Description:
Class to get buffer efficiency per iteration results.
Parents: Project
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| ResultParent (ResultChild) |
Use this to connect a results object to an object. |
| Attribute | Description | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DisplayLoadUnit |
Display Load Unit. Type: enum Default: PERCENT_LINE_RATE Possible Values:
|
| Read-Only Attribute | Description |
|---|---|
| AvgJitter |
Average jitter in microseconds. Type: double Default: 0 |
| AvgLatency |
Average latency in microseconds. Type: double Default: 0 |
| BufferSize |
Egress port buffer size. Type: u64 Default: 0 |
| BufferSizeVariationPercentage |
Percentage difference between the buffer size of two consecutive iterations. Type: double Default: 0 |
| BurstSize |
Burst size. Type: u64 Default: 0 |
| ChecksumErrorCount |
Rx Checksum Error Count. Type: u64 Default: 0 |
| ClientVersion |
IGMP/MLD client version when configuration mode is multicast. Type: string Default: 0 |
| ConfiguredFrameSize |
Configured Tx frame size. Type: double Default: 0 |
| Cos |
CoS value. Type: u8 Default: 0 |
| Dscp |
DSCP value. Type: u8 Default: 0 |
| DuplicateFrameCount |
Rx Duplicate Frame Count. Type: u64 Default: 0 |
| EgressPortName |
Name of egress ports. Type: string Default: 0 |
| ExpectedFrameCount |
Expected Frame Count. Type: u64 Default: 0 |
| FcsErrorFrameCount |
Rx FCS Error Frame Count. Type: u64 Default: 0 |
| FloodCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Rx Flooded Frame Count. Type: u64 Default: 0 |
| FloodedFrameCount |
Rx Flooded Frame Count. Type: u64 Default: 0 |
| ForwardingRate |
Forwarding rate in frames per second. Type: double Default: 0 |
| FrameLengthDistribution |
iMIX frame length distribution. Type: string Default: N/A |
| FrameLoss |
Dropped Frame Count. Type: u64 Default: 0 |
| FrameRate |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Tx Frame Rate. Type: double Default: 0 |
| FrameSize |
Average Tx frame size. Type: double Default: 0 |
| FrameSizeType |
Frame size type. Type: string Default: 0 |
| GroupAddress |
Multicast group address. Type: string Default: 0 |
| HistBin10Count |
Histogram bucket 10. Type: u64 Default: 0 |
| HistBin11Count |
Histogram bucket 11. Type: u64 Default: 0 |
| HistBin12Count |
Histogram bucket 12. Type: u64 Default: 0 |
| HistBin13Count |
Histogram bucket 13. Type: u64 Default: 0 |
| HistBin14Count |
Histogram bucket 14. Type: u64 Default: 0 |
| HistBin15Count |
Histogram bucket 15. Type: u64 Default: 0 |
| HistBin16Count |
Histogram bucket 16. Type: u64 Default: 0 |
| HistBin1Count |
Histogram bucket 1. Type: u64 Default: 0 |
| HistBin2Count |
Histogram bucket 2. Type: u64 Default: 0 |
| HistBin3Count |
Histogram bucket 3. Type: u64 Default: 0 |
| HistBin4Count |
Histogram bucket 4. Type: u64 Default: 0 |
| HistBin5Count |
Histogram bucket 5. Type: u64 Default: 0 |
| HistBin6Count |
Histogram bucket 6. Type: u64 Default: 0 |
| HistBin7Count |
Histogram bucket 7. Type: u64 Default: 0 |
| HistBin8Count |
Histogram bucket 8. Type: u64 Default: 0 |
| HistBin9Count |
Histogram bucket 9. Type: u64 Default: 0 |
| IngressPortName |
Name of ingress ports. Type: string Default: 0 |
| IntendedBpsLoad |
Intended load in bits per second. Type: double Default: 0 |
| IntendedFPSLoad |
Intended load in frames per second. Type: double Default: 0 |
| IntendedIBGLoad |
Intended load in inter burst gap. Type: double Default: 0 |
| IntendedKbpsLoad |
Intended load in kilobits per second. Type: double Default: 0 |
| IntendedLoad |
Intended load. Type: double Default: 0 |
| IntendedMbpsLoad |
Intended load in megabits per second. Type: double Default: 0 |
| IntendedPCTLoad |
Intended load in percentage. Type: double Default: 0 |
| Ipv4AvgJitter |
Average jitter in microseconds for IPv4 traffic. Type: double Default: 0 |
| Ipv4AvgLatency |
Average latency in microseconds for IPv4 traffic. Type: double Default: 0 |
| Ipv4FrameLoss |
Number of IPv4 frames lost. Type: u64 Default: 0 |
| Ipv4IntendedBpsLoad |
IPv4 Intended Load rate in bits per second. Type: double Default: 0 |
| Ipv4IntendedFPSLoad |
IPv4 intended load rate in frames per second. Type: double Default: 0 |
| Ipv4IntendedIBGLoad |
IPv4 intended load rate in inter burst gaps. Type: double Default: 0 |
| Ipv4IntendedKbpsLoad |
IPv4 intended load rate in kilobits per second. Type: double Default: 0 |
| Ipv4IntendedLoad |
Intended load for IPv4 traffic. Type: double Default: 0 |
| Ipv4IntendedMbpsLoad |
IPv4 intended load rate in megabits per second. Type: double Default: 0 |
| Ipv4IntendedPCTLoad |
IPv4 intended load rate in percentage. Type: double Default: 0 |
| Ipv4MaxJitter |
Maximum jitter in microseconds for IPv4 traffic. Type: double Default: 0 |
| Ipv4MaxLatency |
Maximum latency in microseconds for IPv4 traffic. Type: double Default: 0 |
| Ipv4MinJitter |
Minimum jitter in microseconds for IPv4 traffic. Type: double Default: 0 |
| Ipv4MinLatency |
Minimum latency in microseconds for IPv4 traffic. Type: double Default: 0 |
| Ipv4OfferedBpsLoad |
IPv4 offered load rate in inter burst gaps. Type: double Default: 0 |
| Ipv4OfferedFPSLoad |
IPv4 offered load rate in frames per second. Type: double Default: 0 |
| Ipv4OfferedIBGLoad |
IPv4 offered load rate in inter burst gaps. Type: double Default: 0 |
| Ipv4OfferedKbpsLoad |
IPv4 offered load rate in kilobits per second. Type: double Default: 0 |
| Ipv4OfferedLoad |
Offered load for IPv4 traffic. Type: double Default: 0 |
| Ipv4OfferedMbpsLoad |
IPv4 offered load rate in megabits per second. Type: double Default: 0 |
| Ipv4OfferedPCTLoad |
IPv4 offered load rate in percentage. Type: double Default: 0 |
| Ipv4RxFrameCount |
Number of IPv4 frames received. Type: u64 Default: 0 |
| Ipv4TxFrameCount |
Number of IPv4 frames transmitted. Type: u64 Default: 0 |
| Ipv4TxFrameRate |
Number of IPv4 frames transmitted per second. Type: double Default: 0 |
| Ipv6AvgJitter |
Average jitter in microseconds for IPv6 traffic. Type: double Default: 0 |
| Ipv6AvgLatency |
Average latency in microseconds for IPv6 traffic. Type: double Default: 0 |
| Ipv6ExtensionHeader |
IPv6 extension header. Type: string Default: N/A |
| Ipv6FrameLoss |
Number of IPv6 frames lost. Type: u64 Default: 0 |
| Ipv6IntendedBpsLoad |
IPv6 intended load rate in bits per second. Type: double Default: 0 |
| Ipv6IntendedFPSLoad |
IPv6 intended load rate in frames per second. Type: double Default: 0 |
| Ipv6IntendedIBGLoad |
IPv6 intended load rate in inter burst gaps. Type: double Default: 0 |
| Ipv6IntendedKbpsLoad |
IPv6 intended load rate in kilobits per second. Type: double Default: 0 |
| Ipv6IntendedLoad |
Intended load for IPv6 traffic. Type: double Default: 0 |
| Ipv6IntendedMbpsLoad |
IPv6 intended load rate in megabits per second. Type: double Default: 0 |
| Ipv6IntendedPCTLoad |
IPv6 intended load rate in percentage. Type: double Default: 0 |
| Ipv6Ipv4CoexistenceRatio |
IPv6-IPv4 coexistence ratio. Type: string Default: N/A |
| Ipv6MaxJitter |
Maximum jitter in microseconds for IPv6 traffic. Type: double Default: 0 |
| Ipv6MaxLatency |
Maximum latency in microseconds for IPv6 traffic. Type: double Default: 0 |
| Ipv6MinJitter |
Minimum jitter in microseconds for IPv6 traffic. Type: double Default: 0 |
| Ipv6MinLatency |
Minimum latency in microseconds for IPv6 traffic. Type: double Default: 0 |
| Ipv6OfferedBpsLoad |
IPv6 offered load rate in bits per second. Type: double Default: 0 |
| Ipv6OfferedFPSLoad |
IPv6 offered load rate in frames per second. Type: double Default: 0 |
| Ipv6OfferedIBGLoad |
IPv6 offered load rate in inter burst gaps. Type: double Default: 0 |
| Ipv6OfferedKbpsLoad |
IPv6 offered load rate in kilobits per second. Type: double Default: 0 |
| Ipv6OfferedLoad |
Offered load for IPv6 traffic. Type: double Default: 0 |
| Ipv6OfferedMbpsLoad |
IPv6 offered load rate in megabits per second. Type: double Default: 0 |
| Ipv6OfferedPCTLoad |
IPv6 offered load rate in percentage. Type: double Default: 0 |
| Ipv6RxFrameCount |
Number of IPv6 frames received. Type: u64 Default: 0 |
| Ipv6TxFrameCount |
Number of IPv6 frames transmitted. Type: u64 Default: 0 |
| Ipv6TxFrameRate |
Number of IPv6 frames transmitted per second. Type: double Default: 0 |
| IterationNum |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Iteration number. Type: u8 Default: 0 |
| IterationNumber |
Iteration number. Type: u32 Default: 0 |
| LoadSize |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Load Size. Type: double Default: 0 |
| LoadSizeType |
Load size type. Type: string Default: 0 |
| MaxJitter |
Maximum jitter in microseconds. Type: double Default: 0 |
| MaxLatency |
Maximum latency in microseconds. Type: double Default: 0 |
| MbpsLineRate |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Tx line rate in Mbps. Type: double Default: 0 |
| MinJitter |
Minimum jitter in microseconds. Type: double Default: 0 |
| MinLatency |
Minimum latency in microseconds. Type: double Default: 0 |
| NumEgressPorts |
Number of egress ports. Type: u32 Default: 0 |
| NumIngressPorts |
Number of ingress ports. Type: u32 Default: 0 |
| OfferedBpsLoad |
Offered load in bits per second. Type: double Default: 0 |
| OfferedFPSLoad |
Offered load frames per second. Type: double Default: 0 |
| OfferedIBGLoad |
Offered load in inter burst gap. Type: double Default: 0 |
| OfferedKbpsLoad |
Offered load in kilobits per second. Type: double Default: 0 |
| OfferedLoad |
Offered load. Type: double Default: 0 |
| OfferedMbpsLoad |
Offered load in megabits per second. Type: double Default: 0 |
| OfferedPCTLoad |
Offered load in percentage. Type: double Default: 0 |
| OtherFrameCount |
Other Received Frame Count. Type: u64 Default: 0 |
| OutOfSeqCount |
Number of frames received out of sequence. Type: u64 Default: 0 |
| OversubscriptionTraffic |
Oversubscription traffic rate. Type: double Default: 0 |
| OversubscriptionTxFrameCount |
Frames transmitted by the port sending oversubscribed traffic. Type: u64 Default: 0 |
| PauseFrameCount |
Rx Pause Frame Count. Type: u64 Default: 0 |
| PercentLoss |
Dropped Frame Percent. Type: double Default: 0 |
| PfcFrameCount |
Rx PFC Frame Count. Type: u64 Default: 0 |
| QueuePair |
Queue Pair on RoCEv2 stream Type: double Default: 0 |
| RxExpectedFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Rx Expected Frame Count. Type: u64 Default: 0 |
| RxFrameCount |
Rx Frame Count. Type: u64 Default: 0 |
| RxNonSigFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Rx Non Signature Frame Count. Type: u64 Default: 0 |
| RxSigFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Rx Signature Frame Count. Type: u64 Default: 0 |
| StreamDroppedFrameCount |
Number of dropped frame count. Type: u64 Default: 0 |
| TrialNum |
Trial number. Type: u8 Default: 0 |
| TxFrameCount |
Tx Frame Count. Type: u64 Default: 0 |
| TxFrameRate |
Tx Frame Rate. Type: double Default: 0 |
| TxMbpsLoad |
Layer 1 Tx rate in Mbps. Type: double Default: 0 |
| TxSigFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Tx Signature Frame Count. Type: u64 Default: 0 |