Description:
L2TPv3 session results object.
Parents: L2tpv3BlockConfig
There are no writable attributes.
| Read-Only Attribute | Description | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ErrorCode |
Error code. Type: u32 Default: 0 |
||||||||||||
| ErrorMsg |
Error message. Type: string Default: 0 |
||||||||||||
| IncomingProxyAuthCount |
Incoming proxy authentication count. Type: u32 Default: 0 |
||||||||||||
| IncomingProxyLcpCount |
Incoming proxy LCP count. Type: u32 Default: 0 |
||||||||||||
| InnerVlanId |
Inner vlan id. Type: u16 Default: 1 |
||||||||||||
| LocalIp |
Local IPv4 address. Type: ip Default: 0.0.0.0 |
||||||||||||
| LocalIpv6 |
Local IPv6 address. Type: ipv6 Default: :: |
||||||||||||
| MacAddr |
Mac address. Type: mac Default: 00-00-00-00-00-00 |
||||||||||||
| NodeIndex |
Index of the node this tunnel is under. Type: u16 Default: 0 |
||||||||||||
| RemoteIp |
Remote IPv4 address. Type: ip Default: 0.0.0.0 |
||||||||||||
| RemoteIpv6 |
Remote IPv6 address. Type: ipv6 Default: :: |
||||||||||||
| RemotePort |
UDP remote port. Type: u16 Default: 0 |
||||||||||||
| RemoteSessionId |
Remote session id. Type: u32 Default: 0 |
||||||||||||
| RemoteTunnelId |
Remote tunnel id. Type: u32 Default: 0 |
||||||||||||
| ResultCode |
Result code. Type: u32 Default: 0 |
||||||||||||
| RxCallDisconnectNotifyCount |
Number of Call-Disconnect-Notify (CDN) packets received. Type: u32 Default: 0 |
||||||||||||
| RxCsunCount |
Number of Connect-Speed-Update Notify (CSUN) packets received. Type: u32 Default: 0 |
||||||||||||
| RxCsurqCount |
Number of Connect-Speed-Update Request (CSURQ) packets received. Type: u32 Default: 0 |
||||||||||||
| RxIncomingCallConnectCount |
Number of Incoming-Call-Connected (ICCN) packets received. Type: u32 Default: 0 |
||||||||||||
| RxIncomingCallReplyCount |
Number of Incoming-Call-Reply (ICRP) packets received. Type: u32 Default: 0 |
||||||||||||
| RxIncomingCallRequestCount |
Number of Incoming-Call-Request (ICRQ) packets received. Type: u32 Default: 0 |
||||||||||||
| RxOutgoingCallConnectCount |
Number of Outgoing-Call-Connected (OCCN) packets received. Type: u32 Default: 0 |
||||||||||||
| RxOutgoingCallReplyCount |
Number of Outgoing-Call-Reply (OCRP) packets received. Type: u32 Default: 0 |
||||||||||||
| RxOutgoingCallRequestCount |
Number of Outgoing-Call-Request (OCRQ) packets received. Type: u32 Default: 0 |
||||||||||||
| SessionId |
Session id. Type: u32 Default: 0 |
||||||||||||
| SessionIndex |
Session index. Type: u32 Default: 0 |
||||||||||||
| SessionState |
Session state. Type: enum Default: IDLE Possible Values:
|
||||||||||||
| SrcPort |
UDP source port. Type: u16 Default: 1701 |
||||||||||||
| TunnelId |
Tunnel id. Type: u32 Default: 0 |
||||||||||||
| TunnelIndex |
Tunnel index. Type: u32 Default: 0 |
||||||||||||
| TxCallDisconnectNotifyCount |
Number of Call-Disconnect-Notify (CDN) packets transmitted. Type: u32 Default: 0 |
||||||||||||
| TxCsunCount |
Number of Connect-Speed-Update Notify (CSUN) packets sent. Type: u32 Default: 0 |
||||||||||||
| TxCsurqCount |
Number of Connect-Speed-Update Request (CSURQ) packets transmitted. Type: u32 Default: 0 |
||||||||||||
| TxIncomingCallConnectCount |
Number of Incoming-Call-Connected (ICCN) packets transmitted. Type: u32 Default: 0 |
||||||||||||
| TxIncomingCallReplyCount |
Number of Incoming-Call-Reply (ICRP) packets transmitted. Type: u32 Default: 0 |
||||||||||||
| TxIncomingCallRequestCount |
Number of Incoming-Call-Request (ICRQ) packets transmitted. Type: u32 Default: 0 |
||||||||||||
| TxOutgoingCallConnectCount |
Number of Outgoing-Call-Connected (OCCN) packets transmitted. Type: u32 Default: 0 |
||||||||||||
| TxOutgoingCallReplyCount |
Number of Outgoing-Call-Reply (OCRP) packets transmitted. Type: u32 Default: 0 |
||||||||||||
| TxOutgoingCallRequestCount |
Number of Outgoing-Call-Request (OCRQ) packets transmitted. Type: u32 Default: 0 |
||||||||||||
| Vci |
VCI. Type: u16 Default: 32 |
||||||||||||
| VlanId |
Vlan id. Type: u16 Default: 1 |
||||||||||||
| Vpi |
VPI. Type: u16 Default: 0 |