Description:
L2TP Block Results.
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| ResultParent (ResultChild) |
Use this to connect a results object to an object. |
There are no writable attributes.
| Read-Only Attribute | Description |
|---|---|
| AvgSessionSetupTime |
Average session setup time in milliseconds. Type: u32 Default: 0 |
| AvgTunnelSetupTime |
Average tunnel setup time in milliseconds. Type: u32 Default: 0 |
| MaxSessionSetupTime |
Maximum session setup time in milliseconds. Type: u32 Default: 0 |
| MaxTunnelSetupTime |
Maximum tunnel setup time in milliseconds. Type: u32 Default: 0 |
| MinSessionSetupTime |
Minimum session setup time in milliseconds. Type: u32 Default: 0 |
| MinTunnelSetupTime |
Minimum tunnel setup time in milliseconds. Type: u32 Default: 0 |
| RxAckCount |
Rx Ack packets count. Type: u32 Default: 0 |
| RxCallDisconnectNotifyCount |
Number of Call Disconnect Notify packets received. Type: u32 Default: 0 |
| RxCsunCount |
Number of Connect-Speed-Update Notify (CSUN) packets received. Type: u32 Default: 0 |
| RxCsurqCount |
Number of Connect-Speed-Update Request (CSURQ) packets received. Type: u32 Default: 0 |
| RxHelloCount |
Number of Hello packets received. Type: u32 Default: 0 |
| RxIncomingCallConnectCount |
Number of Incoming Call Connect packets received. Type: u32 Default: 0 |
| RxIncomingCallReplyCount |
Number of Incoming Call Reply packets received. Type: u32 Default: 0 |
| RxIncomingCallRequestCount |
Number of Incoming Call Request packets received. Type: u32 Default: 0 |
| RxOutgoingCallConnectCount |
Number of Outgoing Call Connect packets received. Type: u32 Default: 0 |
| RxOutgoingCallReplyCount |
Number of Outgoing Call Reply packets received. Type: u32 Default: 0 |
| RxOutgoingCallRequestCount |
Number of Outgoing Call Request packets received. Type: u32 Default: 0 |
| RxPktCount |
Rx packets count. Type: u32 Default: 0 |
| RxSetLinkInfoCount |
Number of Set-Link-Info (SLI) packets received. Type: u32 Default: 0 |
| RxStartCcConnectCount |
Number of Start-Control-Connection-Connected (SCCCN) packets received. Type: u32 Default: 0 |
| RxStartCcReplyCount |
Number of Start-Control-Connection-Reply (SCCRP) packets received. Type: u32 Default: 0 |
| RxStartCcRequestCount |
Number of Start-Control-Connection-Request (SCCRQ) packets received. Type: u32 Default: 0 |
| RxStopCcNotifyCount |
Number of Stop-Control-Connection-Notification (StopCCN) packets received. Type: u32 Default: 0 |
| RxWanErrorNotifyCount |
Number of WAN-Error-Notify (WEN) packets received. Type: u32 Default: 0 |
| SessionSetupRate |
Number of sessions set up per second. Type: u32 Default: 0 |
| TunnelSetupRate |
Number of tunnels set up per second. Type: u32 Default: 0 |
| TxAckCount |
Tx Ack packets count. Type: u32 Default: 0 |
| TxCallDisconnectNotifyCount |
Number of Call Disconnect Notify packets sent. Type: u32 Default: 0 |
| TxCsunCount |
Number of Connect-Speed-Update Notify (CSUN) packets sent. Type: u32 Default: 0 |
| TxCsurqCount |
Number of Connect-Speed-Update Request (CSURQ) packets transmitted. Type: u32 Default: 0 |
| TxHelloCount |
Number of hello packets sent. Type: u32 Default: 0 |
| TxIncomingCallConnectCount |
Number of Incoming Call Connect packets sent. Type: u32 Default: 0 |
| TxIncomingCallReplyCount |
Number of Incoming Call Reply packets sent. Type: u32 Default: 0 |
| TxIncomingCallRequestCount |
Number of Incoming Call Request packets sent. Type: u32 Default: 0 |
| TxOutgoingCallConnectCount |
Number of Outgoing Call Connect packets sent. Type: u32 Default: 0 |
| TxOutgoingCallReplyCount |
Number of Outgoing Call Reply packets sent. Type: u32 Default: 0 |
| TxOutgoingCallRequestCount |
Number of Outgoing Call Request packets sent. Type: u32 Default: 0 |
| TxPktCount |
Tx packets count. Type: u32 Default: 0 |
| TxSetLinkInfoCount |
Number of Set-Link-Info (SLI) packets transmitted. Type: u32 Default: 0 |
| TxStartCcConnectCount |
Number of Start-Control-Connection-Connected (SCCCN) packets transmitted. Type: u32 Default: 0 |
| TxStartCcReplyCount |
Number of Start-Control-Connection-Reply (SCCRP) packets transmitted. Type: u32 Default: 0 |
| TxStartCcRequestCount |
Number of Start-Control-Connection-Request (SCCRQ) packets transmitted. Type: u32 Default: 0 |
| TxStopCcNotifyCount |
Number of Stop-Control-Connection-Notification (StopCCN) packets transmitted. Type: u32 Default: 0 |
| TxWanErrorNotifyCount |
Number of WAN-Error-Notify (WEN) packets transmitted. Type: u32 Default: 0 |