Description:
Rfc8239 Head Of Line Blocking Test Result.
Parents: Project
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
ResultParent (ResultChild) |
Use this to connect a results object to an object. |
Attribute | Description | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DisplayLoadUnit |
Display Load Unit. Type: enum Default: PERCENT_LINE_RATE Possible Values:
|
Read-Only Attribute | Description | ||||||
---|---|---|---|---|---|---|---|
AvgJitter |
Average Jitter (us). Type: double Default: 0 |
||||||
AvgLatency |
Average Latency (us). Type: double Default: 0 |
||||||
BackPressureExists |
Back Pressure Exists. Type: bool Default: FALSE Possible Values:
|
||||||
BurstSize |
Burst Size. Type: u64 Default: 0 |
||||||
ChecksumErrorCount |
Rx Checksum Error Count. Type: u64 Default: 0 |
||||||
ConfiguredFrameSize |
Configured Tx Frame Size. Type: double Default: 0 |
||||||
CongestedPort |
Congested port. Type: string Default: FALSE |
||||||
CongestedPortFrameLossPercentage |
Frame Loss on Congested port in percent. Type: double Default: 0 |
||||||
DuplicateFrameCount |
Rx Duplicate Frame Count. Type: u64 Default: 0 |
||||||
ExpectedFrameCount |
Expected Frame Count. Type: u64 Default: 0 |
||||||
FcsErrorFrameCount |
Rx FCS Error Frame Count. Type: u64 Default: 0 |
||||||
FloodCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Rx Flooded Frame Count. Type: u64 Default: 0 |
||||||
FloodedFrameCount |
Rx Flooded Frame Count. Type: u64 Default: 0 |
||||||
FrameLengthDistribution |
iMIX Distribution. Type: string Default: N/A |
||||||
FrameLoss |
Dropped Frame Count. Type: u64 Default: 0 |
||||||
FrameRate |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Tx Frame Rate. Type: double Default: 0 |
||||||
FrameSize |
Average Tx Frame Size. Type: double Default: 0 |
||||||
FrameSizeType |
Frame Size Type. Type: string Default: 0 |
||||||
GroupNumber |
Group Number. Type: u32 Default: 0 |
||||||
HistBin10Count |
Histogram Bucket 10. Type: u64 Default: 0 |
||||||
HistBin11Count |
Histogram Bucket 11. Type: u64 Default: 0 |
||||||
HistBin12Count |
Histogram Bucket 12. Type: u64 Default: 0 |
||||||
HistBin13Count |
Histogram Bucket 13. Type: u64 Default: 0 |
||||||
HistBin14Count |
Histogram Bucket 14. Type: u64 Default: 0 |
||||||
HistBin15Count |
Histogram Bucket 15. Type: u64 Default: 0 |
||||||
HistBin16Count |
Histogram Bucket 16. Type: u64 Default: 0 |
||||||
HistBin1Count |
Histogram Bucket 1. Type: u64 Default: 0 |
||||||
HistBin2Count |
Histogram Bucket 2. Type: u64 Default: 0 |
||||||
HistBin3Count |
Histogram Bucket 3. Type: u64 Default: 0 |
||||||
HistBin4Count |
Histogram Bucket 4. Type: u64 Default: 0 |
||||||
HistBin5Count |
Histogram Bucket 5. Type: u64 Default: 0 |
||||||
HistBin6Count |
Histogram Bucket 6. Type: u64 Default: 0 |
||||||
HistBin7Count |
Histogram Bucket 7. Type: u64 Default: 0 |
||||||
HistBin8Count |
Histogram Bucket 8. Type: u64 Default: 0 |
||||||
HistBin9Count |
Histogram Bucket 9. Type: u64 Default: 0 |
||||||
HolbExists |
HOLB Exists. Type: bool Default: FALSE Possible Values:
|
||||||
IntendedBpsLoad |
Intended Load in bps. Type: double Default: 0 |
||||||
IntendedFPSLoad |
Intended Load in Frames Per Second. Type: double Default: 0 |
||||||
IntendedIBGLoad |
Intended Load in Inter Burst gap. Type: double Default: 0 |
||||||
IntendedKbpsLoad |
Intended Load in Kbps. Type: double Default: 0 |
||||||
IntendedLoad |
Intended Load. Type: double Default: 0 |
||||||
IntendedMbpsLoad |
Intended Load in Mbps. Type: double Default: 0 |
||||||
IntendedPCTLoad |
Intended Load in percent. Type: double Default: 0 |
||||||
IterationNumber |
Iteration Number. Type: u32 Default: 0 |
||||||
IterationTotal |
Total Number of Iterations. Type: u8 Default: 0 |
||||||
LoadSize |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Load Size. Type: double Default: 0 |
||||||
LoadSizeType |
Load Size Type. Type: string Default: 0 |
||||||
MaxJitter |
Maximum Jitter (us). Type: double Default: 0 |
||||||
MaxLatency |
Maximum Latency (us). Type: double Default: 0 |
||||||
MinJitter |
Minimum Jitter (us). Type: double Default: 0 |
||||||
MinLatency |
Minimum Latency (us). Type: double Default: 0 |
||||||
OfferedBpsLoad |
Offered Load in bps. Type: double Default: 0 |
||||||
OfferedFPSLoad |
Offered Load in Frames Per Second. Type: double Default: 0 |
||||||
OfferedIBGLoad |
Offered Load in Inter Burst gap. Type: double Default: 0 |
||||||
OfferedKbpsLoad |
Offered Load in Kbps. Type: double Default: 0 |
||||||
OfferedLoad |
Offered Load. Type: double Default: 0 |
||||||
OfferedMbpsLoad |
Offered Load in Mbps. Type: double Default: 0 |
||||||
OfferedPCTLoad |
Offered Load in percent. Type: double Default: 0 |
||||||
OtherFrameCount |
Other Received Frame Count. Type: u64 Default: 0 |
||||||
PauseFrameCount |
Rx Pause Frame Count. Type: u64 Default: 0 |
||||||
PercentLoss |
Dropped Frame Percent. Type: double Default: 0 |
||||||
PfcFrameCount |
Rx PFC Frame Count. Type: u64 Default: 0 |
||||||
QueuePair |
Queue Pair on RoCEv2 stream Type: double Default: 0 |
||||||
RxExpectedFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Rx Expected Frame Count. Type: u64 Default: 0 |
||||||
RxFrameCount |
Rx Frame Count. Type: u64 Default: 0 |
||||||
RxNonSigFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Rx Non Signature Frame Count. Type: u64 Default: 0 |
||||||
RxSigFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Rx Signature Frame Count. Type: u64 Default: 0 |
||||||
TotalFrameLoss |
Total Frame Loss. Type: u64 Default: 0 |
||||||
TxFrameCount |
Tx Frame Count. Type: u64 Default: 0 |
||||||
TxFrameRate |
Tx Frame Rate. Type: double Default: 0 |
||||||
TxPort1 |
Transmit port 1. Type: string Default: FALSE |
||||||
TxPort2 |
Transmit port 2. Type: string Default: FALSE |
||||||
TxSigFrameCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Tx Signature Frame Count. Type: u64 Default: 0 |
||||||
UncongestedPort |
Uncongested port. Type: string Default: FALSE |
||||||
UncongestedPortFrameLossPercentage |
Frame Loss on Uncongested port in percent. Type: double Default: 0 |