Description:
Set or verify port settings.
Can be used with Command Sequencer: Yes
GUI Command Name: IEEE 802.11: Set or Verify Port Settings
Parents: Sequencer
Attribute | Description | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Common Writable Attributes | ErrorOnFailure | ||||||||||||||||||||
AssociationDelayInSeconds |
Delay of the association in seconds. Type: u32 Default: 0 Range: 0 - 4294967295 |
||||||||||||||||||||
AssociationLoadMode |
Transmission mode of the association. Type: enum Default: SEQUENTIAL Possible Values:
|
||||||||||||||||||||
AssociationLoadType |
Load type for the association. Type: enum Default: FIXED Possible Values:
|
||||||||||||||||||||
AssociationTimeout |
Timeout of the assocation. Type: u32 Default: 10 Range: 1 - 4294967295 |
||||||||||||||||||||
CommandRunningMode |
Specify whether to set up or verify settings. Type: enum Default: VERIFY_MODE Possible Values:
|
||||||||||||||||||||
CountryRegion |
Country of operation. Type: enum Default: USA Possible Values:
|
||||||||||||||||||||
EnableAPTrafficPassthrough |
Enable or disable the access point traffic passthrough. This option allows the DUT can reach to cloud through chassis admin interface when Psylocke is simulating AP. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||
EnableRadioPower |
Enable radio power. Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||||
FrequencyBand |
Frequency band to use. Type: enum Default: FREQ_5_0_GHZ Possible Values:
|
||||||||||||||||||||
LineSpeed |
Maximum Line Rate Type: enum Default: SPEED_1G Possible Values:
|
||||||||||||||||||||
MimoType |
Specify the MIMO configuration. Type: enum Default: MIMO_3X3 Possible Values:
|
||||||||||||||||||||
PortList |
The list of ports to process. Type: handle Default: 0 |
||||||||||||||||||||
PowerLevel |
Set power attenuation level in decibels. Type: u32 Default: 0 Range: 0 - 30 |
||||||||||||||||||||
PowerLevelChannel |
Set channel attenuation level in decibels Type: double Default: 31.75 Range: 0.25 - 31.75 |
Read-Only Attribute | Description |
---|---|
Common Read-Only Attributes | PassFailState |