Ieee80211ClientResults Object


Description:

IEEE 802.11 client results.

Parents: Ieee80211ClientConfig

Relations:

Side name
(Type)
Relative Description
ResultParent
(ResultChild)

Ieee80211ClientConfig

Use this to connect a results object to an object.

Ieee80211ClientResults Writable Attributes

There are no writable attributes.

Ieee80211ClientResults Read-Only Attributes

Read-Only Attribute Description
AuthenticationType

Type of authentication used.

Type: u8

Default: 0

BssCollisionCounter

Number of BSS collisions.

Type: u32

Default: 0

BssColorCode

Value of the BSS color code.

Type: u8

Default: 0

Bssid

Basic Service Set Identifier. The device BSSID/MAC address configured in the client profile.

Type: mac

Default: 00-00-00-00-00-01

BtmQueryCount

Use this property to show BTM query count.

Type: u32

Default: 0

BtmRequestCount

Use this property to show BTM request count.

Type: u32

Default: 0

BtmRespAcceptCount

Use this property to show BTM response accept count.

Type: u32

Default: 0

BtmRespDenialCount

Use this property to show BTM response denial count.

Type: u32

Default: 0

ChannelNumber

Number of the channel.

Type: u32

Default: 0

ChannelWidth

Width of the channel in megahertz..

Type: enum

Default: CHANNEL_WIDTH_NA

Possible Values:

Value Description
CHANNEL_WIDTH_NA

Channel width not available.

CHANNEL_WIDTH_20M

Channel width is set to 20 MHz.

CHANNEL_WIDTH_40M

Channel width is set to 30 MHz.

CHANNEL_WIDTH_80M

Channel width is set to 80 MHz.

CHANNEL_WIDTH_80M_80M

Channel width is set to Dual band 80 MHz.

CHANNEL_WIDTH_160M

Channel width is set to 160 MHz.

FreqBand

Frequency band.

Type: enum

Default: FREQ_BAND_NA

Possible Values:

Value Description
FREQ_BAND_NA

Frequency band not available.

FREQ_BAND_2G

Frequencey band is set to 2 GHz.

FREQ_BAND_5G

Frequencey band is set to 5 GHZ.

FREQ_BAND_6G

Frequencey band is set to 6 GHZ.

FtAveDelay

erage fast BSS transition delay, in milliseconds.

Type: u64

Default: 0

FtDelay

Fast BSS transition delay, in milliseconds.

Type: u64

Default: 0

FtFail

mber of failed transitions.

Type: u64

Default: 0

FtMaxDelay

Maximum fast BSS transition delay, in milliseconds.

Type: u64

Default: 0

FtMinDelay

Minimum fast BSS transition delay, in milliseconds.

Type: u64

Default: 0

FtSuccess

Number of successful transitions.

Type: u64

Default: 0

FtType

IEEE 802.11r fast roaming. Default = N/A.

Type: enum

Default: FT_TYPE_NA

Possible Values:

Value Description
FT_TYPE_NA

No Applicable

FT_TYPE_AIR

Over-the-Air

FT_TYPE_DS

Over-the-DistributionSystem

GroupId

Group ID of the Mu-MIMO client, assigned by the access point.

Type: u8

Default: 0

GuardInterval

Guard interval in nanoseconds of received traffic.

Type: enum

Default: 0

Possible Values:

Value Description
GI_NA

N/A

GI_LONG

800 (ns)

GI_SHORT

400 (ns)

GI_DLONG1

1600(ns)

GI_DLONG2

3200 (ns)

MacAddress

MAC address of the client.

Type: mac

Default: 00-00-00-00-00-01

McsType

Tx Modulation and coding scheme.

Type: enum

Default: MCS_TYPE_NA

Possible Values:

Value Description
MCS_TYPE_NA

MCS not available.

MCS_BPSK

MCS is set to binary phase-shift keying.

MCS_QPSK_1_2

MCS is set to quadrature phase-shift keying.

MCS_QPSK_3_4

MCS is set to quadrature phase-shift keying with 3/4 FEC.

MCS_16_QAM_1_2

MCS is set to 16 quadrature amplitued modulation, 1/2 coding rate.

MCS_16_QAM_3_4

MCS is set to 16 quadrature amplitude modulation, 3/4 coding rate.

MCS_64_QAM_2_3

MCS is set to 64 quadrature amplitude modulation, 2/3 coding rate.

MCS_64_QAM_3_4

MCS is set to 64 quadrature amplitude modulation, 3/4 coding rate.

MCS_64_QAM_5_6

MCS is set to 64 quadrature amplitude modulation, 5/6 coding rate.

MCS_256_QAM_3_4

MCS is set to 256 quadrature amplitude modulation, 3/4 coding rate.

MCS_256_QAM_5_6

MCS is set to 256 quadrature amplitude modulation, 5/6 coding rate.

MCS_1024_QAM_3_4

MCS is set to 1024 quadrature amplitude modulation, 3/4 coding rate.

MCS_1024_QAM_5_6

MCS is set to 1024 quadrature amplitude modulation, 5/6 coding rate.

MCS_2048_QAM

MCS is set to 2048 quadrature amplitude modulation.

MCS_4096_QAM

MCS is set to 4096 quadrature amplitude modulation.

MFPStatus

Management Frame Protection Status

Type: enum

Default: 0

Possible Values:

Value Description
BT_DISABLED

Disabled

BT_ENABLED

Enabled

MimoMode

Multiple-in multiple-output antenna mode..

MIMO is a method for multiplying the capacity of a radio link using multiple transmit and receive antennas to exploit multi-path propagation.

Type: enum

Default: MIMO_MODE_NA

Possible Values:

Value Description
MIMO_MODE_NA

MIMO mode not available.

MIMO_1X1

Mode is set to MIMO 1x1.

MIMO_2X2

Mode is set to MIMO 2x2.

MIMO_3X3

Mode is set to MIMO 3x3.

MIMO_4X4

Mode is set to MIMO 4x4.

MIMO_5x5

Mode is set to MIMO 5x5.

MIMO_6x6

Mode is set to MIMO 6x6.

MIMO_7x7

Mode is set to MIMO 7x7.

MIMO_8x8

Mode is set to MIMO 8x8.

NoiseFloor

Noise floor in dBm.

Type: u8

Default: 0

PerChnWidthRxPkts_0

Number of received channel width packets for NSS1.

Type: u64

Default: 0

PerChnWidthRxPkts_1

Number of received channel width packets for NSS2.

Type: u64

Default: 0

PerChnWidthRxPkts_2

Number of received channel width packets for NSS3.

Type: u64

Default: 0

PerChnWidthRxPkts_3

Number of received channel width packets for NSS4.

Type: u64

Default: 0

PerChnWidthTxPkts_0

Number of transmitted channel width packets for NSS1.

Type: u64

Default: 0

PerChnWidthTxPkts_1

Number of transmitted channel width packets for NSS2.

Type: u64

Default: 0

PerChnWidthTxPkts_2

Number of transmitted channel width packets for NSS3.

Type: u64

Default: 0

PerChnWidthTxPkts_3

Number of transmitted channel width packets for NSS4.

Type: u64

Default: 0

PerGIRxPkts1600ns_0

Number of received Guard-Interval packets for NSS1.

Type: u64

Default: 0

PerGIRxPkts1600ns_1

Number of received Guard-Interval packets for NSS2.

Type: u64

Default: 0

PerGIRxPkts1600ns_10

Number of received Guard-Interval packets for NSS11.

Type: u64

Default: 0

PerGIRxPkts1600ns_11

Number of received Guard-Interval packets for NSS12.

Type: u64

Default: 0

PerGIRxPkts1600ns_2

Number of received Guard-Interval packets for NSS3.

Type: u64

Default: 0

PerGIRxPkts1600ns_3

Number of received Guard-Interval packets for NSS4.

Type: u64

Default: 0

PerGIRxPkts1600ns_4

Number of received Guard-Interval packets for NSS5.

Type: u64

Default: 0

PerGIRxPkts1600ns_5

Number of received Guard-Interval packets for NSS6.

Type: u64

Default: 0

PerGIRxPkts1600ns_6

Number of received Guard-Interval packets for NSS7.

Type: u64

Default: 0

PerGIRxPkts1600ns_7

Number of received Guard-Interval packets for NSS8.

Type: u64

Default: 0

PerGIRxPkts1600ns_8

Number of received Guard-Interval packets for NSS9.

Type: u64

Default: 0

PerGIRxPkts1600ns_9

Number of received Guard-Interval packets for NSS10.

Type: u64

Default: 0

PerGIRxPkts3200ns_0

Number of received Guard-Interval packets for NSS1.

Type: u64

Default: 0

PerGIRxPkts3200ns_1

Number of received Guard-Interval packets for NSS2.

Type: u64

Default: 0

PerGIRxPkts3200ns_10

Number of received Guard-Interval packets for NSS11.

Type: u64

Default: 0

PerGIRxPkts3200ns_11

Number of received Guard-Interval packets for NSS12.

Type: u64

Default: 0

PerGIRxPkts3200ns_2

Number of received Guard-Interval packets for NSS3.

Type: u64

Default: 0

PerGIRxPkts3200ns_3

Number of received Guard-Interval packets for NSS4.

Type: u64

Default: 0

PerGIRxPkts3200ns_4

Number of received Guard-Interval packets for NSS5.

Type: u64

Default: 0

PerGIRxPkts3200ns_5

Number of received Guard-Interval packets for NSS6.

Type: u64

Default: 0

PerGIRxPkts3200ns_6

Number of received Guard-Interval packets for NSS7.

Type: u64

Default: 0

PerGIRxPkts3200ns_7

Number of received Guard-Interval packets for NSS8.

Type: u64

Default: 0

PerGIRxPkts3200ns_8

Number of received Guard-Interval packets for NSS9.

Type: u64

Default: 0

PerGIRxPkts3200ns_9

Number of received Guard-Interval packets for NSS10.

Type: u64

Default: 0

PerGIRxPkts400ns_0

Number of received Guard-Interval packets for NSS1.

Type: u64

Default: 0

PerGIRxPkts400ns_1

Number of received Guard-Interval packets for NSS2.

Type: u64

Default: 0

PerGIRxPkts400ns_10

Number of received Guard-Interval packets for NSS11.

Type: u64

Default: 0

PerGIRxPkts400ns_11

Number of received Guard-Interval packets for NSS12.

Type: u64

Default: 0

PerGIRxPkts400ns_2

Number of received Guard-Interval packets for NSS3.

Type: u64

Default: 0

PerGIRxPkts400ns_3

Number of received Guard-Interval packets for NSS4.

Type: u64

Default: 0

PerGIRxPkts400ns_4

Number of received Guard-Interval packets for NSS5.

Type: u64

Default: 0

PerGIRxPkts400ns_5

Number of received Guard-Interval packets for NSS6.

Type: u64

Default: 0

PerGIRxPkts400ns_6

Number of received Guard-Interval packets for NSS7.

Type: u64

Default: 0

PerGIRxPkts400ns_7

Number of received Guard-Interval packets for NSS8.

Type: u64

Default: 0

PerGIRxPkts400ns_8

Number of received Guard-Interval packets for NSS9.

Type: u64

Default: 0

PerGIRxPkts400ns_9

Number of received Guard-Interval packets for NSS10.

Type: u64

Default: 0

PerGIRxPkts800ns_0

Number of received Guard-Interval packets for NSS1.

Type: u64

Default: 0

PerGIRxPkts800ns_1

Number of received Guard-Interval packets for NSS2.

Type: u64

Default: 0

PerGIRxPkts800ns_10

Number of received Guard-Interval packets for NSS11.

Type: u64

Default: 0

PerGIRxPkts800ns_11

Number of received Guard-Interval packets for NSS12.

Type: u64

Default: 0

PerGIRxPkts800ns_2

Number of received Guard-Interval packets for NSS3.

Type: u64

Default: 0

PerGIRxPkts800ns_3

Number of received Guard-Interval packets for NSS4.

Type: u64

Default: 0

PerGIRxPkts800ns_4

Number of received Guard-Interval packets for NSS5.

Type: u64

Default: 0

PerGIRxPkts800ns_5

Number of received Guard-Interval packets for NSS6.

Type: u64

Default: 0

PerGIRxPkts800ns_6

Number of received Guard-Interval packets for NSS7.

Type: u64

Default: 0

PerGIRxPkts800ns_7

Number of received Guard-Interval packets for NSS8.

Type: u64

Default: 0

PerGIRxPkts800ns_8

Number of received Guard-Interval packets for NSS9.

Type: u64

Default: 0

PerGIRxPkts800ns_9

Number of received Guard-Interval packets for NSS10.

Type: u64

Default: 0

PerGITxPkts1600ns

Number of received 1600ns Guard-Interval packets.

Type: u64

Default: 0

PerGITxPkts3200ns

Number of received 3200ns Guard-Interval packets.

Type: u64

Default: 0

PerGITxPkts400ns

Number of received 400ns Guard-Interval packets.

Type: u64

Default: 0

PerGITxPkts800ns

Number of received 800ns Guard-Interval packets.

Type: u64

Default: 0

PerMcsRxMuPkts_0

Number of received MCS Multi-User packets for NSS1.

Type: u64

Default: 0

PerMcsRxMuPkts_1

Number of received MCS Multi-User packets for NSS2.

Type: u64

Default: 0

PerMcsRxMuPkts_10

Number of received MCS Multi-User packets for NSS11.

Type: u64

Default: 0

PerMcsRxMuPkts_11

Number of received MCS Multi-User packets for NSS12.

Type: u64

Default: 0

PerMcsRxMuPkts_2

Number of received MCS Multi-User packets for NSS3.

Type: u64

Default: 0

PerMcsRxMuPkts_3

Number of received MCS Multi-User packets for NSS4.

Type: u64

Default: 0

PerMcsRxMuPkts_4

Number of received MCS Multi-User packets for NSS5.

Type: u64

Default: 0

PerMcsRxMuPkts_5

Number of received MCS Multi-User packets for NSS6.

Type: u64

Default: 0

PerMcsRxMuPkts_6

Number of received MCS Multi-User packets for NSS7.

Type: u64

Default: 0

PerMcsRxMuPkts_7

Number of received MCS Multi-User packets for NSS8.

Type: u64

Default: 0

PerMcsRxMuPkts_8

Number of received MCS Multi-User packets for NSS9.

Type: u64

Default: 0

PerMcsRxMuPkts_9

Number of received MCS Multi-User packets for NSS10.

Type: u64

Default: 0

PerMcsRxPkts_0

Number of received MCS Type packets for NSS1.

Type: u64

Default: 0

PerMcsRxPkts_1

Number of received MCS Type packets for NSS2.

Type: u64

Default: 0

PerMcsRxPkts_10

Number of received MCS Type packets for NSS11.

Type: u64

Default: 0

PerMcsRxPkts_11

Number of received MCS Type packets for NSS12.

Type: u64

Default: 0

PerMcsRxPkts_2

Number of received MCS Type packets for NSS3.

Type: u64

Default: 0

PerMcsRxPkts_3

Number of received MCS Type packets for NSS4.

Type: u64

Default: 0

PerMcsRxPkts_4

Number of received MCS Type packets for NSS5.

Type: u64

Default: 0

PerMcsRxPkts_5

Number of received MCS Type packets for NSS6.

Type: u64

Default: 0

PerMcsRxPkts_6

Number of received MCS Type packets for NSS7.

Type: u64

Default: 0

PerMcsRxPkts_7

Number of received MCS Type packets for NSS8.

Type: u64

Default: 0

PerMcsRxPkts_8

Number of received MCS Type packets for NSS9.

Type: u64

Default: 0

PerMcsRxPkts_9

Number of received MCS Type packets for NSS10.

Type: u64

Default: 0

PerMcsRxSuPkts_0

Number of received MCS Single-User packets for NSS1.

Type: u64

Default: 0

PerMcsRxSuPkts_1

Number of received MCS Single-User packets for NSS2.

Type: u64

Default: 0

PerMcsRxSuPkts_10

Number of received MCS Single-User packets for NSS11.

Type: u64

Default: 0

PerMcsRxSuPkts_11

Number of received MCS Single-User packets for NSS12.

Type: u64

Default: 0

PerMcsRxSuPkts_2

Number of received MCS Single-User packets for NSS3.

Type: u64

Default: 0

PerMcsRxSuPkts_3

Number of received MCS Single-User packets for NSS4.

Type: u64

Default: 0

PerMcsRxSuPkts_4

Number of received MCS Single-User packets for NSS5.

Type: u64

Default: 0

PerMcsRxSuPkts_5

Number of received MCS Single-User packets for NSS6.

Type: u64

Default: 0

PerMcsRxSuPkts_6

Number of received MCS Single-User packets for NSS7.

Type: u64

Default: 0

PerMcsRxSuPkts_7

Number of received MCS Single-User packets for NSS8.

Type: u64

Default: 0

PerMcsRxSuPkts_8

Number of received MCS Single-User packets for NSS9.

Type: u64

Default: 0

PerMcsRxSuPkts_9

Number of received MCS Single-User packets for NSS10.

Type: u64

Default: 0

PerMcsTxMuPkts_0

Number of transmitted MCS Multi-User packets for NSS1.

Type: u64

Default: 0

PerMcsTxMuPkts_1

Number of transmitted MCS Multi-User packets for NSS2.

Type: u64

Default: 0

PerMcsTxMuPkts_10

Number of transmitted MCS Multi-User packets for NSS11.

Type: u64

Default: 0

PerMcsTxMuPkts_11

Number of transmitted MCS Multi-User packets for NSS12.

Type: u64

Default: 0

PerMcsTxMuPkts_2

Number of transmitted MCS Multi-User packets for NSS3.

Type: u64

Default: 0

PerMcsTxMuPkts_3

Number of transmitted MCS Multi-User packets for NSS4.

Type: u64

Default: 0

PerMcsTxMuPkts_4

Number of transmitted MCS Multi-User packets for NSS5.

Type: u64

Default: 0

PerMcsTxMuPkts_5

Number of transmitted MCS Multi-User packets for NSS6.

Type: u64

Default: 0

PerMcsTxMuPkts_6

Number of transmitted MCS Multi-User packets for NSS7.

Type: u64

Default: 0

PerMcsTxMuPkts_7

Number of transmitted MCS Multi-User packets for NSS8.

Type: u64

Default: 0

PerMcsTxMuPkts_8

Number of transmitted MCS Multi-User packets for NSS9.

Type: u64

Default: 0

PerMcsTxMuPkts_9

Number of transmitted MCS Multi-User packets for NSS10.

Type: u64

Default: 0

PerMcsTxPkts_0

Number of transmitted MCS Type packets for NSS1.

Type: u64

Default: 0

PerMcsTxPkts_1

Number of transmitted MCS Type packets for NSS2.

Type: u64

Default: 0

PerMcsTxPkts_10

Number of transmitted MCS Type packets for NSS11.

Type: u64

Default: 0

PerMcsTxPkts_11

Number of transmitted MCS Type packets for NSS12.

Type: u64

Default: 0

PerMcsTxPkts_2

Number of transmitted MCS Type packets for NSS3.

Type: u64

Default: 0

PerMcsTxPkts_3

Number of transmitted MCS Type packets for NSS4.

Type: u64

Default: 0

PerMcsTxPkts_4

Number of transmitted MCS Type packets for NSS5.

Type: u64

Default: 0

PerMcsTxPkts_5

Number of transmitted MCS Type packets for NSS6.

Type: u64

Default: 0

PerMcsTxPkts_6

Number of transmitted MCS Type packets for NSS7.

Type: u64

Default: 0

PerMcsTxPkts_7

Number of transmitted MCS Type packets for NSS8.

Type: u64

Default: 0

PerMcsTxPkts_8

Number of transmitted MCS Type packets for NSS9.

Type: u64

Default: 0

PerMcsTxPkts_9

Number of transmitted MCS Type packets for NSS10.

Type: u64

Default: 0

PerMcsTxSuPkts_0

Number of transmitted MCS Single-User packets for NSS1.

Type: u64

Default: 0

PerMcsTxSuPkts_1

Number of transmitted MCS Single-User packets for NSS2.

Type: u64

Default: 0

PerMcsTxSuPkts_10

Number of transmitted MCS Single-User packets for NSS11.

Type: u64

Default: 0

PerMcsTxSuPkts_11

Number of transmitted MCS Single-User packets for NSS12.

Type: u64

Default: 0

PerMcsTxSuPkts_2

Number of transmitted MCS Single-User packets for NSS3.

Type: u64

Default: 0

PerMcsTxSuPkts_3

Number of transmitted MCS Single-User packets for NSS4.

Type: u64

Default: 0

PerMcsTxSuPkts_4

Number of transmitted MCS Single-User packets for NSS5.

Type: u64

Default: 0

PerMcsTxSuPkts_5

Number of transmitted MCS Single-User packets for NSS6.

Type: u64

Default: 0

PerMcsTxSuPkts_6

Number of transmitted MCS Single-User packets for NSS7.

Type: u64

Default: 0

PerMcsTxSuPkts_7

Number of transmitted MCS Single-User packets for NSS8.

Type: u64

Default: 0

PerMcsTxSuPkts_8

Number of transmitted MCS Single-User packets for NSS9.

Type: u64

Default: 0

PerMcsTxSuPkts_9

Number of transmitted MCS Single-User packets for NSS10.

Type: u64

Default: 0

PerStreamRssiChw160M_0

Received signal strength indicator for NSS1, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw160M_1

Received signal strength indicator for NSS2, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw160M_2

Received signal strength indicator for NSS3, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw160M_3

Received signal strength indicator for NSS4, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw160M_4

Received signal strength indicator for NSS5, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw160M_5

Received signal strength indicator for NSS6, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw160M_6

Received signal strength indicator for NSS7, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw160M_7

Received signal strength indicator for NSS8, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw20M_0

Received signal strength indicator for NSS1, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw20M_1

Received signal strength indicator for NSS2, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw20M_2

Received signal strength indicator for NSS3, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw20M_3

Received signal strength indicator for NSS4, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw20M_4

Received signal strength indicator for NSS5, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw20M_5

Received signal strength indicator for NSS6, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw20M_6

Received signal strength indicator for NSS7, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw20M_7

Received signal strength indicator for NSS8, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw40M_0

Received signal strength indicator for NSS1, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw40M_1

Received signal strength indicator for NSS2, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw40M_2

Received signal strength indicator for NSS3, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw40M_3

Received signal strength indicator for NSS4, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw40M_4

Received signal strength indicator for NSS5, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw40M_5

Received signal strength indicator for NSS6, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw40M_6

Received signal strength indicator for NSS7, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw40M_7

Received signal strength indicator for NSS8, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw80M_0

Received signal strength indicator for NSS1, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw80M_1

Received signal strength indicator for NSS2, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw80M_2

Received signal strength indicator for NSS3, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw80M_3

Received signal strength indicator for NSS4, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw80M_4

Received signal strength indicator for NSS5, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw80M_5

Received signal strength indicator for NSS6, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw80M_6

Received signal strength indicator for NSS7, signal value in dBm.

Type: u8

Default: 0

PerStreamRssiChw80M_7

Received signal strength indicator for NSS8, signal value in dBm.

Type: u8

Default: 0

PerStreamRxPkts_0

Number of received packets for NSS1.

Type: u64

Default: 0

PerStreamRxPkts_1

Number of received packets for NSS2.

Type: u64

Default: 0

PerStreamRxPkts_2

Number of received packets for NSS3.

Type: u64

Default: 0

PerStreamRxPkts_3

Number of received packets for NSS4.

Type: u64

Default: 0

PerStreamRxPkts_4

Number of received packets for NSS5.

Type: u64

Default: 0

PerStreamRxPkts_5

Number of received packets for NSS6.

Type: u64

Default: 0

PerStreamRxPkts_6

Number of received packets for NSS7.

Type: u64

Default: 0

PerStreamRxPkts_7

Number of received packets for NSS8.

Type: u64

Default: 0

PerStreamTxPkts_0

Number of transmitted packets for NSS1.

Type: u64

Default: 0

PerStreamTxPkts_1

Number of transmitted packets for NSS2.

Type: u64

Default: 0

PerStreamTxPkts_2

Number of transmitted packets for NSS3.

Type: u64

Default: 0

PerStreamTxPkts_3

Number of transmitted packets for NSS4.

Type: u64

Default: 0

PerStreamTxPkts_4

Number of transmitted packets for NSS5.

Type: u64

Default: 0

PerStreamTxPkts_5

Number of transmitted packets for NSS6.

Type: u64

Default: 0

PerStreamTxPkts_6

Number of transmitted packets for NSS7.

Type: u64

Default: 0

PerStreamTxPkts_7

Number of transmitted packets for NSS8.

Type: u64

Default: 0

ReasonCode

Reports an association error.

Type: enum

Default: ASSOC_SUCCESS

Possible Values:

Value Description
ASSOC_SUCCESS

No errors

ASSOC_FAIL_UNKNOWN

Unknown error

ASSOC_FAIL_NETWORK_NOT_FOUND

Access point not found

ASSOC_FAIL_MAYBE_INCORRECT_PASSWD

Possible invalid password

ASSOC_FAIL_AUTH_FAIL

Authentication failure

ASSOC_FAIL_CONN_FAIL

Connection failed

ASSOC_FAIL_TIMEOUT

Association timer expired

ASSOC_FAIL_FTACT_TIMEOUT

Fast roaming expired

RxBytes

Number of bytes received.

Type: u64

Default: 0

RxGuardInterval

Rx Guard Interval

Type: enum

Default: 0

Possible Values:

Value Description
GI_NA

N/A

GI_LONG

800(ns)

GI_SHORT

400 (ns)

GI_DLONG1

1600 (ns)

GI_DLONG2

3200 (ns)

RxMcsType

Rx Modulation and coding scheme.

Type: enum

Default: MCS_TYPE_NA

Possible Values:

Value Description
MCS_TYPE_NA

MCS not available.

MCS_BPSK

Binary phase-shift keying.

MCS_QPSK_1_2

Quadrature phase-shift keying

MCS_QPSK_3_4

Quadrature phase-shift keying with 3/4 FEC.

MCS_16_QAM_1_2

16 quadrature amplitued modulation, 1/2 coding rate.

MCS_16_QAM_3_4

16 quadrature amplitude modulation, 3/4 coding rate.

MCS_64_QAM_2_3

64 quadrature amplitude modulation, 2/3 coding rate.

MCS_64_QAM_3_4

64 quadrature amplitude modulation, 3/4 coding rate.

MCS_64_QAM_5_6

64 quadrature amplitude modulation, 5/6 coding rate.

MCS_256_QAM_3_4

256 quadrature amplitude modulation, 3/4 coding rate.

MCS_256_QAM_5_6

256 quadrature amplitude modulation, 5/6 coding rate.

MCS_1024_QAM_3_4

1024 quadrature amplitude modulation, 3/4 coding rate.

MCS_1024_QAM_5_6

1024 quadrature amplitude modulation, 5/6 coding rate.

MCS_2048_QAM

MCS is set to 2048 quadrature amplitude modulation.

MCS_4096_QAM

MCS is set to 4096 quadrature amplitude modulation.

RxMuPackets

Number of Rx MU packets received

Type: u64

Default: 0

RxNSS

Received number of spatial streams

Type: u8

Default: 0

RxOFDMAMode

Rx OFDM/OFDMA Mode

Type: u8

Default: 0

RxOFDMAPkts

Number of OFDMA packets received

Type: u64

Default: 0

RxPackets

Number of frames received.

Type: u64

Default: 0

RxPktCntRU106

Number of RU106 packets received

Type: u32

Default: 0

RxPktCntRU242

Number of RU242 packets received

Type: u32

Default: 0

RxPktCntRU26

Number of RU26 packets received

Type: u32

Default: 0

RxPktCntRU484

Number of RU484 packets received

Type: u32

Default: 0

RxPktCntRU52

Number of RU52 packets received

Type: u32

Default: 0

RxPktCntRU996

Number of RU996 packets received

Type: u32

Default: 0

RxPPDUType

Use this property to show Rx PPDU Type.

Type: enum

Default: PPDU_TYPE_SU

Possible Values:

Value Description
PPDU_TYPE_SU

SU

PPDU_TYPE_MU_MIMO

MU-MIMO

PPDU_TYPE_MU_OFDMA

MU-OFDMA

PPDU_TYPE_MU_MIMO_OFDMA

MU-MIMO-OFDMA

PPDU_TYPE_UL_TRIG

UL-TRIG

PPDU_TYPE_BURST_BCN

BURST-BCN

PPDU_TYPE_UL_BSR_RESP

UL-BSR-RESP

PPDU_TYPE_UL_BSR_TRIG

UL-BSR-TRIG

PPDU_TYPE_UL_RESP

UL-RESP

SPIRENT_PPDU_TYPE_MU

MU

PPDU_TYPE_UNKNOWN

Unknown

RxRate

Data rate of received traffic in bits per second.

Type: u64

Default: 0

RxRuHighIndex

Index value of the highest received RU

Type: u8

Default: 0

RxRuIndex

The index of RU Assignment at Rx

Type: s16

Default: 0

RxRuLowIndex

Index value of the lowest received RU

Type: u8

Default: 0

RxRuType

Resource Unit (RU) is a unit in OFDMA terminology used to denote a group of subcarriers (tones) used in both DownLink (DL) and UpLink (UL) transmissions.

Type: enum

Default: RUTYPE_NA

Possible Values:

Value Description
RUTYPE_NA

No traffic/No OFDMA scheduling

RUTYPE_26_TONE

A 52-Tone RU consists of 24 data subcarriers and 2 pilot subcarriers.

RUTYPE_52_TONE

A 52-Tone RU consists of 48 data subcarriers and 4 pilot subcarriers.

RUTYPE_106_TONE

A 106-tone RU consists of 102 data subcarriers and 4 pilot subcarriers.

RUTYPE_242_TONE

A 242-tone RU consists of 234 data subcarriers and 8 pilot subcarriers.

RUTYPE_484_TONE

A 484-tone RU consists of 468 data subcarriers and 16 pilot subcarriers.

RUTYPE_996_TONE

A 996-tone RU consists of 980 data subcarriers and 16 pilot subcarriers.

RUTYPE_2X996_TONE

A 2x996-tone RU consists of two 1960 data subcarriers and 0 pilot subcarriers.

RxSuPackets

Number of Rx SU packets received

Type: u64

Default: 0

SignalStrength

Strength of the signal in dBm.

Type: u8

Default: 0

StartupTime

Number of milliseconds required to start.

Type: u64

Default: 0

StaState

State of the station.

Type: u8

Default: 0

State

Displays the current state of all clients from all device blocks and all ports.

Type: enum

Default: CLIENT_ASSOC_IDLE

Possible Values:

Value Description
CLIENT_ASSOC_IDLE

The client is in IDLE state and is ready for association.

CLIENT_ASSOCIATING

The client has started association but has not reached the final state. (Success or Fail)

CLIENT_DEASSOCIATING

The client has started deassociation and has not reached the idle state.

CLIENT_ASSOCIATED

The client association completed successfully.

CLIENT_AUTH_FAIL

The client authentication process failed.

CLIENT_ASSOC_FAIL

The client association failed.

Sumu

It helps increase the speed at which data passes between two Wi-Fi devices.

Type: enum

Default: SUMU_STATE_SU

Possible Values:

Value Description
SUMU_STATE_SU

Single-User Multiple-Input and Multiple-Output.

SUMU_STATE_MU

Multi-User Multiple-Input and Multiple-Output.

TDLSPeerStatus

Tunneled Direct Link Setup Peer

Type: enum

Default: 0

Possible Values:

Value Description
BT_DISABLED

Disabled

BT_ENABLED

Enabled

TimeInAssociation

Number of milliseconds required for the association process.

Type: u64

Default: 0

TxBytes

Number of bytes sent.

Type: u64

Default: 0

TxMuPackets

Number of Tx MU packets sent

Type: u64

Default: 0

TxNSS

Transmitted number of spatial streams

Type: u8

Default: 0

TxOFDMAMode

Tx OFDM/OFDMA Mode

Type: u8

Default: 0

TxOFDMAPkts

Number of OFDMA packets sent

Type: u64

Default: 0

TxPackets

Number of frames sent.

Type: u64

Default: 0

TxPktCntRU106

Number of RU106 packets sent

Type: u32

Default: 0

TxPktCntRU242

Number of RU242 packets sent

Type: u32

Default: 0

TxPktCntRU26

Number of RU26 packets sent

Type: u32

Default: 0

TxPktCntRU484

Number of RU484 packets sent

Type: u32

Default: 0

TxPktCntRU52

Number of RU52 packets sent

Type: u32

Default: 0

TxPktCntRU996

Number of RU996 packets sent

Type: u32

Default: 0

TxPPDUType

Use this property to show Tx PPDU Type.

Type: enum

Default: PPDU_TYPE_SU

Possible Values:

Value Description
PPDU_TYPE_SU

SU

PPDU_TYPE_MU_MIMO

MU-MIMO

PPDU_TYPE_MU_OFDMA

MU-OFDMA

PPDU_TYPE_MU_MIMO_OFDMA

MU-MIMO-OFDMA

PPDU_TYPE_UL_TRIG

UL-TRIG

PPDU_TYPE_BURST_BCN

BURST-BCN

PPDU_TYPE_UL_BSR_RESP

UL-BSR-RESP

PPDU_TYPE_UL_BSR_TRIG

UL-BSR-TRIG

PPDU_TYPE_UL_RESP

UL-RESP

SPIRENT_PPDU_TYPE_MU

MU

PPDU_TYPE_UNKNOWN

Unknown

TxRate

Data rate of traffic sent in bits per second.

Type: u64

Default: 0

TxRuHighIndex

Index value of the highest transmitted RU

Type: u8

Default: 0

TxRuIndex

The index of RU Assignment at Tx

Type: s16

Default: 0

TxRuLowIndex

Index value of the lowest transmitted RU

Type: u8

Default: 0

TxRuType

Resource Unit (RU) is a unit in OFDMA terminology used to denote a group of subcarriers (tones) used in both DownLink (DL) and UpLink (UL) transmissions.

Type: enum

Default: RUTYPE_NA

Possible Values:

Value Description
RUTYPE_NA

No traffic/No OFDMA scheduling

RUTYPE_26_TONE

A 52-Tone RU consists of 24 data subcarriers and 2 pilot subcarriers.

RUTYPE_52_TONE

A 52-Tone RU consists of 48 data subcarriers and 4 pilot subcarriers.

RUTYPE_106_TONE

A 106-tone RU consists of 102 data subcarriers and 4 pilot subcarriers.

RUTYPE_242_TONE

A 242-tone RU consists of 234 data subcarriers and 8 pilot subcarriers.

RUTYPE_484_TONE

A 484-tone RU consists of 468 data subcarriers and 16 pilot subcarriers.

RUTYPE_996_TONE

A 996-tone RU consists of 980 data subcarriers and 16 pilot subcarriers.

RUTYPE_2X996_TONE

A 2x996-tone RU consists of two 1960 data subcarriers and 0 pilot subcarriers.

TxSuPackets

Number of Tx SU packets sent

Type: u64

Default: 0

WlanMode

The transmitting mode (set in the client profile).

Type: enum

Default: WLAN_MODE_NA

Possible Values:

Value Description
WLAN_MODE_NA

Mode is not available.

WLAN_MODE_A

Mode is set to 802.11a.

WLAN_MODE_B

Mode is set to 802.11b.

WLAN_MODE_G

Mode is set to 802.11c.

WLAN_MODE_N

Mode is set to 802.11n.

WLAN_MODE_AC

Mode is set to 802.11ac.

WLAN_MODE_AX

Mode is set to 802.11ax.

WMMStatus

Wireless Multimedia Status

Type: enum

Default: 0

Possible Values:

Value Description
BT_DISABLED

Disabled

BT_ENABLED

Enabled