Rfc2544BackToBackFramesProfile Object

HOME | TECHNOLOGIES | TEST CONFIGURATION | SEQUENCER COMMANDS | GUI COMMAND NAMES | ALL COMMANDS | RESULT | PDU | ALL | OBJECT TREE

Description:

Profile that specifies frame sizes for RFC 2544 ToBackFrames test.

Parents: Rfc2544BackToBackFramesConfig

Automatically-created children: Rfc2544ProfileRate

Relations:

Side name
(Type)		 Relative Description
StreamBlocks
(StreamBlockBinding)

StreamBlock

A link to the streamblocks assigned to the profile.

Rfc2544BackToBackFramesProfile Writable Attributes

Attribute Description
Common Writable Attributes Active, Name
LoadSpecMode

Load mode for this profile.

Type: enum

Default: PER_PORT

Possible Values:

Value Description
PER_PORT

Load specified is the total load per port.
PER_STREAMBLOCK

Load specified is the total load for each stream block.
LoadUnits

Unit of measurement for the load parameter, applied to all ports and streams in the test.

Type: enum

Default: PERCENT_LINE_RATE

Possible Values:

Value Description
PERCENT_LINE_RATE

Percentage of the line rate.
FRAMES_PER_SECOND

Frames per second.
MEGABITS_PER_SECOND

Megabits per second.
KILOBITS_PER_SECOND

Kilobits per second.
BITS_PER_SECOND

Bits per second.
ProfileRateMode

Profile load usage.

Type: enum

Default: PER_TEST

Possible Values:

Value Description
PER_TEST

One load profile for all frame sizes.
PER_FRAME_SIZE

One load profile for each frame size.

Rfc2544BackToBackFramesProfile Read-Only Attributes

There are no read-only attributes.