Description:
ISIS IPv4 route.
Parents: IsisLspConfig
Children: IsisBierLabelBindingTlv, IsisFapmSubTlv, IsisIpCustomSubTlv, IsisIpv4SourceRouterIdSubTlv, IsisPrefixAttributeFlagsSubTlv, IsisPrefixSidLabel, IsisPrefixSidSubTlv
Automatically-created children: Ipv4NetworkBlock, IsisDstPrefix
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| EchoReplyErrorGeneration (EchoReplyErrorFecInfo) |
Relation of MPLS Route Params to IPv4 IS-IS RoutesConfig. |
| Attribute | Description | ||||||
|---|---|---|---|---|---|---|---|
| AdminTag |
Administrative tag. Type: u32 Default: 0 |
||||||
| BfdDiscriminatorStep |
BFD My Discriminator Step Type: u32 Default: 1 Range: 1 - 49151 |
||||||
| BfdMessageFormat |
Bfd Message Format Type: enum Default: BFD_CC Possible Values:
|
||||||
| BfdMyDiscriminator |
Bfd My Discriminator Type: u32 Default: 10 |
||||||
| BfdMyDiscriminatorStep |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. BFD My Discriminator Step Type: u32 Default: null Range: 1 - 49151 |
||||||
| DstIpv4Address |
Destination IPV4 Address Type: ip Default: 127.0.0.1 |
||||||
| EnableBfd |
Enable or disable BFD (Bidirectional Forwarding Detection) for this route Type: bool Default: FALSE Possible Values:
|
||||||
| EnableGenericAssociatedChannel |
Enable GenericAssociated Channel (G-ACh) Type: bool Default: FALSE Possible Values:
|
||||||
| EnableGenericAssociatedLabel |
Enable GenericAssociated Label (GAL) Type: bool Default: FALSE Possible Values:
|
||||||
| EnableIpFlexAlg |
Enable IP Flex Algorithm Type: bool Default: FALSE Possible Values:
|
||||||
| Encapsulation |
Encapsulation type Type: enum Default: UDP Possible Values:
|
||||||
| IpFlexAlg |
IP Flex Algorithm Value Type: u8 Default: 128 Range: 0 - 255 |
||||||
| IpFlexAlgFlags |
IP Flex Algorithm Flags Value Type: u8 Default: 0 |
||||||
| IpFlexAlgMtId |
IP Flex Algorithm MTID Value Type: u16 Default: 0 Range: 0 - 4095 |
||||||
| Metric |
Standard 6-bit ISIS metric. Disabled if metric mode is set to wide. Type: u8 Default: 1 Range: 1 - 63 |
||||||
| MetricType |
Indicates that the route has either an internal or external metric. Only the internal metric can be used to calculate the total cost of the shortest path. (Enabled only if the metric mode is not wide.) Type: enum Default: INTERNAL Possible Values:
|
||||||
| RouteType |
Defines the TLV type. (Enabled only if metric mode is not wide.) Type: enum Default: INTERNAL Possible Values:
|
||||||
| UpDown |
If the up/down bit is set to down (1), it indicates that the route is advertised from Level 2 to Level 1. Type: u8 Default: 0 Range: 0 - 1 |
||||||
| WideMetric |
Wide (4-octet) metric is used for traffic engineering. (Disabled if metric mode is set to narrow.) Type: u32 Default: 1 Range: 0 - 16777215 |
There are no read-only attributes.