Description:
Used in the end of test result database. You cannot subscribe to this object to get results.
Parents: Project
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
ResultParent (ResultChild) |
Use this to connect a results object to an object. |
Attribute | Description | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DisplayLoadUnit |
Display units for load in results. Type: enum Default: PERCENT_LINE_RATE Possible Values:
|
Read-Only Attribute | Description | ||||||
---|---|---|---|---|---|---|---|
BurstSize |
Number of test frames sent in one burst in one iteration of the test. Type: u64 Default: 0 |
||||||
ChecksumErrorCount |
Total number of IP/UDP/TCP checksum errors received during the test. Type: u64 Default: 0 |
||||||
ConfiguredFrameSize |
User configured frame size. Type: double Default: 0 |
||||||
DuplicateFrameCount |
Minimum number of duplicate frames received during a test run. This number may not be accurate due to the analyzer mode used for the RFC 2544/2889 tests. Type: u64 Default: 0 |
||||||
ExpectedFrameCount |
Number of expected transmitted frame count. Type: u64 Default: 0 |
||||||
FcsErrorFrameCount |
Total number of frame check sequence errors received during the test. Type: u64 Default: 0 |
||||||
FloodCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Number of flooded frames. Type: u64 Default: 0 |
||||||
FloodedFrameCount |
Total number of test frames flooded to the incorrect egress port during the test. Type: u64 Default: 0 |
||||||
ForwardingRate |
Number of frames per second that a device can be observed to successfully transmit to the correct destination interface in response to a specified offered load. Type: double Default: 0 |
||||||
FrameLengthDistribution |
Name of the iMIX distribution when frame size type is iMIX. Type: string Default: N/A |
||||||
FrameLoss |
Frame loss. Type: u64 Default: 0 |
||||||
FrameRate |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Number of frames transmitted during the last one-second interval. Type: double Default: 0 |
||||||
FrameSize |
Frame size. Type: double Default: 0 |
||||||
FrameSizeType |
Frame size type. Can be Fixed, Random, or iMIX. Type: string Default: 0 |
||||||
IntendedBpsLoad |
Intended load rate in bits per second. Type: double Default: 0 |
||||||
IntendedFPSLoad |
Intended load in frames per second. Type: double Default: 0 |
||||||
IntendedIBGLoad |
Intended load rate in inter burst gaps. Type: double Default: 0 |
||||||
IntendedKbpsLoad |
Intended load rate in kilobits per second. Type: double Default: 0 |
||||||
IntendedLoad |
Number of frames per second that the application attempts to transmit to a DUT/SUT for forwarding to a specified output interface or interfaces. Type: double Default: 0 |
||||||
IntendedMbpsLoad |
Intended load rate in megabits per second. Type: double Default: 0 |
||||||
IntendedPCTLoad |
Intended load rate in percentage. Type: double Default: 0 |
||||||
IterationTotal |
Total number of iterations. Type: u8 Default: 0 |
||||||
LoadSize |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Load size. Type: double Default: 0 |
||||||
LoadSizeType |
Specifies how the traffic load was configured. Can be Fixed or Random. Type: string Default: 0 |
||||||
OfferedBpsLoad |
Offered load rate in bits per second. Type: double Default: 0 |
||||||
OfferedFPSLoad |
Offered load in frames per second. Type: double Default: 0 |
||||||
OfferedIBGLoad |
Offered load in inter burst gaps. Type: double Default: 0 |
||||||
OfferedKbpsLoad |
Offered load rate in Kilobit per second. Type: double Default: 0 |
||||||
OfferedLoad |
Load (in percent or frames per second) offered by the DUT. Type: double Default: 0 |
||||||
OfferedMbpsLoad |
Offered load rate in megabits per second. Type: double Default: 0 |
||||||
OfferedPCTLoad |
Offered load rate in percentage. Type: double Default: 0 |
||||||
OtherFrameCount |
Total number of non-test traffic frames received during the test. Type: u64 Default: 0 |
||||||
Passed |
Whether the iteration passed or failed. Type: bool Default: FALSE Possible Values:
|
||||||
PauseFrameCount |
Total number of pause frames received by the test ports during the test. Type: u64 Default: 0 |
||||||
PercentLoss |
Frame loss percentage. Type: double Default: 0 |
||||||
PfcFrameCount |
Number of PFC frames received. Type: u64 Default: 0 |
||||||
QueuePair |
Queue Pair on RoCEv2 stream Type: double Default: 0 |
||||||
RxExpectedFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Number of expected received frame count. Type: u64 Default: 0 |
||||||
RxFrameCount |
Number of frames received. Type: u64 Default: 0 |
||||||
RxNonSigFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Number of non-signature frames received. Type: u64 Default: 0 |
||||||
RxSigFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Number of Spirent signature frames received. Type: u64 Default: 0 |
||||||
Throughput |
Throughput measured in frames per seconds. Type: double Default: 0 |
||||||
TxFrameCount |
Total number of frames transmitted. Type: u64 Default: 0 |
||||||
TxFrameRate |
Intended frame rate (ILoad) for the test. Type: double Default: 0 |
||||||
TxSigFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Number of Spirent signature frames transmitted. Type: u64 Default: 0 |