Description:
Configuration object for RFC 3918 Scaled Group Forwarding Test.
Parents: Rfc3918Config
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
SequencerRootCommand (BenchmarkingTestCaseRootCommand) |
Sequencer test config. |
Attribute | Description | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||||||||||
CustomGroupCountList |
Custom list of multicast group counts. Type: u32 Default: 0 Range: 1 - 2147483646 |
||||||||||||||
CustomLoadList |
List of user defined load values. Type: double Default: 0 |
||||||||||||||
DistributionType |
How multicast groups are distributed amongst endpoints. Type: enum Default: EVEN Possible Values:
|
||||||||||||||
FixedGroupCount |
Fixed group count size. Type: u32 Default: 100 Range: 1 - 2147483646 |
||||||||||||||
FixedLoad |
Fixed load size. Type: double Default: 10 |
||||||||||||||
GroupCountEnd |
Last group count to use when stepping. Type: u32 Default: 100 Range: 1 - 2147483646 |
||||||||||||||
GroupCountStart |
First group count to use when stepping. Type: u32 Default: 10 Range: 1 - 2147483646 |
||||||||||||||
GroupCountStep |
Group count step to use when stepping. Type: u32 Default: 10 Range: 1 - 2147483646 |
||||||||||||||
GroupCountType |
Method for iterating multicast group counts. Type: enum Default: CUSTOM Possible Values:
|
||||||||||||||
LoadEnd |
When using Step mode for load on the ports, the maximum load for each port. This attribute is ignored if LoadType is set to RANDOM or CUSTOM. Type: double Default: 50 |
||||||||||||||
LoadStart |
When using Step mode for load on the ports, the starting load for each port. This attribute is ignored if LoadType is set to RANDOM or CUSTOM. Type: double Default: 10 |
||||||||||||||
LoadStep |
Step value for incrementing the load for Step mode from LoadStart to LoadEnd. This attribute is ignored if LoadType is set to RANDOM or CUSTOM. Type: double Default: 10 Range: 0.001 - 100000000000.0 |
||||||||||||||
LoadType |
Mode for adjusting the load from iteration to iteration. Type: enum Default: STEP Possible Values:
|
||||||||||||||
LoadUnits |
Unit of measurement for the load parameter, applied to all ports and streams in the test. Type: enum Default: PERCENT_LINE_RATE Possible Values:
|
||||||||||||||
RandomMaxGroupCount |
Upper bound when using random group counts. Type: u32 Default: 1000 Range: 1 - 2147483646 |
||||||||||||||
RandomMaxLoad |
When using random mode for load on the ports, the maximum load for each port. This attribute is ignored if LoadType is set to STEP or CUSTOM. Type: double Default: 50 |
||||||||||||||
RandomMinGroupCount |
Lower bound when using random group counts. Type: u32 Default: 1 Range: 1 - 2147483646 |
||||||||||||||
RandomMinLoad |
When using random mode for load on the ports, the minimum load for each port. This attribute is ignored if LoadType is set to STEP or CUSTOM. Type: double Default: 10 |
There are no read-only attributes.