Description:
FCoE generator right side test parameters.
Automatically created from: FcoeTestGenParams
Automatically-created children: FcoeSideDcbxTlvConfig
Attribute | Description | ||||||||
---|---|---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||||
DomainId |
Domain ID of a switch in a fabric. Type: u8 Default: 16 |
||||||||
DomainIdStep |
Domain ID Step. Type: u8 Default: 1 Range: 1 - 255 |
||||||||
ENodeCountPerDevice |
Number of E-Nodes per Emulated Device. Type: u32 Default: 1 |
||||||||
FcMap |
FC map. Type: u32 Default: 0x0EFC00 |
||||||||
FcMapStep |
FC map step. Type: u32 Default: 1 Range: 1 - 1000 |
||||||||
FipPriority |
FIP priority. Type: u8 Default: 100 |
||||||||
HostsPerPortCount |
Number of hosts per port. Type: u16 Default: 1 Range: 1 - 1000 |
||||||||
HostType |
Nost type is initiator or target. Type: enum Default: INITIATOR Possible Values:
|
||||||||
MsgTxHoldMultiplier |
Used to calculate how long to retain information. This value is multiplied by Message Tx Interval to establish the time to live value. Type: u8 Default: 4 Range: 2 - 10 |
||||||||
MsgTxInterval |
Interval (in seconds) between successive transmit cycles. Used in configuring LLDP/DCBX. Type: u16 Default: 30 Range: 5 - 32768 |
||||||||
ReinitializeDelay |
Delay (in seconds) after LLDP adminStatus becomes disabled before re-initialization is attempted. Type: u8 Default: 2 Range: 1 - 10 |
||||||||
StartWorldWideNodeName |
Starting world wide node name. Type: wwn Default: 10:00:10:94:00:00:00:01 |
||||||||
StartWorldWidePortName |
Starting world wide port name. Type: wwn Default: 20:00:10:94:00:00:00:01 |
||||||||
TxDelay |
Minimum delay (in seconds) between successive LLDP message transmissions. Type: u16 Default: 2 Range: 1 - 8192 |
||||||||
UseWorldWidePortName |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Use the world wide port name. Type: bool Default: TRUE Possible Values:
|
||||||||
VnportsPerEnode |
VN_Ports per enode. Type: u16 Default: 1 Range: 1 - 2000 |
||||||||
WorldWideNodeNameStep |
Step of world wide node name. Type: wwn Default: 00:00:00:00:00:00:00:01 |
||||||||
WorldWidePortNameStep |
Step of world wide port name. Type: wwn Default: 00:00:00:00:00:00:00:01 |
There are no read-only attributes.