type: u32

Default: 0

RxDnav4ReplyCount

Number of DNAv4 replies received.

Type: u32

Default: 0

RxForceRenewCount

Number of DHCP Force Renews (unicast DHCPREQUEST messages) received.

Type: u32

Default: 0

RxGarpCount

Number of GARP packets receeived per device.

Type: u32

Default: 0

RxNakCount

Number of DHCPNAK messages received.

Type: u32

Default: 0

RxOfferCount

Number of DHCPOFFER messages received.

Type: u32

Default: 0

TotalAttemptCount

Total number of sessions attempted (both past and current).

Type: u32

Default: 0

TotalBoundCount

Total number of bound sessions (both past and current).

Type: u32

Default: 0

TotalFailedCount

Total number of DHCP hosts in the block that have failed to bind (both past and current). Failures may be due to DUT overload, a T1 timer expiration, or reaching the number of retries for the session.

Type: u32

Default: 0

TotalRebootedCount

Number of DHCPv4 reboot commands issued.

Type: u32

Default: 0

TotalRenewedCount

Total number of renewed sessions.

Type: u32

Default: 0

TotalRetriedCount

Total number of times DHCPDISCOVER and DHCPREQUEST messages have been retried.

Type: u32

Default: 0

TxDeclineCount

Number of packets declined per device.

Type: u32

Default: 0

TxDiscoverCount

Number of DHCPDISCOVER messages sent.

Type: u32

Default: 0

TxDnav4RequestCount

Number of DNAv4 requests sent.

Type: u32

Default: 0

TxGarpCount

Number of GARP packets transmited per device.

Type: u32

Default: 0

TxRebindCount

Number of DHCP Rebinds (broadcast DHCPREQUEST messages).

Type: u32

Default: 0

TxRebootCount

Total number of rebooted sessions.

Type: u32

Default: 0

TxReleaseCount

Number of DHCPRELEASE messages sent.

Type: u32

Default: 0

TxRenewCount

Number of DHCP Renews (unicast DHCPREQUEST messages).

Type: u32

Default: 0

TxRequestCount

Number of DHCPREQUEST messages sent.

Type: u32

Default: 0