Current state of the clock.
| Value |
Description |
| IEEE1588_STATE_NONE |
No state detected.
|
| IEEE1588_STATE_INITIALIZING |
Initializing data sets, hardware, and communication
facilities.
|
| IEEE1588_STATE_FAULTY |
Multiple Pdelay_Resp messages were received.
|
| IEEE1588_STATE_DISABLED |
Does not implement the delay mechanism.
|
| IEEE1588_STATE_LISTENING |
Waiting for the announceReceiptTimeout to expire or to receive an
Announce message from a master.
|
| IEEE1588_STATE_PRE_MASTER |
No Announce message was received within the required time.
Allowing changes to propagate from points in the system between the local
clock and possible masters visible from the port before assuming the Master
state.
|
| IEEE1588_STATE_MASTER |
Operating as the master clock.
|
| IEEE1588_STATE_PASSIVE |
Not the master on the path. Not synchronizing to a
master.
|
| IEEE1588_STATE_UNCALIBRATED |
One or more master ports have been detected in the
domain.
|
| IEEE1588_STATE_SLAVE |
Synchronizing to the selected master port.
|
| IEEE1588_STATE_LINK_DOWN |
Port link is down
|
| IEEE1588_STATE_NOT_APPLICABLE |
For Device block state is shown as Not applicable.
|