Description:
IEEE 1588v2 clock results.
Parents: Ieee1588v2ClockConfig
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
ResultParent (ResultChild) |
Use this to connect a results object to an object. |
There are no writable attributes.
Read-Only Attribute | Description |
---|---|
ClockAccuracy |
Clock accuracy. Type: u8 Default: 0 |
ClockDomain |
Clock domain. Type: u8 Default: 0 |
ClockIdentity |
Clock identity. Type: u64 Default: 0 |
DroppedAnnounceCount |
Dropped Announce Count Type: u64 Default: 0 |
DroppedDelayRequestCount |
Number of Delay Request messages dropped. Type: u64 Default: 0 |
DroppedDelayResponseCount |
Number of Delay Response messages dropped. Type: u64 Default: 0 |
DroppedFollowUpCount |
Number of Follow Up messages dropped. Type: u64 Default: 0 |
DroppedSyncCount |
Number of Sync messages dropped. Type: u64 Default: 0 |
FollowUpNotReceivedCount |
Number of received follow up packet sequnce id ipackets that do not match the sync packet sequnce id within the configured interval. Type: u64 Default: 0 |
PortNum |
Clock port number. Type: u16 Default: 0 |
RxAnnounceCount |
Number of Announce messages received. Type: u64 Default: 0 |
RxDelayRequestCount |
Number of Delay_Req messages received. Type: u64 Default: 0 |
RxDelayResponseCount |
Number of Delay_Resp messages received. Type: u64 Default: 0 |
RxFollowUpCount |
Number of Follow_Up messages received. Type: u64 Default: 0 |
RxInvalidFollowUpCount |
Number of unexpected or rogue sequnce Id follow up packets received. Type: u64 Default: 0 |
RxInvalidSyncCount |
Number of unexpected or rogue sequnce Id sync packets received. Type: u64 Default: 0 |
RxManagementMsgCount |
Rx Counter to keep track of Management message. Type: u64 Default: 0 |
RxPeerDelayRequestCount |
Number of Pdelay_Req messages received. Type: u64 Default: 0 |
RxPeerDelayResponseCount |
Number of Pdelay_Resp messages received. Type: u64 Default: 0 |
RxPeerDelayResponseFollowUpCount |
Number of Pdelay_Resp_Follow_Up messages received. Type: u64 Default: 0 |
RxSignalingCount |
Number of Signaling messages received. Type: u64 Default: 0 |
RxSyncCount |
Number of Sync messages received. Type: u64 Default: 0 |
SyncNotReceivedCount |
Number of Sync packets not received within the configured log interval. Type: u64 Default: 0 |
TxAnnounceCount |
Number of Announce messages sent. Type: u64 Default: 0 |
TxDelayRequestCount |
Number of Delay_Req messages sent. Type: u64 Default: 0 |
TxDelayResponseCount |
Number of Delay_Resp messages sent. Type: u64 Default: 0 |
TxFollowUpCount |
Number of Follow_Up messages sent. Type: u64 Default: 0 |
TxManagementMsgCount |
Tx Counter to keep track of Management message. Type: u64 Default: 0 |
TxPeerDelayRequestCount |
Number of Pdelay_Req messages sent. Type: u64 Default: 0 |
TxPeerDelayResponseCount |
Number of Pdelay_Resp messages sent. Type: u64 Default: 0 |
TxPeerDelayResponseFollowUpCount |
Number of Pdelay_Resp_Follow_Up messages sent. Type: u64 Default: 0 |
TxSignalingCount |
Number of Signaling messages sent. Type: u64 Default: 0 |
TxSyncCount |
Number of Sync messages sent. Type: u64 Default: 0 |