Description:
Specifies RoCEv2 Performance wizard Device parameters configuration.
Automatically created from: Rocev2PerfGenRxPortParams, Rocev2PerfGenTxPortParams
| Attribute | Description | ||||||
|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||
| EnableVlan |
Enable VLAN on RoCEv2 server. Type: bool Default: TRUE Possible Values:
|
||||||
| GwIpv4Addr |
Gateway IPv4 address of RoCEv2 server. Type: ip Default: 192.168.100.1 |
||||||
| GwIpv4AddrStep |
Gateway IPv4 address step of RoCEv2 server. Type: ip Default: 0.0.0.1 |
||||||
| IpDscpValue |
DSCP value in IP header Type: u8 Default: 0 Range: 0 - 63 |
||||||
| Ipv4Addr |
IPv4 address of RoCEv2 server. Type: ip Default: 192.168.100.2 |
||||||
| Ipv4AddrStep |
IPv4 address step of RoCEv2 server. Type: ip Default: 0.0.0.1 |
||||||
| MacAddr |
Source MAC address of RoCEv2 server. Type: mac Default: 00:10:94:00:00:01 |
||||||
| MacAddrStep |
Source MAC address step of RoCEv2 server. Type: mac Default: 00:00:00:00:00:01 |
||||||
| QpStepPerServer |
Indicates the queue pair identifier step per server. Type: u16 Default: 1 Range: 1 - 65535 |
||||||
| ServerBlockSize |
Indicates the harddisk block size in kilobits of the RoCEv2 server. Type: u16 Default: 4 Range: 1 - 64 |
||||||
| ServerBlockSizeStep |
Indicates the harddisk block size step in kilobits per RoCEv2 server. Type: u16 Default: 2 Range: 0 - 64 |
||||||
| ServerDeviceCount |
Number of servers required per port Type: u8 Default: 1 Range: 1 - 8 |
||||||
| StartQp |
Indicates the start queue pair identifier. Type: u32 Default: 10000 Range: 0 - 16777215 |
||||||
| StartUdpSrcPort |
Start UDP source port number for RoCEv2 packets. Type: u16 Default: 1024 |
||||||
| StartVlanId |
Start VLAN ID for RoCEv2 packets. Type: u16 Default: 1 Range: 0 - 4095 |
||||||
| UdpSrcPortStep |
Indicates the UDP Source Port step across Queue Pairs. Type: u16 Default: 0 Range: 0 - 32767 |
||||||
| VlanIdStep |
VLAN ID step for RoCEv2 packets. Type: u16 Default: 1 Range: 0 - 4095 |
||||||
| VlanPriority |
VLAN Priority to be set in ethernet header Type: u8 Default: 0 Range: 0 - 7 |
There are no read-only attributes.