Description:
To configure PCEP LSP object.
Automatically created from: PccLspConfig, PceLspConfig
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
|
(LspCustomTlv) |
LSP TLV relation. |
| Attribute | Description | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||||||||||||||
| Aflag |
Whether to set administrative flag. Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||
| AutoGenId |
Whether to auto generated the PLSP-ID. The PLSP-ID will be automatically incremented by 1. Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||
| InitLspState |
The initial state of the configured LSP. Type: enum Default: GOINGUP Possible Values:
|
||||||||||||||||||
| Ipv4ExTunnelId |
Starting IPv4 extended tunnel ID. Type: ip Default: 10.0.0.1 |
||||||||||||||||||
| Ipv4ExTunnelIdDeviceOffset |
IPv4 extended tunnel ID device offset. Type: ip Default: 0.0.1.0 |
||||||||||||||||||
| Ipv4ExTunnelIdStep |
IPv4 extended tunnel ID step value. Type: ip Default: 0.0.0.1 |
||||||||||||||||||
| Ipv4TunnelAddr |
Starting IPv4 tunnel address. Type: ip Default: 192.85.1.1 |
||||||||||||||||||
| Ipv4TunnelAddrDeviceOffset |
IPv4 tunnel address device offset. Type: ip Default: 0.0.1.0 |
||||||||||||||||||
| Ipv4TunnelAddrStep |
IPv4 tunnel address step value. Type: ip Default: 0.0.0.1 |
||||||||||||||||||
| Ipv4TunnelEndAddr |
Starting IPv4 tunnel endpoint address. Type: ip Default: 193.85.1.1 |
||||||||||||||||||
| Ipv4TunnelEndAddrDeviceOffset |
IPv4 tunnel endpoint address device offset. Type: ip Default: 0.0.1.0 |
||||||||||||||||||
| Ipv4TunnelEndAddrStep |
IPv4 tunnel endpoint address step value. Type: ip Default: 0.0.0.1 |
||||||||||||||||||
| Ipv6ExTunnelId |
Starting IPv6 extended tunnel ID. Type: ipv6 Default: 2000:1::1 |
||||||||||||||||||
| Ipv6ExTunnelIdDeviceOffset |
IPv6 extended tunnel ID device offset. Type: ipv6 Default: 0::1:0 |
||||||||||||||||||
| Ipv6ExTunnelIdStep |
IPv6 extended tunnel ID step value. Type: ipv6 Default: ::1 |
||||||||||||||||||
| Ipv6TunnelAddr |
Starting IPv6 tunnel address. Type: ipv6 Default: 2000::1 |
||||||||||||||||||
| Ipv6TunnelAddrDeviceOffset |
IPv6 tunnel address device offset. Type: ipv6 Default: 0::1:0 |
||||||||||||||||||
| Ipv6TunnelAddrStep |
IPv6 tunnel address step value. Type: ipv6 Default: ::1 |
||||||||||||||||||
| Ipv6TunnelEndAddr |
Starting IPv6 tunnel endpoint address. Type: ipv6 Default: 2001::1 |
||||||||||||||||||
| Ipv6TunnelEndAddrDeviceOffset |
IPv6 tunnel endpoint address device offset. Type: ipv6 Default: 0::1:0 |
||||||||||||||||||
| Ipv6TunnelEndAddrStep |
IPv6 tunnel endpoint address step value. Type: ipv6 Default: ::1 |
||||||||||||||||||
| LspId |
Starting LSP ID value. Type: u16 Default: 1 |
||||||||||||||||||
| LspIdDeviceOffset |
LSP ID device offset. Type: u16 Default: 1000 |
||||||||||||||||||
| LspIdStep |
LSP ID step value. Type: u16 Default: 1 |
||||||||||||||||||
| LspPflag |
Whether allocate Path Segment/Path Binding by PCE. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||
| P2MPId |
P2MP ID Type: u32 Default: 1 |
||||||||||||||||||
| P2MPIdDeviceOffset |
P2MP ID Device Offset Type: u32 Default: 1000 |
||||||||||||||||||
| P2MPIdStep |
P2MP ID Step Type: u32 Default: 1 |
||||||||||||||||||
| PlspId |
Starting PLSP-ID value. Type: u32 Default: 1 Range: 0 - 1048575 |
||||||||||||||||||
| PlspIdStep |
PLSP-ID step value. Type: u32 Default: 1 |
||||||||||||||||||
| TunnelId |
Starting tunnel ID. Type: u16 Default: 1 |
||||||||||||||||||
| TunnelIdDeviceOffset |
Tunnel ID device offset. Type: u16 Default: 1000 |
||||||||||||||||||
| TunnelIdStep |
Tunnel ID step value. Type: u16 Default: 1 |
There are no read-only attributes.