Ieee80211AccessPointResults Object

HOME | TECHNOLOGIES | TEST CONFIGURATION | SEQUENCER COMMANDS | GUI COMMAND NAMES | ALL COMMANDS | RESULT | PDU | ALL | OBJECT TREE

Description:

IEEE 802.11 Access Point Results / Advanced Results

Parents: Ieee80211AccessPointConfig

Relations:

Side name
(Type)		 Relative Description
ResultParent
(ResultChild)

Ieee80211AccessPointConfig

Use this to connect a results object to an object.

Ieee80211AccessPointResults Writable Attributes

There are no writable attributes.

Ieee80211AccessPointResults Read-Only Attributes

Read-Only Attribute Description
Authenticated

Authentication status.

Type: enum

Default: BT_FAIL

Possible Values:

Value Description
BT_FAIL

Authentication failed.
BT_PASS

Authorization passed.
Authorized

Authorization status.

Type: enum

Default: BT_FAIL

Possible Values:

Value Description
BT_FAIL

Authorization failed.

BT_PASS

Authorization passed.

AveSignalStrength

Average strength of the signal in dBm.

Type: u8

Default: 0
MacAddress

MacAddress of the AP Device

Type: mac

Default: 00-00-00-00-00-00
MfpEnabled

Status of management frame protection flag.

Type: enum

Default: BT_DISABLED

Possible Values:

Value Description
BT_DISABLED

MFP is disabled.

BT_ENABLED

MFP is enabled.

PreambleType

Preamble type

Type: enum

Default: PREAMBLE_TYPE_NA

Possible Values:

Value Description
PREAMBLE_TYPE_NA

N/A

PREAMBLE_TYPE_SHORT

Preamble type is set to Short.
PREAMBLE_TYPE_LONG

Preamble type is set to Long.
RxBytes

Number of bytes received.

Type: u64

Default: 0
RxChnWidth

Width of the receive channel in megahertz.

Type: enum

Default: CHANNEL_WIDTH_NA

Possible Values:

Value Description
CHANNEL_WIDTH_NA

N/A

CHANNEL_WIDTH_20M

Channel width is set to 20MHz.
CHANNEL_WIDTH_40M

Channel width is set to 40MHz.
CHANNEL_WIDTH_80M

Channel width is set to 80MHz.
CHANNEL_WIDTH_80M_80M

Channel width is set to 80+80MHz.
CHANNEL_WIDTH_160M

Channel width is set to 160MHz.
RxGI

Receive guard interval mode.

Type: enum

Default: GUARDINTERVAL_MODE_SHORT

Possible Values:

Value Description
GUARDINTERVAL_MODE_AUTO

Auto
GUARDINTERVAL_MODE_LONG

Guard interval mode is set to Long.
GUARDINTERVAL_MODE_SHORT

Guard interval mode is set to Short.
GUARDINTERVAL_MODE_DLONG

Guard interval mode is set to Extra Long.
RxMcsType

MCS type received.

Type: enum

Default: MCS_TYPE_NA

Possible Values:

Value Description
MCS_TYPE_NA

MCS not available.
MCS_BPSK

MCS type is set to binary phase-shift keying.
MCS_QPSK_1_2

MCS type is set to quadrature phase-shift keying
MCS_QPSK_3_4

MCS type is set to quadrature phase-shift keying with 3/4 FEC.

MCS_16_QAM_1_2

MCS type is set to 16 quadrature amplitued modulation, 1/2 coding rate.

MCS_16_QAM_3_4

MCS type is set to 16 quadrature amplitude modulation, 3/4 coding rate.

MCS_64_QAM_2_3

MCS type is set to 64 quadrature amplitude modulation, 2/3 coding rate.

MCS_64_QAM_3_4

MCS type is set to 64 quadrature amplitude modulation, 3/4 coding rate.

MCS_64_QAM_5_6

MCS type is set to 64 quadrature amplitude modulation, 5/6 coding rate.

MCS_256_QAM_3_4

MCS type is set to 256 quadrature amplitude modulation, 3/4 coding rate.

MCS_256_QAM_5_6

MCS type is set to 256 quadrature amplitude modulation, 5/6 coding rate.

MCS_1024_QAM_3_4

MCS type is set to 1024 quadrature amplitude modulation, 3/4 coding rate.

MCS_1024_QAM_5_6

MCS type is set to 1024 quadrature amplitude modulation, 5/6 coding rate.

MCS_2048_QAM

MCS is set to 2048 quadrature amplitude modulation.

MCS_4096_QAM

MCS is set to 4096 quadrature amplitude modulation.

RxNSS

Number of spatial streams received.

Type: u8

Default: 0
RxPackets

Number of frames received.

Type: u64

Default: 0
RxPktCntBW10Mhz

Number of 10 MHz bandwidth frames received.

Type: u32

Default: 0
RxPktCntBW160Mhz

Number of 160 MHz bandwidth frames received.

Type: u32

Default: 0
RxPktCntBW20Mhz

Number of 20 MHz bandwidth frames received.

Type: u32

Default: 0
RxPktCntBW40Mhz

Number of 40 MHz bandwidth frames received.

Type: u32

Default: 0
RxPktCntBW5Mhz

Number of 5 MHz bandwidth frames received.

Type: u32

Default: 0
RxPktCntBW80Mhz

Number of 80 MHz bandwidth frames received.

Type: u32

Default: 0
RxPktCntBW80P80Mhz

Number of 80+80 MHz bandwidth frames received.

Type: u32

Default: 0
RxPktCntGI1600ns

Number of 1600 ns guard interval farmes received.

Type: u32

Default: 0
RxPktCntGI3200ns

Number of 3200 ns guard interval farmes received.

Type: u32

Default: 0
RxPktCntGI400ns

Number of 400 ns guard interval farmes received.

Type: u32

Default: 0
RxPktCntGI800ns

Number of 800 ns guard interval farmes received.

Type: u32

Default: 0
RxPktCntGINA

Number of not-available guard interval farmes received.

Type: u32

Default: 0
RxPktCntMCS1

Number of MCS1 frames received.

Type: u32

Default: 0
RxPktCntMCS10

Number of MCS19 frames received.

Type: u32

Default: 0
RxPktCntMCS11

Number of MCS11 frames received.

Type: u32

Default: 0
RxPktCntMCS12

Number of MCS12 frames received.

Type: u32

Default: 0
RxPktCntMCS2

Number of MCS2 frames received.

Type: u32

Default: 0
RxPktCntMCS3

Number of MCS3 frames received.

Type: u32

Default: 0
RxPktCntMCS4

Number of MCS4 frames received.

Type: u32

Default: 0
RxPktCntMCS5

Number of MCS5 frames received.

Type: u32

Default: 0
RxPktCntMCS6

Number of MCS6 frames received.

Type: u32

Default: 0
RxPktCntMCS7

Number of MCS7 frames received.

Type: u32

Default: 0
RxPktCntMCS8

Number of MCS8 frames received.

Type: u32

Default: 0
RxPktCntMCS9

Number of MCS9 frames received.

Type: u32

Default: 0
RxPktCntMCSNA

Number of MCS not-available frames received.

Type: u32

Default: 0
RxPktCntNSS1

Number of NSS1 frames received.

Type: u32

Default: 0
RxPktCntNSS2

Number of NSS2 frames received.

Type: u32

Default: 0
RxPktCntNSS3

Number of NSS3 frames received.

Type: u32

Default: 0
RxPktCntNSS4

Number of NSS4 frames received.

Type: u32

Default: 0
RxPktCntNSS5

Number of NSS5 frames received.

Type: u32

Default: 0
RxPktCntNSS6

Number of NSS6 frames received.

Type: u32

Default: 0
RxPktCntNSS7

Number of NSS7 frames received.

Type: u32

Default: 0
RxPktCntNSS8

Number of NSS8 frames received.

Type: u32

Default: 0
RxPktCntRU106

Number of RU106 frames received.

Type: u32

Default: 0
RxPktCntRU242

Number of RU242 frames received.

Type: u32

Default: 0
RxPktCntRU26

Number of RU26 frames received.

Type: u32

Default: 0
RxPktCntRU484

Number of RU484 frames received.

Type: u32

Default: 0
RxPktCntRU52

Number of RU52 frames received.

Type: u32

Default: 0
RxPktCntRU996

Number of RU996 frames received.

Type: u32

Default: 0
RxPPDUType

Physical layer convergence protocol data unit type received.

Type: enum

Default: PPDU_TYPE_SU

Possible Values:

Value Description
PPDU_TYPE_SU

Single user.

PPDU_TYPE_MU_MIMO

Multi-user multiple-input multiple-output.

PPDU_TYPE_MU_OFDMA

Multi-user orthogonal frequency-division multiple access.

PPDU_TYPE_MU_MIMO_OFDMA

Multiple-input multiple-output orthogonal frequency-division multiple access.
PPDU_TYPE_UL_TRIG

UL-TRIG
PPDU_TYPE_BURST_BCN

BURST-BCN
PPDU_TYPE_UL_BSR_RESP

UL-BSR-RESP
PPDU_TYPE_UL_BSR_TRIG

UL-BSR-TRIG
PPDU_TYPE_UL_RESP

UL-RESP
PPDU_TYPE_UNKNOWN

Unknown
RxRate

Received data rate in bits per second.

Type: u64

Default: 0
RxRuIndex

Received RU assignment index.

Type: u16

Default: 0
RxRuType

Received RU type.

Type: enum

Default: RUTYPE_NA

Possible Values:

Value Description
RUTYPE_NA

No traffic/No OFDMA scheduling
RUTYPE_26_TONE

A 52-Tone RU consists of 24 data subcarriers and 2 pilot subcarriers.
RUTYPE_52_TONE

A 52-Tone RU consists of 48 data subcarriers and 4 pilot subcarriers.
RUTYPE_106_TONE

A 106-tone RU consists of 102 data subcarriers and 4 pilot subcarriers.
RUTYPE_242_TONE

A 242-tone RU consists of 234 data subcarriers and 8 pilot subcarriers.
RUTYPE_484_TONE

A 484-tone RU consists of 468 data subcarriers and 16 pilot subcarriers.
RUTYPE_996_TONE

A 996-tone RU consists of 980 data subcarriers and 16 pilot subcarriers.
SignalStrength

Strength of the signal in dBm.

Type: u8

Default: 0
StaMacAddress

MAC address of the client.

Type: mac

Default: 00-00-00-00-00-00
TdlsPeerEnabled

Status of tunneled direct link setup flag.

Type: enum

Default: BT_DISABLED

Possible Values:

Value Description
BT_DISABLED

TDLS is disabled.

BT_ENABLED

TDLS is enabled.

TxBytes

Number of bytes sent.

Type: u64

Default: 0
TxChnWidth

Width of the transmit channel in megahertz.

Type: enum

Default: CHANNEL_WIDTH_NA

Possible Values:

Value Description
CHANNEL_WIDTH_NA

N/A

CHANNEL_WIDTH_20M

Channel width is set to 20MHz.
CHANNEL_WIDTH_40M

Channel width is set to 40MHz.
CHANNEL_WIDTH_80M

Channel width is set to 80MHz.
CHANNEL_WIDTH_80M_80M

Channel width is set to 80+80MHz.
CHANNEL_WIDTH_160M

Channel width is set to 160MHz.
TxFails

Number of sent fails.

Type: u64

Default: 0
TxGI

Transmit guard interval mode.

Type: enum

Default: GUARDINTERVAL_MODE_SHORT

Possible Values:

Value Description
GUARDINTERVAL_MODE_AUTO

Auto
GUARDINTERVAL_MODE_LONG

Guard interval mode is set to Long.
GUARDINTERVAL_MODE_SHORT

Guard interval mode is set to Short.
GUARDINTERVAL_MODE_DLONG

Guard interval mode is set to Extra Long.
TxMcsType

MCS type transmitted.

Type: enum

Default: MCS_TYPE_NA

Possible Values:

Value Description
MCS_TYPE_NA

MCS not available.
MCS_BPSK

MCS type is set to binary phase-shift keying.
MCS_QPSK_1_2

MCS type is set to quadrature phase-shift keying
MCS_QPSK_3_4

MCS type is set to quadrature phase-shift keying with 3/4 FEC.

MCS_16_QAM_1_2

MCS type is set to 16 quadrature amplitued modulation, 1/2 coding rate.

MCS_16_QAM_3_4

MCS type is set to 16 quadrature amplitude modulation, 3/4 coding rate.

MCS_64_QAM_2_3

MCS type is set to 64 quadrature amplitude modulation, 2/3 coding rate.

MCS_64_QAM_3_4

MCS type is set to 64 quadrature amplitude modulation, 3/4 coding rate.

MCS_64_QAM_5_6

MCS type is set to 64 quadrature amplitude modulation, 5/6 coding rate.

MCS_256_QAM_3_4

MCS type is set to 256 quadrature amplitude modulation, 3/4 coding rate.

MCS_256_QAM_5_6

MCS type is set to 256 quadrature amplitude modulation, 5/6 coding rate.

MCS_1024_QAM_3_4

MCS type is set to 1024 quadrature amplitude modulation, 3/4 coding rate.

MCS_1024_QAM_5_6

MCS type is set to 1024 quadrature amplitude modulation, 5/6 coding rate.

MCS_2048_QAM

MCS is set to 2048 quadrature amplitude modulation.

MCS_4096_QAM

MCS is set to 4096 quadrature amplitude modulation.

TxNSS

Number of spatial streams sent.

Type: u8

Default: 0
TxPackets

Number of frames sent.

Type: u64

Default: 0
TxPktCntBW10Mhz

Number of 10 MHz bandwidth frames sent.

Type: u32

Default: 0
TxPktCntBW160Mhz

Number of 160 MHz bandwidth frames sent.

Type: u32

Default: 0
TxPktCntBW20Mhz

Number of 20 MHz bandwidth frames sent.

Type: u32

Default: 0
TxPktCntBW40Mhz

Number of 40 MHz bandwidth frames sent.

Type: u32

Default: 0
TxPktCntBW5Mhz

Number of 5 MHz bandwidth frames sent.

Type: u32

Default: 0
TxPktCntBW80Mhz

Number of 80 MHz bandwidth frames sent.

Type: u32

Default: 0
TxPktCntBW80P80Mhz

Number of 80+80 MHz bandwidth frames sent.

Type: u32

Default: 0
TxPktCntGI1600ns

Number of 1600 ns guard interval farmes sent.

Type: u32

Default: 0
TxPktCntGI3200ns

Number of 3200 ns guard interval farmes sent.

Type: u32

Default: 0
TxPktCntGI400ns

Number of 400 ns guard interval farmes sent.

Type: u32

Default: 0
TxPktCntGI800ns

Number of 800 ns guard interval farmes sent.

Type: u32

Default: 0
TxPktCntGINA

Number of not-availlable guard interval farmes sent.

Type: u32

Default: 0
TxPktCntMCS1

Number of MCS1 frames sent.

Type: u32

Default: 0
TxPktCntMCS10

Number of MCS10 frames sent.

Type: u32

Default: 0
TxPktCntMCS11

Number of MCS11 frames sent.

Type: u32

Default: 0
TxPktCntMCS12

Number of MCS12 frames sent.

Type: u32

Default: 0
TxPktCntMCS2

Number of MCS2 frames sent.

Type: u32

Default: 0
TxPktCntMCS3

Number of MCS3 frames sent.

Type: u32

Default: 0
TxPktCntMCS4

Number of MCS4 frames sent.

Type: u32

Default: 0
TxPktCntMCS5

Number of MCS5 frames sent.

Type: u32

Default: 0
TxPktCntMCS6

Number of MCS6 frames sent.

Type: u32

Default: 0
TxPktCntMCS7

Number of MCS7 frames sent.

Type: u32

Default: 0
TxPktCntMCS8

Number of MCS8 frames sent.

Type: u32

Default: 0
TxPktCntMCS9

Number of MCS9 frames sent.

Type: u32

Default: 0
TxPktCntMCSNA

Number of MCS not-available frames sent.

Type: u32

Default: 0
TxPktCntNSS1

Number of NSS1 frames sent.

Type: u32

Default: 0
TxPktCntNSS2

Number of NSS2 frames sent.

Type: u32

Default: 0
TxPktCntNSS3

Number of NSS3 frames sent.

Type: u32

Default: 0
TxPktCntNSS4

Number of NSS4 frames sent.

Type: u32

Default: 0
TxPktCntNSS5

Number of NSS5 frames sent.

Type: u32

Default: 0
TxPktCntNSS6

Number of NSS6 frames sent.

Type: u32

Default: 0
TxPktCntNSS7

Number of NSS7 frames sent.

Type: u32

Default: 0
TxPktCntNSS8

Number of NSS8 frames sent.

Type: u32

Default: 0
TxPktCntRU106

Number of RU106 frames sent.

Type: u32

Default: 0
TxPktCntRU242

Number of RU242 frames sent.

Type: u32

Default: 0
TxPktCntRU26

Number of RU26 frames sent.

Type: u32

Default: 0
TxPktCntRU484

Number of RU484 frames sent.

Type: u32

Default: 0
TxPktCntRU52

Number of RU52 frames sent.

Type: u32

Default: 0
TxPktCntRU996

Number of RU996 frames sent.

Type: u32

Default: 0
TxPPDUType

Physical layer convergence protocol data unit type sent.

Type: enum

Default: PPDU_TYPE_SU

Possible Values:

Value Description
PPDU_TYPE_SU

Single user.
PPDU_TYPE_MU_MIMO

Multi-user multiple-input multiple-output.

PPDU_TYPE_MU_OFDMA

Multi-user orthogonal frequency-division multiple access.

PPDU_TYPE_MU_MIMO_OFDMA

Multiple-input multiple-output orthogonal frequency-division multiple access.
PPDU_TYPE_UL_TRIG

UL-TRIG
PPDU_TYPE_BURST_BCN

BURST-BCN
PPDU_TYPE_UL_BSR_RESP

UL-BSR-RESP
PPDU_TYPE_UL_BSR_TRIG

UL-BSR-TRIG
PPDU_TYPE_UL_RESP

UL-RESP
PPDU_TYPE_UNKNOWN

Unknown
TxRate

Transmitted data rate in bits per second.

Type: u64

Default: 0
TxRetries

Number of sent retries.

Type: u64

Default: 0
TxRuIndex

Transmitted RU assignment index.

Type: u16

Default: 0
TxRuType

Transmitted RU type.

Type: enum

Default: RUTYPE_NA

Possible Values:

Value Description
RUTYPE_NA

No traffic/No OFDMA scheduling
RUTYPE_26_TONE

A 52-Tone RU consists of 24 data subcarriers and 2 pilot subcarriers.
RUTYPE_52_TONE

A 52-Tone RU consists of 48 data subcarriers and 4 pilot subcarriers.
RUTYPE_106_TONE

A 106-tone RU consists of 102 data subcarriers and 4 pilot subcarriers.
RUTYPE_242_TONE

A 242-tone RU consists of 234 data subcarriers and 8 pilot subcarriers.
RUTYPE_484_TONE

A 484-tone RU consists of 468 data subcarriers and 16 pilot subcarriers.
RUTYPE_996_TONE

A 996-tone RU consists of 980 data subcarriers and 16 pilot subcarriers.
WmmEnabled

Status of Wireless Multimedia Extensions / Wi-Fi Multimedia flag.

Type: enum

Default: BT_DISABLED

Possible Values:

Value Description
BT_DISABLED

WMM/WME is disabled.

BT_ENABLED

WMM/WME is enabled.