Description:
IEEE 802.1AS clock sync results.
Parents: Ieee8021asClockConfig
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| ResultParent (ResultChild) |
Use this to connect a results object to an object. |
There are no writable attributes.
| Read-Only Attribute | Description | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| AsCapable |
Indicates whether the device is AS capable. Type: enum Default: FALSE Possible Values:
|
||||||||
| AsCapableAcrossDomains |
Indicates whether the device is AS capable across domains. Type: enum Default: FALSE Possible Values:
|
||||||||
| AvgMeanPathDelay |
Average mean propagation delay between two ports. Type: s64 Default: 0 |
||||||||
| AvgOffset |
Average Offset Type: s64 Default: 0 |
||||||||
| AvgOffsetMinusDeviation |
Difference between the average offset and the deviation in nanoseconds. Type: s64 Default: 0 |
||||||||
| AvgOffsetPlusDeviation |
Sum of the average offset and the deviation in nanoseconds. Type: s64 Default: 0 |
||||||||
| CrcStatus |
CRC status for AUTOSAR Time Secure sub tlv Type: enum Default: NA Possible Values:
|
||||||||
| CurrentMeanPathDelay |
Mean propagation delay between two ports. Type: s64 Default: 0 |
||||||||
| CurrentOffset |
Current value of the time difference between a master and a slave as computed by the slave in nanoseconds. Type: s64 Default: 0 |
||||||||
| FollowUpCorrectionField |
Time the follow up message spends in residence in queues. Type: s64 Default: 0 |
||||||||
| FpgaTimeInNanoSeconds |
FPGA Time in nano seconds Type: u64 Default: 0 |
||||||||
| InvalidTimestampCount |
Number of unsychronized timestamps detected. Type: u32 Default: 0 |
||||||||
| LogMinDelayRequestInterval |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Log MinDelay RequestInterval Type: s8 Default: 0 |
||||||||
| LogMinPdelayRequestInterval |
Log MinPdelay RequestInterval Type: s8 Default: 0 |
||||||||
| MaxMeanPathDelay |
Maximum mean propagation delay between two ports. Type: s64 Default: 0 |
||||||||
| MinMeanPathDelay |
Minimum mean propagation delay between two ports. Type: s64 Default: 0 |
||||||||
| NegativeOffsetPeak |
Value of the minimum offset peak in nanoseconds. Type: s64 Default: 0 |
||||||||
| OffsetDeviation |
Distance of the offset from the mean in nanoseconds. Type: s64 Default: 0 |
||||||||
| OffsetStandardDeviation |
Standard deviation from the mean of the offset. Type: s64 Default: 0 |
||||||||
| PdelayRespCorrectionField |
Time the peer delay response message spends in residence in queues. Type: s64 Default: 0 |
||||||||
| PdelayRespFollowUpCorrectionField |
Time the peer delay response follow up message spends in residence in queues. Type: s64 Default: 0 |
||||||||
| PeerMeanPathDelay |
An estimate of the current one-way propagation delay on the link. Type: s64 Default: 0 |
||||||||
| PositiveOffsetPeak |
Value of the maximum offset peak in nanoseconds. Type: s64 Default: 0 |
||||||||
| RateRatio |
Rate Ratio Type: double Default: 0 |
||||||||
| ResidenceTime |
Residence Time Type: s64 Default: 0 |
||||||||
| ReverseSyncTimeError |
Time error calculated using Reverse Sync method Type: s64 Default: 0 |
||||||||
| StepRemoved |
Number of communication paths traversed between the local clock and the grandmaster clock. Type: u64 Default: 0 |
||||||||
| SyncCorrectionField |
Time the sync message spends in residence in queues. Type: s64 Default: 0 |
||||||||
| T1InNanoSeconds |
Time at which Pdelay request message sent Type: u64 Default: 0 |
||||||||
| T1TimeError |
Error between Sync sent time and received time Type: s64 Default: 0 |
||||||||
| T2InNanoSeconds |
Time at which Pdelay request message received Type: u64 Default: 0 |
||||||||
| T3InNanoSeconds |
Time at which Pdelay response message was sent Type: u64 Default: 0 |
||||||||
| T4InNanoSeconds |
Time at which Pdelay response message received Type: u64 Default: 0 |
||||||||
| T4TimeError |
Error between Delay/pDelay request sent time and received time Type: s64 Default: 0 |
||||||||
| TimeOfDay |
Time of day based on the international atomic time. Type: string Default: 01 January 1970 12:00:00.000000000 |
||||||||
| TimeOfDayInNanoSeconds |
Show Time of day in nano seconds Type: u64 Default: 0 |
||||||||
| TimeOfDayInSeconds |
gPTP time of day in seconds Type: u64 Default: 0 |
||||||||
| TimeOfDayInUtc |
Shows Time of day in UTC format Type: string Default: 31 December 1969 23:59:51.999918 |