Description:
SIP UA results.
Parents: SipUaProtocolConfig
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| ResultParent (ResultChild) |
Use this to connect a results object to an object. |
There are no writable attributes.
| Read-Only Attribute | Description |
|---|---|
| AbsMosABelowThresholdProp |
Proportion of packets below the absolute MOS-A threshold. Type: double Default: 0 |
| ActiveCallCount |
Number of active SIP calls. Type: u64 Default: 0 |
| AudioBurstCount |
Number of burst periods where significant packet loss/discard is occurring. Type: u32 Default: 0 |
| AudioBurstLength |
Average length of a packet loss burst in transport packets. Type: u32 Default: 0 |
| AudioBurstLossRate |
Proportion of packets lost (before application of error correction algorithms) during burst periods. Type: double Default: 0 |
| AudioGapCount |
Number of gap periods where no significant packet loss/discard is occurring. Type: u32 Default: 0 |
| AudioGapLength |
Average length of a gap, in transport packets. Type: u32 Default: 0 |
| AudioGapLossRate |
Proportion of packets lost (before application of error correction algorithms) during gap periods. Type: double Default: 0 |
| AudioIntervalTransportPktDiscardedCount |
Number of transport packets discarded during the measurement interval. Type: u32 Default: 0 |
| AudioIntervalTransportPktEffLossRate |
Number of transport packets lost for the measurement interval. Type: double Default: 0 |
| AudioIntervalTransportPktLostCount |
Number of transport packets received for the measurement interval. Type: u32 Default: 0 |
| AudioIntervalTransportPktRcvdCount |
Number of transport packets received for the measurement interval. Type: u32 Default: 0 |
| AudioPktLossDegradSev |
Severity of quality degradation that is attributed to network transport packet loss. Type: u8 Default: 0 |
| AudioPpdv |
Stream transport Packet-to-Packet Delay Variation (RFC3550) in milliseconds. Type: double Default: 0 |
| AudioTransportPktCount |
Number of transport packets received. Type: u32 Default: 0 |
| AudioTransportPktLostCount |
Number of transport packets lost. Type: u32 Default: 0 |
| AudioUncorrLossProp |
Total proportion of stream transport packets lost in the transport network. Type: double Default: 0 |
| AverageDisconnectResponseDelay |
Average time from the BYE transmission to the time the 200 OK response is received. Type: u32 Default: 0 |
| AverageFailedSessionSetupDelay |
Average time from the INVITE transmission to the time a 4xx, 5xx, or 6xx response is received. Type: u32 Default: 0 |
| AverageHopsPerReq |
Average number of hops it took for an INVITE to get from the calling party to the called party. Type: u32 Default: 0 |
| AverageMosCQ |
Average conversational quality mean opinion score. Type: double Default: 0 |
| AveragePostDialDelay |
Average time from the first INVITE transmission to the time the first 1xx response is received. Type: u32 Default: 0 |
| AverageResponseDelay |
Average time from the first INVITE transmission to the time the first 1xx response is received. Type: u32 Default: 0 |
| AverageRFactorCQ |
Average conversational quality R-factor value. Type: u8 Default: 0 |
| AverageRFactorLQ |
Average listening quality R-factor value. Type: u8 Default: 0 |
| AverageRtpPacketsDiscard |
Average number of RTP packets discarded per completed call. Type: u64 Default: 0 |
| AverageRtpPacketsLost |
Average number of RTP packets lost per completed call. Type: u64 Default: 0 |
| AverageSessionAckDelay |
Average time from the 200 OK transmission to the time the ACK response is received. Type: u32 Default: 0 |
| AverageSucSessionDuration |
Average duration of a dialog. Type: u32 Default: 0 |
| AverageUaRegFailedTime |
Minimum time from the REGISTER transmission to the time the 4xx is received, or the second 4xx received if authentication enabled. Type: u32 Default: 0 |
| AverageVoIPPpdv |
Average packet-to-packet delay variation of VoIP packets in milliseconds. Type: double Default: 0 |
| AvgAbsMosA |
Average audio MOS, a 1-5 score that considers the effect of the audio codec, bit rate, sample rate and packet loss on viewing quality. Type: double Default: 0 |
| AvgAbsMosV |
Average video MOS, a 1-5 score that considers the effect of the video codec, frame rate, packet loss distribution, and GoP structure on viewing quality. This is an Absolute MOS for picture quality that considers the impact of image resolution, codec and compression level, the effects of transmission impairments and frame loss concealment, but not the display size. Type: double Default: 0 |
| AvgRelMosV |
Average adjusted MOS-V score that takes into account the frame size and frame rate, indicating picture quality relative to the ideal for a particular medium. (e.g., video viewed on a mobile phone might get an Absolute MOS-V of 3.1, which translates to a Relative MOS-V of 4.4 or close to ideal for that type of service.) Type: double Default: 0 |
| AvgStreamVideoBw |
Average bandwidth, in bits/ second, measured during a one second window, excluding transport packet header overhead and error correction/ retransmission. Type: u32 Default: 0 |
| BlockIndex |
Internally allocated index for SipUaProtocolConfig. Type: u32 Default: 0 |
| CallAttemptCount |
Count for how many UAs will attempt to start call. Type: u64 Default: 0 |
| CallAvgTime |
Average time of all SIP UAs calls. Type: u32 Default: 0 |
| CallFailureCount |
Count for how many UAs started calls unsuccessfully. Type: u64 Default: 0 |
| CallMaxTime |
Maximum time in all SIP UAs calls. Type: u32 Default: 0 |
| CallMinTime |
Maximum time in all SIP UAs calls. Type: u32 Default: 0 |
| CallsAnsweredCount |
Number of calls answered by this UA. Type: u64 Default: 0 |
| CallSuccessCount |
Count for how many UAs started call successfully. Type: u64 Default: 0 |
| CallSuccessPercent |
Percent of SIP UAs calls successfully. Type: double Default: 0 |
| FailedCall5xxCount |
Number of calls initiated that failed due to 5xx-series (server error) errors. Type: u64 Default: 0 |
| FailedCallTimerBCount |
Number of calls that failed because Timer B (transaction timeouts timer) expired. Type: u64 Default: 0 |
| FailedCallTransErrorCount |
Number of calls initiated that failed due to TCP or UDP errors. Type: u64 Default: 0 |
| FailedSessionDisconnectCount |
Number of failures to receive a response to a BYE. Type: u64 Default: 0 |
| IframeInterarrivalJitter |
Average I-frame inter-arrival jitter in milliseconds. The inter-arrival jitter is computed relative to the expected arrival time based on the frame rate. Type: double Default: 0 |
| IntendedCallLoad |
Intended Call Load as computed by IL. The value is in units of the configured Load type in the Load Profile. Type: u32 Default: 0 |
| IntendedRegistrationLoad |
Intended Registration Load as computed by IL. The value is in units of the configured Load type in the Load Profile. Type: u32 Default: 0 |
| IntervalAbsMosA |
Audio MOS, a 1-5 score that considers the effect of the audio codec, bit rate, sample rate and packet loss on viewing quality. Type: double Default: 0 |
| IntervalAbsMosV |
Video MOS for the measurement interval, a 1-5 score that considers the effect of the video codec, frame rate, packet loss distribution, and GoP structure on viewing quality. This is an Absolute MOS for picture quality that considers the impact of image resolution, codec and compression level, the effects of transmission impairments and frame loss concealment, but not the display size. Type: double Default: 0 |
| IntervalRelMosV |
Adjusted MOS-V score for the measurement interval that takes into account the frame size and frame rate, indicating picture quality relative to the ideal for a particular medium. (e.g., video viewed on a mobile phone might get an Absolute MOS-V of 3.1, which translates to a Relative MOS-V of 4.4 or close to ideal for that type of service.) Type: double Default: 0 |
| MaxAbsMosA |
Maximum audio MOS, a 1-5 score that considers the effect of the audio codec, bit rate, sample rate and packet loss on viewing quality. Type: double Default: 0 |
| MaxAbsMosV |
Maximum video MOS, a 1-5 score that considers the effect of the video codec, frame rate, packet loss distribution, and GoP structure on viewing quality. This is an Absolute MOS for picture quality that considers the impact of image resolution, codec and compression level, the effects of transmission impairments and frame loss concealment, but not the display size. Type: double Default: 0 |
| MaxDisconnectResponseDelay |
Maximum time from the BYE transmission to the time the 200 OK response is received. Type: u32 Default: 0 |
| MaxFailedSessionSetupDelay |
Maximum time from the INVITE transmission to the time a 4xx, 5xx, or 6xx response is received. Type: u32 Default: 0 |
| MaxHopsPerReq |
Maximum number of hops it took for an INVITE to get from the calling party to the called party. Type: u32 Default: 0 |
| MaxMosCQ |
Maximum conversational quality mean opinion score. Type: double Default: 0 |
| MaxPostDialDelay |
Maximum time from the first INVITE transmission to the time the 180 response is received. Type: u32 Default: 0 |
| MaxRelMosV |
Maximum adjusted MOS-V score that takes into account the frame size and frame rate, indicating picture quality relative to the ideal for a particular medium. (e.g., video viewed on a mobile phone might get an Absolute MOS-V of 3.1, which translates to a Relative MOS-V of 4.4 or close to ideal for that type of service.) Type: double Default: 0 |
| MaxResponseDelay |
Maximum time from the first INVITE transmission to the time the first 1xx response is received. Type: u32 Default: 0 |
| MaxRFactorCQ |
Maximum conversational quality R-factor value. Type: u8 Default: 0 |
| MaxRFactorLQ |
Maximum listening quality R-factor value. Type: u8 Default: 0 |
| MaxRtpPacketsDiscard |
Maximum number of RTP packets discarded per completed call. Type: u64 Default: 0 |
| MaxRtpPacketsLost |
Maximum number of RTP packets lost per completed call. Type: u64 Default: 0 |
| MaxSessionAckDelay |
Maximum time from the 200 OK transmission to the time the ACK response is received. Type: u32 Default: 0 |
| MaxSucSessionDuration |
Maximum duration of a dialog. Type: u32 Default: 0 |
| MaxUaRegFailedTime |
Maximum time from the REGISTER transmission to the time the 4xx is received, or the second 4xx received if authentication enabled. Type: u32 Default: 0 |
| MaxVoIPPpdv |
Average packet-to-packet delay variation of VoIP packets in milliseconds. Type: double Default: 0 |
| MinAbsMosA |
Minimum audio MOS, a 1-5 score that considers the effect of the audio codec, bit rate, sample rate and packet loss on viewing quality. Type: double Default: 0 |
| MinAbsMosV |
Minimum video MOS, a 1-5 score that considers the effect of the video codec, frame rate, packet loss distribution, and GoP structure on viewing quality. This is an Absolute MOS for picture quality that considers the impact of image resolution, codec and compression level, the effects of transmission impairments and frame loss concealment, but not the display size. Type: double Default: 0 |
| MinDisconnectResponseDelay |
Minimum time from the BYE transmission to the time the 200 OK response is received. Type: u32 Default: 0 |
| MinFailedSessionSetupDelay |
Minimum time from the INVITE transmission to the time a 4xx, 5xx, or 6xx response is received. Type: u32 Default: 0 |
| MinHopsPerReq |
Minimum number of hops it took for an INVITE to get from the calling party to the called party. Type: u32 Default: 0 |
| MinMosCQ |
Minimum conversational quality mean opinion score. Type: double Default: 0 |
| MinPostDialDelay |
Minimum time from the first INVITE transmission to the time the first 1xx response is received. Type: u32 Default: 0 |
| MinRelMosV |
Minimum adjusted MOS-V score that takes into account the frame size and frame rate, indicating picture quality relative to the ideal for a particular medium. (e.g., video viewed on a mobile phone might get an Absolute MOS-V of 3.1, which translates to a Relative MOS-V of 4.4 or close to ideal for that type of service.) Type: double Default: 0 |
| MinResponseDelay |
Minimum time from the first INVITE transmission to the time the first 1xx response is received. Type: u32 Default: 0 |
| MinRFactorCQ |
Minimum conversational quality R-factor value. Type: u8 Default: 0 |
| MinRFactorLQ |
Minimum listening quality R-factor value. Type: u8 Default: 0 |
| MinRtpPacketsDiscard |
Minimum number of RTP packets discarded per completed call. Type: u64 Default: 0 |
| MinRtpPacketsLost |
Minimum number of RTP packets lost per completed call. Type: u64 Default: 0 |
| MinSessionAckDelay |
Minimum time from the 200 OK transmission to the time the ACK response is received. Type: u32 Default: 0 |
| MinSucSessionDuration |
Minimum duration of a dialog. Type: u32 Default: 0 |
| MinUaRegFailedTime |
Minimum number of hops it took for an INVITE to get from the calling party to the called party. Type: u32 Default: 0 |
| MOS |
Mean Opinion Score of the caller side. MOS is calculated using the ITU-T, G.107 E-model. Type: double Default: 0 |
| MosLqAvg |
Average MOS Listening Quality score received during test execution. MOS is calculated using the ITU-T, G.107 E-model. Average MOS Listening Quality score received during test execution. MOS is calculated using the ITU-T, G.107 E-model. This is only reported for Encoded RTP traffic. For Simulated RTP traffic, refer to the MOS statistic. Type: double Default: 0 |
| MosLqMax |
Maximum MOS Listening Quality score received during test execution. MOS is calculated using the ITU-T, G.107 E-model. Type: double Default: 0 |
| MosLqMin |
Minimum MOS Listening Quality score received during test execution. MOS is calculated using the ITU-T, G.107 E-model. Type: double Default: 0 |
| NonInviteSessionsFailCount |
Number of failed NON-INVITE sessions. Type: u64 Default: 0 |
| NonInviteSessionsFailTimerFCount |
Number of failed NON-INVITE sessions due to the expiration of timer F. Type: u64 Default: 0 |
| NonInviteSessionsFailTransErrCount |
Number of failed NON-INVITE sessions due to a transport error. Type: u64 Default: 0 |
| NonInviteSessionsInitiatedCount |
Number of NON-INVITE sessions initiated. Type: u64 Default: 0 |
| NonInviteSessionsSucCount |
Number of successful NON-INVITE sessions. Type: u64 Default: 0 |
| ParentName |
Name of the SipUaProtocolConfig for which the results apply. Type: string Default: "" (empty string) |
| RegistrationAttemptCount |
SIP UAs count that will attempt to register to SIP proxy. Type: u64 Default: 0 |
| RegistrationAvgTime |
Average registration time of all SIP UAs registration. Type: u32 Default: 0 |
| RegistrationFailureCount |
SIP UAs count that registered to SIP proxy unsuccessfully. Type: u64 Default: 0 |
| RegistrationMaxTime |
Maximum time in all SIP UAs registration. Type: u32 Default: 0 |
| RegistrationMinTime |
Minimum time in all SIP UAs registration. Type: u32 Default: 0 |
| RegistrationRetryCount |
SIP UAs count that trying to register to SIP proxy unsuccessfully. Type: u64 Default: 0 |
| RegistrationSuccessCount |
SIP UAs count that registered to SIP proxy successfully. Type: u64 Default: 0 |
| RegistrationSuccessPercent |
Percent of SIP UAs registered successfully. Type: double Default: 0 |
| ReTranByeCount |
Number of BYEs retransmitted. Type: u64 Default: 0 |
| ReTranInviteCount |
Number of Invites retransmitted. Type: u64 Default: 0 |
| RtpPacketsDiscardCount |
Number of RTP packets discarded. Type: u64 Default: 0 |
| RtpPacketsLostCount |
Number of RTP packets lost. Type: u64 Default: 0 |
| RtpPacketsRxCount |
Number of RTP packets received. Type: u64 Default: 0 |
| RxAckCount |
Number of ACKs received. Type: u64 Default: 0 |
| RxByeCount |
Number of BYEs received. Type: u64 Default: 0 |
| RxInviteCount |
Number of Invites received. Type: u64 Default: 0 |
| RxResponseCode1XXCount |
Number of 1xxx responses received. Type: u64 Default: 0 |
| RxResponseCode2XXCount |
Number of 2xxx responses received. Type: u64 Default: 0 |
| RxResponseCode3XXCount |
Number of 3xxx responses received. Type: u64 Default: 0 |
| RxResponseCode4XXCount |
Number of Client Failure response messages received. Type: u64 Default: 0 |
| RxResponseCode5XXCount |
Number of Server Failure response messages received. Type: u64 Default: 0 |
| RxResponseCode6XXCount |
Number of Global Failure response messages received. Type: u64 Default: 0 |
| SessionRefreshesCount |
Number of calls for which a refresh/update was performed. Type: u64 Default: 0 |
| TotalUaCount |
Total SIP UAs count. Type: u64 Default: 0 |
| TxAckCount |
Number of ACKs sent. Type: u64 Default: 0 |
| TxByeCount |
Number of BYEs sent. Type: u64 Default: 0 |
| TxInviteCount |
Number of Invites sent. Type: u64 Default: 0 |
| TxResponseCode1XXCount |
Number of 1xxx responses sent. Type: u64 Default: 0 |
| TxResponseCode2XXCount |
Number of 2xxx responses sent. Type: u64 Default: 0 |
| TxResponseCode3XXCount |
Number of 3xxx responses sent. Type: u64 Default: 0 |
| TxResponseCode4XXCount |
Number of Client Failure response messages sent. Type: u64 Default: 0 |
| TxResponseCode5XXCount |
Number of Server Failure response messages sent. Type: u64 Default: 0 |
| TxResponseCode6XXCount |
Number of Global Failure response messages sent. Type: u64 Default: 0 |
| VideoBurstCount |
Number of burst periods where significant packet loss/discard is occurring. Type: u32 Default: 0 |
| VideoBurstLength |
Average length of a packet loss burst in transport packets. Type: u32 Default: 0 |
| VideoBurstLossRate |
Proportion of packets lost (before application of error correction algorithms) during burst periods. Type: double Default: 0 |
| VideoGapCount |
Number of gap periods where no significant packet loss/discard is occurring. Type: u32 Default: 0 |
| VideoGapLength |
Average length of a gap in transport packets. Type: u32 Default: 0 |
| VideoGapLossRate |
Proportion of packets lost (before application of error correction algorithms) during gap periods. Type: double Default: 0 |
| VideoIntervalAvgPpdv |
Average frame inter-arrival jitter, in milliseconds. The inter-arrival jitter is computed relative to the expected arrival time based on the frame rate. Type: double Default: 0 |
| VideoIntervalTransportPktCount |
Number of transport packets received for the measurement interval. Type: u32 Default: 0 |
| VideoIntervalTransportPktDiscardedCount |
Number of transport packets discarded during the measurement interval. Type: u32 Default: 0 |
| VideoIntervalTransportPktEffLossRate |
Proportion of transport packets lost or discarded (minus corrected) during the measurement interval. Type: double Default: 0 |
| VideoIntervalTransportPktLostCount |
Number of transport packets lost for the measurement interval. Type: u32 Default: 0 |
| VideoPktLossDegradSev |
Severity of quality degradation that is attributed to network transport packet loss. Type: u8 Default: 0 |
| VideoPpdv |
Stream transport Packet-to-Packet Delay Variation (RFC3550) in milliseconds. Type: double Default: 0 |
| VideoTransportPktCount |
Number of transport packets received. Type: u32 Default: 0 |
| VideoTransportPktLostCount |
Number of transport packets lost. Type: u32 Default: 0 |
| VideoUncorrLossProp |
Total proportion of stream transport packets lost in the transport network. Type: double Default: 0 |