Description:
Result object to store port results on the generator.
Parents: Generator
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| ResultParent (ResultChild) |
Use this to connect a results object to an object. |
There are no writable attributes.
| Read-Only Attribute | Description |
|---|---|
| CounterTimestamp |
Time when the counter was stored. This value is derived from the TestCenter chassis time sync source. The unit is 10 nanoseconds. Type: u64 Default: 0 |
| GeneratorAbortFrameCount |
Number of abort frames generated. Type: u64 Default: 0 |
| GeneratorAbortFrameRate |
Number of abort frames generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorBitRate |
Total number of bits generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorCrcErrorFrameCount |
Number of CRC error frames generated. Type: u64 Default: 0 |
| GeneratorCrcErrorFrameRate |
Number of CRC error frames generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorFrameCount |
Number of frames generated. Type: u64 Default: 0 |
| GeneratorFrameRate |
Total number of frames generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorIpv4FrameCount |
Number of IPv4 frames generated. Type: u64 Default: 0 |
| GeneratorIpv4FrameRate |
Total number of IPv4 frames generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorIpv6FrameCount |
Number of IPv6 frames generated. Type: u64 Default: 0 |
| GeneratorIpv6FrameRate |
Total number of IPv6 frames generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorJumboFrameCount |
Number of jumbo frames generated. Type: u64 Default: 0 |
| GeneratorJumboFrameRate |
Number of jumbo frames generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorL3ChecksumErrorCount |
Number of L3 checksum errors generated. Type: u64 Default: 0 |
| GeneratorL3ChecksumErrorRate |
Number of L3 header checksum errors generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorL4ChecksumErrorCount |
Number of L4 checksum errors generated. Type: u64 Default: 0 |
| GeneratorL4ChecksumErrorRate |
Number of L4 header checksum errors generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorMplsFrameCount |
Number of MPLS frames generated. Type: u64 Default: 0 |
| GeneratorMplsFrameRate |
Total number of MPLS frames generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorOctetCount |
Number of bytes generated. Type: u64 Default: 0 |
| GeneratorOctetRate |
Total number of bytes generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorOversizeFrameCount |
Number of oversized frames generated. Type: u64 Default: 0 |
| GeneratorOversizeFrameRate |
Number of oversized frames generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorSigFrameCount |
Number of Spirent signature frames generated. Type: u64 Default: 0 |
| GeneratorSigFrameRate |
Total number of Spirent signature frames generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorUndersizeFrameCount |
Number of undersized frames generated. Type: u64 Default: 0 |
| GeneratorUndersizeFrameRate |
Number of undersized frames generated over the last 1-second interval. Type: u64 Default: 0 |
| GeneratorVlanFrameCount |
Number of VLAN frames generated. Type: u64 Default: 0 |
| GeneratorVlanFrameRate |
Total number of VLAN frames generated over the last 1-second interval. Type: u64 Default: 0 |
| HwFrameCount |
Number of hardware frames transmitted. Type: u64 Default: 0 |
| L1BitCount |
Count of total layer1 bits generated. Type: u64 Default: 0 |
| L1BitRate |
Total number of layer1 bits transmitted over last 1-second interval. Type: u64 Default: 0 |
| L1BitRatePercent |
Total number of layer 1 bits transmitted in percentage. Type: double Default: 0 |
| PfcFrameCount |
Number of pause frames generated. Type: u64 Default: null |
| PfcPri0FrameCount |
Number of priority0 pause frames generated. Type: u64 Default: null |
| PfcPri1FrameCount |
Number of priority1 pause frames generated. Type: u64 Default: null |
| PfcPri2FrameCount |
Number of priority2 pause frames generated. Type: u64 Default: null |
| PfcPri3FrameCount |
Number of priority3 pause frames generated. Type: u64 Default: null |
| PfcPri4FrameCount |
Number of priority4 pause frames generated. Type: u64 Default: null |
| PfcPri5FrameCount |
Number of priority5 pause frames generated. Type: u64 Default: null |
| PfcPri6FrameCount |
Number of priority6 pause frames generated. Type: u64 Default: null |
| PfcPri7FrameCount |
Number of priority7 pause frames generated. Type: u64 Default: null |
| TotalBitCount |
Count of total bits generated. Type: u64 Default: 0 |
| TotalBitRate |
Total number of bits transmitted over the last 1-second interval. Type: u64 Default: 0 |
| TotalCellCount |
Count of total cells generated. Type: u64 Default: 0 |
| TotalCellRate |
Total number of bytes generated over last 1-second interval. Type: u64 Default: 0 |
| TotalFrameCount |
Total number of frames transmitted. Type: u64 Default: 0 |
| TotalFrameRate |
Total number of frames transmitted over the last 1-second interval. Type: u64 Default: 0 |
| TotalIpv4FrameCount |
Total number of IPv4 frames transmitted. Type: u64 Default: 0 |
| TotalIpv4FrameRate |
Total number of IPv4 frames transmitted over the last 1-second interval. Type: u64 Default: 0 |
| TotalIpv6FrameCount |
Total number of IPv6 frames transmitted. Type: u64 Default: 0 |
| TotalIpv6FrameRate |
Total number of IPv6 frames transmitted over the last 1-second interval. Type: u64 Default: 0 |
| TotalMplsFrameCount |
Total number of MPLS frames transmitted. Type: u64 Default: 0 |
| TotalMplsFrameRate |
Total number of MPLS frames transmitted over the last 1-second interval. Type: u64 Default: 0 |
| TotalOctetCount |
Total number of bytes transmitted. Type: u64 Default: 0 |
| TotalOctetRate |
Total number of bytes transmitted over the last 1-second interval. Type: u64 Default: 0 |
| TxDuration |
Generator on time in seconds. Type: double Default: 0 |
| TxQueueFullDropCount |
Number of frames which were not transmitted due to Tx queue full condition. This only applies to virtual ports. Type: u64 Default: 0 |
| TxQueueFullRetryCount |
Number of frames which were delayed due to Tx queue full condition. This only applies to virtual ports. Type: u64 Default: 0 |