Description:
Set or verify IEEE 802.11 MAC and physical layer settings.
Can be used with Command Sequencer: Yes
GUI Command Name: IEEE 802.11: Set/Verify 80211-Mac and Physical Layer Settings
Parents: Sequencer
| Attribute | Description | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Common Writable Attributes | ErrorOnFailure | ||||||||||
| BssColor |
Basic service set color value. Type: u32 Default: 29 Range: 0 - 63 |
||||||||||
| CommandRunningMode |
Specify whether the command sets or verifies settings. Type: enum Default: VERIFY_MODE Possible Values:
|
||||||||||
| DualCarrierModulation |
Enable/disable dual carrier modulation. Type: bool Default: FALSE Possible Values:
|
||||||||||
| DurationBasedRts |
Enable/disable high-efficiency, duration-based request to send. Type: bool Default: FALSE Possible Values:
|
||||||||||
| ExtendedRange |
Enable/disable extended range to use 1024-QAM to increase peak data rates. Type: bool Default: FALSE Possible Values:
|
||||||||||
| FragmentationLevel |
Value of the fragmentation level field. Type: u32 Default: 2 Range: 0 - 3 |
||||||||||
| LongTrainingField |
Set the duration of the long training field. Type: enum Default: LTF_MODE_AUTO Possible Values:
|
||||||||||
| MaxNumberofAMPDU |
Maximum number of protocol frames to form an aggregate MAC protocol data unit. Type: u32 Default: 64 Range: 1 - 64 |
||||||||||
| MaxNumberofAMSDU |
Maximum number of service frames to form an aggregate MAC service data unit. Type: u32 Default: 3 Range: 1 - 31 |
||||||||||
| PortList |
List of ports to configure. Type: handle Default: 0 |
| Read-Only Attribute | Description |
|---|---|
| Common Read-Only Attributes | PassFailState |