Description:
ISIS shared session parameters used by wizards.
Automatically-created children: IsisAuthenticationParams
Attribute | Description | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Area1 |
Area address (3- to 14-octet address). Spirent TestCenter supports up to three addresses per emulated router. Area 1 address is mandatory. Type: string Default: 000001 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Area2 |
Optional 3- to 14-octet address. Area #1 must be present before area #2 can be configured. Type: string Default: "" (empty string) |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Area3 |
Optional 3- to 14-octet address. Area #1 and #2 must be present before area #3 can be configured. Type: string Default: "" (empty string) |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CircuitId |
1-octet Hex identifier of the emulated router interface. (Applies to non-Ethernet connections only. This field is blank and disabled for Ethernet ports.) Type: u8 Default: 1 Range: 0 - 255 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DutSystemId |
DUT system ID to create the neighbour for emulated LSP Type: mac Default: 00:00:00:00:00:01 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EnableBfd |
Enable or disable BFD (Bidirectional Forwarding Detection) for this router. You must also create a BfdRouterConfig object under the parent Router object. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EnableGracefulRestart |
Specifies if ISIS graceful restart is enabled. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EnableIsisSrSid |
Enable ISIS SR SID TLV Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EndpointBehavior |
Endpoint Behavior Type: enum Default: ENDWPSP Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HelloPadding |
Insert hello padding in hello packets. Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
L1Metric |
Metric of the emulated router interface. It is advertised in L1 IS neighbors TLV and is used for Level 1 traffic. Available when router level is 1. Blank and disabled if level setting is L2 or metric mode setting is wide. Type: u8 Default: 1 Range: 1 - 63 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
L1WideMetric |
3-octet traffic engineering metric of a link from the emulated router to the SUT. It is advertised in the extended IS reachability TLV of the L1 LSP originated by the emulated router. Available when router level is 1. Blank and disabled if level setting is L2 or metric mode setting is narrow. Type: u32 Default: 1 Range: 0 - 16777215 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
L2Metric |
Metric of the emulated router interface. It is advertised in L2 IS neighbors TLV and is used for Level 2 traffic. Available when router level is 2. Disabled if level is L1 or metric mode is wide. Type: u8 Default: 1 Range: 1 - 63 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
L2WideMetric |
3-octet traffic engineering metric of a link from the emulated router to the SUT. It is advertised in the extended IS reachability TLV of the L2 LSP originated by the emulated router. Available when router level is 2. Disabled if level is L1 or metric mode setting is narrow. Type: u32 Default: 1 Range: 0 - 16777215 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Level |
This is the "circuit type" of the emulated router. It defines the type of adjacency that Spirent TestCenter establishes with the SUT. Type: enum Default: LEVEL2 Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MetricMode |
Type, length, and value (TLV) for an LSP. TLVs specify data types, the maximum data length, and the valid data values. One data type that is controlled by the TLV is the default metric of a route. Type: enum Default: NARROW_AND_WIDE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
NetworkType |
Type of ISIS Interface. Type: enum Default: BROADCAST Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
RouterPriority |
On broadcast networks, router priority is used to determine which router should act as the designated router. Type: u8 Default: 0 Range: 0 - 127 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SrAlgorithm |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Algorithm Type: enum Default: LINK_MATRIC_BASED_SPF Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SrAlgorithms |
Algorithm Type: string Default: 0 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SrCapSidBase |
SID/Label Base Type: u32 Default: 100 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SrCapSidRange |
SID/Label Range Type: u16 Default: 100 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SrNodeSidIndex |
Node SID Index Type: u32 Default: 0 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SrNodeSidIndexStep |
Node SID Index Step Type: u32 Default: 1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Srv6LocSize |
SRv6 Locator Size Type: u8 Default: 64 Range: 1 - 128 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Srv6LocStart |
SRv6 Locator Start Type: ipv6 Default: aaaa:0:0:a1:: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Srv6LocStep |
SRv6 Locator Step Type: ipv6 Default: 0:0:0:1:: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Srv6SidArgLength |
SRv6 SID Arguments length in bits Type: u8 Default: 8 Range: 0 - 128 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Srv6SidFunLength |
SRv6 SID Function length in bits Type: u8 Default: 16 Range: 0 - 128 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Srv6SidLocBlockLength |
SRv6 SID Locator Block length in bits Type: u8 Default: 32 Range: 1 - 128 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Srv6SidLocNodeLength |
SRv6 SID Locator Node length in bits Type: u8 Default: 32 Range: 1 - 128 |
There are no read-only attributes.