Description:
ISIS IPv6 router.
Parents: IsisLspConfig
Children: IsisBierInfoSubTlv, IsisFapmSubTlv, IsisIpv6SourceRouterIdSubTlv, IsisPrefixAttributeFlagsSubTlv, IsisPrefixSidSubTlv, IsisSrv6PrefixSidSubTlv
Automatically-created children: Ipv6NetworkBlock
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
EchoReplyErrorGeneration (EchoReplyErrorFecInfo) |
Relation of MPLS Route Params to IPv6 IS-IS RoutesConfig. |
Attribute | Description | ||||||
---|---|---|---|---|---|---|---|
BfdDiscriminatorStep |
BFD My Discriminator Step Type: u32 Default: 1 Range: 1 - 49151 |
||||||
BfdMessageFormat |
Bfd Message Format Type: enum Default: BFD_CC Possible Values:
|
||||||
BfdMyDiscriminator |
Bfd My Discriminator Type: u32 Default: 10 |
||||||
BfdMyDiscriminatorStep |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. BFD My Discriminator Step Type: u32 Default: null Range: 1 - 49151 |
||||||
DstIpv4Address |
Destination IPV4 Address Type: ip Default: 127.0.0.1 |
||||||
EnableBfd |
Enable or disable BFD (Bidirectional Forwarding Detection) for this route Type: bool Default: FALSE Possible Values:
|
||||||
EnableGenericAssociatedChannel |
Enable GenericAssociated Channel (G-ACh) Type: bool Default: FALSE Possible Values:
|
||||||
EnableGenericAssociatedLabel |
Enable GenericAssociated Label (GAL) Type: bool Default: FALSE Possible Values:
|
||||||
EnableIpFlexAlg |
Enable IP Flex Algorithm Type: bool Default: FALSE Possible Values:
|
||||||
Encapsulation |
Encapsulation Type Type: enum Default: UDP Possible Values:
|
||||||
IpFlexAlg |
IP Flex Algorithm Value Type: u8 Default: 128 Range: 0 - 255 |
||||||
IpFlexAlgFlags |
IP Flex Algorithm Flags Value Type: u8 Default: 0 |
||||||
IpFlexAlgMtId |
IP Flex Algorithm MTID Value Type: u16 Default: 2 Range: 0 - 4095 |
||||||
RouteType |
Defines the TLV type. (Enabled only if metric mode is not wide.) Type: enum Default: INTERNAL Possible Values:
|
||||||
UpDown |
If the up/down bit is set to down (1), it indicates that the route is advertised from Level 2 to Level 1. Type: u8 Default: 0 Range: 0 - 1 |
||||||
WideMetric |
Wide (4-octet) metric is used for traffic engineering. (Disabled if metric mode is set to narrow.) Type: u32 Default: 1 Range: 0 - 16777215 |
There are no read-only attributes.