Description:
Create an MPLS interface with BGP VPLS MPLS binding information.
Can be used with Command Sequencer: No
Parents: Sequencer
| Attribute | Description |
|---|---|
| CreateClassId |
Not used. Type: classId Default: 0 |
| CreateCount |
Not used. Type: u32 Default: 1 |
| FarEndVeId |
Far end VPLS edge (VE) ID. Type: u16 Default: 0 |
| FarEndVeIdStep |
Far end VPLS edge (VE) ID step size. Type: u16 Default: 1 |
| LabelRepeatCount |
Label repeat count. Type: u16 Default: 0 |
| NearEndVeId |
Near end VPLS edge (VE) ID. Type: u16 Default: 0 |
| NearEndVeIdStep |
Near end VPLS edge (VE) ID step size. Type: u16 Default: 1 |
| ParentList |
Not used. Type: handle Default: 0 |
| Protocol |
Protocol which resolved the MPLS labels. Type: handle Default: 0 |
| RouteDistinguisher |
Route distinguisher. Type: string Default: 100:1 |
| RouteDistinguisherStep |
Route distinguisher step size. Type: string Default: 0:1 |
| RouteTarget |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Route target. Type: string Default: 100:1 |
| VplsBlockCount |
VPLS block size. Type: u32 Default: 1 |
| Read-Only Attribute | Description |
|---|---|
| ReturnList |
Handle of created MPLS interface. Type: handle Default: 0 |