Description:
Parameters to retrieve IQ samples from capture file.
Automatically created from: Project
Attribute | Description | ||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||||||||||||||||||||||||||||||
CaptureFileName |
Retrieve IQ Samples from the configured capture file Type: inputFilePath Default: "" (empty string) |
||||||||||||||||||||||||||||||||||
DstMacAddr |
Retrieve IQ samples from user data packets with configured Destination MAC Address Type: mac Default: 01:80:c2:00:00:0e |
||||||||||||||||||||||||||||||||||
EaxcId |
Retrieve IQ samples from user data packets with configured eAxC ID Type: u16 Default: 0x0010 Range: 0 - 65535 |
||||||||||||||||||||||||||||||||||
EnableEcpriOverIp |
Enable if eCPRI encapsulation is over IPv4/IPv6 in the user data packets Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||
EnableMacAddrFilter |
Enable to apply MAC address filter on the user data packets Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||
EnableUdCompHdr |
Enable if user data compression header is present in the user data packets Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||
IqSampleFileRadioFrameCount |
Retrieve IQ samples from the configured number of radio frames Type: u8 Default: 1 Range: 1 - 4 |
||||||||||||||||||||||||||||||||||
SrcMacAddr |
Retrieve IQ samples from user data packets with configured Source MAC Address Type: mac Default: 00:10:94:00:00:01 |
||||||||||||||||||||||||||||||||||
UdCompressionMethod |
Compression Method if user data compression header is not present in the user data packets Type: enum Default: BLOCK_FLOATING_POINT Possible Values:
|
||||||||||||||||||||||||||||||||||
UdMantissaMode |
Mantissa Mode (IQ Width) if user data compression header is not present in the user data packets Type: enum Default: MANTISSA_9_BIT Possible Values:
|
||||||||||||||||||||||||||||||||||
UdpPort |
Configure the UDP source or destination port if eCPRI encapsulation is over IPv4/IPv6 in the user data packets Type: u16 Default: 1024 |
There are no read-only attributes.