Description:
PCEP device block results.
Parents: PcepProtocolConfig
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| ResultParent (ResultChild) |
Use this to connect a results object to an object. |
There are no writable attributes.
| Read-Only Attribute | Description |
|---|---|
| ActiveStateLspCount |
Number of LSPs in the Active state. Type: u32 Default: 0 |
| DownStateLspCount |
Number of LSPs in the Down state. Type: u32 Default: 0 |
| FlapCount |
Number of flap events on this PCC block. Type: u32 Default: 0 |
| GoingDownStateLspCount |
Number of LSPs in the Going-Down state. Type: u32 Default: 0 |
| GoingUpStateLspCount |
Number of LSPs in the Going-Up state. Type: u32 Default: 0 |
| OtherStateLspCount |
Number of LSPs in other states. Type: u32 Default: 0 |
| RxCloseCount |
Number of Close messages received. Type: u32 Default: 0 |
| RxErrorCount |
Number of Error messages received. Type: u32 Default: 0 |
| RxKeepAliveCount |
Number of Keepalive messages received. Type: u32 Default: 0 |
| RxNotifyCount |
Number of Notification messages received. Type: u32 Default: 0 |
| RxOpenCount |
Number of Open messages received. Type: u32 Default: 0 |
| RxPCInitCount |
Number of PC Initiated LSP messages received. Type: u32 Default: 0 |
| RxPCRepCount |
Number of PC Reply messages received. Type: u32 Default: 0 |
| RxPCReqCount |
Number of PC Request messages received. Type: u32 Default: 0 |
| RxPCRptCount |
Number of PC Report messages received. Type: u32 Default: 0 |
| RxPCUpdCount |
Number of PC Update messages received. Type: u32 Default: 0 |
| SessionCount |
Number of sessions in the block. Type: u32 Default: 0 |
| SessionIdleCount |
Number of Idle sessions in the block. Type: u32 Default: 0 |
| SessionPendingCount |
Number of Pending sessions in the block. Type: u32 Default: 0 |
| SessionUpCount |
Number of Up sessions in the block. Type: u32 Default: 0 |
| TotalLspCount |
Number of LSPs. Type: u32 Default: 0 |
| TxCloseCount |
Number of Close messages sent. Type: u32 Default: 0 |
| TxErrorCount |
Number of Error messages sent. Type: u32 Default: 0 |
| TxKeepAliveCount |
Number of Keepalive messages sent. Type: u32 Default: 0 |
| TxNotifyCount |
Number of Notification messages sent. Type: u32 Default: 0 |
| TxOpenCount |
Number of Open messages sent. Type: u32 Default: 0 |
| TxPCInitCount |
Number of PC Initiated LSP messages sent. Type: u32 Default: 0 |
| TxPCRepCount |
Number of PC Reply messages sent. Type: u32 Default: 0 |
| TxPCReqCount |
Number of PC Request messages sent. Type: u32 Default: 0 |
| TxPCRptCount |
Number of PC Report messages sent. Type: u32 Default: 0 |
| TxPCUpdCount |
Number of PC Update messages sent. Type: u32 Default: 0 |
| UpStateLspCount |
Number of LSPs in the Up state. Type: u32 Default: 0 |