Description:
Provides grouped results for all streams under this stream block. Data is subscribed from firmware, grouped by stream block ID.
You do not need to create this object, it is created automatically.
Note: This object is for end of test results. You must use RefreshResultViewCommand before you can access the results.
Parents: StreamBlock
Result children (automatically created): RxStreamResults
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| AssociatedTxResult (AssociatedResult) |
Links Tx and Rx results together so the results can be correlated |
|
| AssociatedRxResult (AssociatedResult) |
Links Tx and Rx results together so the results can be correlated |
|
| ResultParent (ResultChild) |
Use this to connect a results object to an object. |
|
| SummaryResultChild (SummaryResultChild) |
Specifies a child of the summary result. Used to find out which objects are used in the summary. |
There are no writable attributes.
| Read-Only Attribute | Description | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| AvgInterarrivalTime |
Average inter-arrival time measured in 1 microsecond units. Type: double Default: 0 |
||||||||
| AvgJitter |
Average jitter measured in 1 microsecond units. Although jitter value could be negative, only absolute value will be measured. Type: double Default: 0 |
||||||||
| AvgLatency |
Average transfer delay measured in 1 microsecond units. Type: double Default: 0 |
||||||||
| BitCount |
Count of total bits received. Type: u64 Default: 0 |
||||||||
| BitRate |
Rate at which bits are received. Type: u64 Default: 0 |
||||||||
| CellCount |
Count of total cells received. Type: u64 Default: 0 |
||||||||
| CellRate |
Rate at which cells are received. Type: u64 Default: 0 |
||||||||
| Comp16_1 |
Value pulled from the packet by the first 16-bit filter, that is, part of the "Receive Stream ID". Type: u16 Default: 0 |
||||||||
| Comp16_2 |
Value pulled from the packet by the second 16-bit filter, that is, part of the "Receive Stream ID". Type: u16 Default: 0 |
||||||||
| Comp16_3 |
Value pulled from the packet by the third 16-bit filter, that is, part of the "Receive Stream ID". Type: u16 Default: 0 |
||||||||
| Comp16_4 |
Value pulled from the packet by the fourth 16-bit filter, that is, part of the "Receive Stream ID". Type: u16 Default: 0 |
||||||||
| Comp32 |
Value pulled from the packet by the 32-bit filter, that is, part of the "Receive Stream ID". Type: u32 Default: 0 |
||||||||
| CounterTimestamp |
Time when the counter was stored. Type: u64 Default: 0 |
||||||||
| DroppedFrameCount |
Number of frames dropped in transit. Type: u64 Default: 0 |
||||||||
| DroppedFramePercent |
Percentage of dropped frames. Type: double Default: 0 |
||||||||
| DroppedFramePercentRate |
Percent rate of dropped frames. Type: double Default: 0 |
||||||||
| DroppedFrameRate |
Number of frames dropped over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| DuplicateFrameCount |
Number of duplicate frames received. Type: u64 Default: 0 |
||||||||
| DuplicateFrameRate |
Number of duplicate frames received over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| ExpectedSeqNum |
Next expected sequence number in order. Type: u64 Default: 0 |
||||||||
| FcsErrorFrameCount |
Number of FCS error frames received. Type: u64 Default: 0 |
||||||||
| FcsErrorFrameRate |
Number of FCS error frames received over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| FirstArrivalTime |
Backplane first arrival timestamp in 1 microsecond units. 48-bit: groups 6-8, 14-16; 32-bit: other groups. Type: double Default: 0 |
||||||||
| FrameCount |
Number of frames received. Type: u64 Default: 0 |
||||||||
| FrameRate |
Rate at which frames are received. Type: u64 Default: 0 |
||||||||
| HistBin10Count |
Number of frames received in the histogram bucket 10. Type: u64 Default: 0 |
||||||||
| HistBin10Name |
Name of histogram bucket 10. Type: string Default: "" (empty string) |
||||||||
| HistBin10Rate |
Number of frames received in histogram bucket 10 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin11Count |
Number of frames received in the histogram bucket 11. Type: u64 Default: 0 |
||||||||
| HistBin11Name |
Name of histogram bucket 11. Type: string Default: "" (empty string) |
||||||||
| HistBin11Rate |
Number of frames received in histogram bucket 11 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin12Count |
Number of frames received in the histogram bucket 12. Type: u64 Default: 0 |
||||||||
| HistBin12Name |
Name of histogram bucket 12. Type: string Default: "" (empty string) |
||||||||
| HistBin12Rate |
Number of frames received in histogram bucket 12 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin13Count |
Number of frames received in the histogram bucket 13. Type: u64 Default: 0 |
||||||||
| HistBin13Name |
Name of histogram bucket 13. Type: string Default: "" (empty string) |
||||||||
| HistBin13Rate |
Number of frames received in histogram bucket 13 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin14Count |
Number of frames received in the histogram bucket 14. Type: u64 Default: 0 |
||||||||
| HistBin14Name |
Name of histogram bucket 14. Type: string Default: "" (empty string) |
||||||||
| HistBin14Rate |
Number of frames received in histogram bucket 14 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin15Count |
Number of frames received in the histogram bucket 15. Type: u64 Default: 0 |
||||||||
| HistBin15Name |
Name of histogram bucket 15. Type: string Default: "" (empty string) |
||||||||
| HistBin15Rate |
Number of frames received in histogram bucket 15 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin16Count |
Number of frames received in the histogram bucket 16. Type: u64 Default: 0 |
||||||||
| HistBin16Name |
Name of histogram bucket 16. Type: string Default: "" (empty string) |
||||||||
| HistBin16Rate |
Number of frames received in histogram bucket 16 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin1Count |
Number of frames received in the histogram bucket 1. Type: u64 Default: 0 |
||||||||
| HistBin1Name |
Name of histogram bucket 1. Type: string Default: "" (empty string) |
||||||||
| HistBin1Rate |
Number of frames received in histogram bucket 1 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin2Count |
Number of frames received in the histogram bucket 2. Type: u64 Default: 0 |
||||||||
| HistBin2Name |
Name of histogram bucket 2. Type: string Default: "" (empty string) |
||||||||
| HistBin2Rate |
Number of frames received in histogram bucket 2 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin3Count |
Number of frames received in the histogram bucket 3. Type: u64 Default: 0 |
||||||||
| HistBin3Name |
Name of histogram bucket 3. Type: string Default: "" (empty string) |
||||||||
| HistBin3Rate |
Number of frames received in histogram bucket 3 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin4Count |
Number of frames received in the histogram bucket 4. Type: u64 Default: 0 |
||||||||
| HistBin4Name |
Name of histogram bucket 4. Type: string Default: "" (empty string) |
||||||||
| HistBin4Rate |
Number of frames received in histogram bucket 4 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin5Count |
Number of frames received in the histogram bucket 5. Type: u64 Default: 0 |
||||||||
| HistBin5Name |
Name of histogram bucket 5. Type: string Default: "" (empty string) |
||||||||
| HistBin5Rate |
Number of frames received in histogram bucket 5 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin6Count |
Number of frames received in the histogram bucket 6. Type: u64 Default: 0 |
||||||||
| HistBin6Name |
Name of histogram bucket 6. Type: string Default: "" (empty string) |
||||||||
| HistBin6Rate |
Number of frames received in histogram bucket 6 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin7Count |
Number of frames received in the histogram bucket 7. Type: u64 Default: 0 |
||||||||
| HistBin7Name |
Name of histogram bucket 7. Type: string Default: "" (empty string) |
||||||||
| HistBin7Rate |
Number of frames received in histogram bucket 7 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin8Count |
Number of frames received in the histogram bucket 8. Type: u64 Default: 0 |
||||||||
| HistBin8Name |
Name of histogram bucket 8. Type: string Default: "" (empty string) |
||||||||
| HistBin8Rate |
Number of frames received in histogram bucket 8 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| HistBin9Count |
Number of frames received in the histogram bucket 9. Type: u64 Default: 0 |
||||||||
| HistBin9Name |
Name of histogram bucket 9. Type: string Default: "" (empty string) |
||||||||
| HistBin9Rate |
Number of frames received in histogram bucket 9 over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| InOrderFrameCount |
Number of frames received in sequence order. Type: u64 Default: 0 |
||||||||
| InOrderFrameRate |
Number of frames received in order over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| InSeqFrameCount |
Number of frames received in sequence order. Type: u64 Default: 0 |
||||||||
| InSeqFrameRate |
Number of frames received in sequence order over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| Ipv4ChecksumErrorCount |
Number of IPv4 checksum errors received. Type: u64 Default: 0 |
||||||||
| Ipv4ChecksumErrorRate |
Number of IPv4 checksum errors received over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| L1BitCount |
Count of total layer1 bits received. Type: u64 Default: 0 |
||||||||
| L1BitRate |
Rate at which layer1 bits are received. Type: u64 Default: 0 |
||||||||
| LastArrivalTime |
Backplane last arrival timestamp in 1 microsecond units. 48-bit: groups 6-8, 14-16; 32-bit: other groups. Type: double Default: 0 |
||||||||
| LastSeqNum |
Last sequence number received. Type: u64 Default: 0 |
||||||||
| LateFrameCount |
Number of late frames received. Type: u64 Default: 0 |
||||||||
| LateFrameRate |
Number of late frames received over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| MaxFrameLength |
Maximum frame length received (in bytes). Type: u64 Default: 0 |
||||||||
| MaxInterarrivalTime |
Maximum inter-arrival time measured in 1 microsecond units. Type: double Default: 0 |
||||||||
| MaxJitter |
Maximum jitter measured in 1 microsecond units. Although jitter value could be negative, only absolute value will be measured. Type: double Default: 0 |
||||||||
| MaxLatency |
Maximum transfer delay measured in 1 microsecond units. Type: double Default: 0 |
||||||||
| MinFrameLength |
Minimum frame length received (in bytes). Type: u64 Default: 0 |
||||||||
| MinInterarrivalTime |
Minimum inter-arrival time measured in 1 microsecond units. Type: double Default: 0 |
||||||||
| MinJitter |
Minimum jitter measured in 1 microsecond units. Although jitter value could be negative, only absolute value will be measured. Type: double Default: 0 |
||||||||
| MinLatency |
Minimum transfer delay measured in 1 microsecond units. Type: double Default: 0 |
||||||||
| NonRedundancyCount |
Non-Redundancy count Type: u64 Default: 0 |
||||||||
| OctetCount |
Number of bytes received. Type: u64 Default: 0 |
||||||||
| OctetRate |
Rate at which bytes are received. Type: u64 Default: 0 |
||||||||
| OutSeqFrameCount |
Number of frames received out of sequence order. Type: u64 Default: 0 |
||||||||
| OutSeqFrameRate |
Number of frames received out of sequence order over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| PortStrayFrames |
Whether frames received on the port are stray frames (not expected). Type: enum Default: NA Possible Values:
|
||||||||
| PrbsBitErrorCount |
Number of PRBS bit errors received. Type: u64 Default: 0 |
||||||||
| PrbsBitErrorRate |
Number of PRBS bit errors received over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| PrbsBitErrorRatio |
PRBS bit error ratio. Type: double Default: 0 |
||||||||
| PrbsErrorFrameCount |
Count of total PRBS error frames received. Type: u64 Default: 0 |
||||||||
| PrbsErrorFrameRate |
Rate at which PRBS error frames are received. Type: u64 Default: 0 |
||||||||
| PrbsFillOctetCount |
Number of PRBS bytes received. Type: u64 Default: 0 |
||||||||
| PrbsFillOctetRate |
Number of PRBS fill bytes received over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| RedundancyDroppedCount |
Redundancy dropped count Type: u64 Default: 0 |
||||||||
| RedundancyDuplicatedCount |
Redundancy duplicated count Type: u64 Default: 0 |
||||||||
| RedundancyFrameCount |
Redundancy count Type: u64 Default: 0 |
||||||||
| RedundancyFrameRate |
Redundancy rate Type: u64 Default: 0 |
||||||||
| RedundancyInSeqCount |
Redundancy in sequence count Type: u64 Default: 0 |
||||||||
| RedundancyOutSeqCount |
Redundancy out of sequence count Type: u64 Default: 0 |
||||||||
| ReorderedFrameCount |
Number of frames reordered. Type: u64 Default: 0 |
||||||||
| ReorderedFrameRate |
Number of frames reordered over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| Rfc4689AbsoluteAvgJitter |
Avg Jitter value calculated using RFC 4689 specification. Type: double Default: 0 |
||||||||
| RxPort |
Rx port name. Type: string Default: 0 |
||||||||
| SeqRunLength |
Sequence run length is the length of the current sequence run, updated each time a frame is received. A sequence run can contain reordered frames (in which the received sequence number is less than the expected sequence number) but no discontinuities (in which the received sequence number is greater than the expected sequence number). Sequence runs have no missing sequence numbers between start and end values. Type: u64 Default: 0 |
||||||||
| ShortTermAvgInterarrivalTime |
Short term average inter-arrival time measured in 1 microsecond units. Type: double Default: 0 |
||||||||
| ShortTermAvgJitter |
Short term average jitter. Type: double Default: 0 |
||||||||
| ShortTermAvgLatency |
Short term average latency of the transmission. Type: double Default: 0 |
||||||||
| SigFrameCount |
Number of Spirent signature frames received. Type: u64 Default: 0 |
||||||||
| SigFrameRate |
Rate at which Spirent signature frames are received. Type: u64 Default: 0 |
||||||||
| StreamIndex |
Monotonically incrementing index (zero-based) in the order that the streams were learned. Type: u32 Default: 0 |
||||||||
| TcpUdpChecksumErrorCount |
Number of TCP/UDP checksum errors received. Type: u64 Default: 0 |
||||||||
| TcpUdpChecksumErrorRate |
Number of TCP/UDP checksum errors received over the last 1-second interval. Type: u64 Default: 0 |
||||||||
| TotalInterarrivalTime |
Total inter-arrival time measured in 1 microsecond units. Type: double Default: 0 |
||||||||
| TotalJitter |
Total jitter measured in 1 microsecond units. Although jitter value could be negative, only absolute value will be measured. Type: double Default: 0 |
||||||||
| TotalJitterRate |
Total jitter over the last 1-second interval. Type: double Default: 0 |
||||||||
| TotalLatency |
Total transfer delay measured in 1 microsecond units. Type: double Default: 0 |