TeParams Object

Description:

Traffic engineered (TE) parameters.

Writable Attributes
Read-Only Attributes

Parents: IsisLspGenParams, Ospfv2LsaGenParams

Automatically created from: BgpLsLinkAttribute, BgpLsScaleRouteAttributes, BgpRouteGenParams, IsisAppSpecAttrSubTlv, IsisL2BundleAdjSidSubTlv, IsisL2BundleLanAdjSidSubTlv, IsisLspNeighborConfig, LinkTlv, Ospfv2RouterConfig

TeParams Writable Attributes

Attribute

Description

Common Writable Attributes

Active, Name

BandwidthUnit

Bandwidth units of measurement.

Type: enum

Default: BYTES_PER_SEC

Possible Values:

Value	Description
BITS_PER_SEC	Bandwidths are in bits per second.
BYTES_PER_SEC	Bandwidths are in bytes per second.
MBYTES_PER_SEC	Bandwidths are in mega bytes per second.

ExtAdminGroup

Extended Administrative Group

Type: u32

Default: 0

Range: 0 - 4294967295

GeneralMetricType

Metric Type field of Generic Metric Sub TLV

Type: u8

Default: 0

GeneralMetricValue

Value field of Generic Metric Sub TLV

Type: u32

Default: 0

Range: 0 - 16777215

SubTlv

Traffic engineering sub-TLV (type, length, value) type of information about resources of routed links.

Type: enum

Default: NONE

Possible Values:

Value	Description
NONE	No sub-TLV is used.
GROUP	4-octet bit mask assigned by the network administrator. Each bit corresponds to one administrative group assigned to the interface.
MAX_BW	Maximum bandwidth that can be used on the link from the emulated router.
MAX_RSV_BW	Maximum bandwidth that can be reserved on the link.
UNRESERVED	Amount of bandwidth not yet reserved at each of the eight priority levels. The values correspond to the bandwidth that can be reserved with a setup priority of 0 through 7. Arranged in ascending order, priority 0 occurs at the start of the sub-TLV and priority 7 at the end. The initial values, before any bandwidth is reserved, are all set to the maximum reservable bandwidth. Each value will be less than or equal to the maximum reservable bandwidth.
LOCAL_IP	IP address of the interface corresponding to the current link.
REMOTE_IP	IP address of the neighbor's interface corresponding to the current link.
DEFAULT_METRIC	Default Metric.
IPV6_LOCAL_IP	IPv6 address of the interface corresponding to the current link.
IPV6_REMOTE_IP	IP address of the neighbor's interface corresponding to the current link.
UNIDIRECTIONAL_LINK_DELAY	Unidirectional Link Delay.
MIN_MAX_UNIDIRECTIONAL_LINK_DELAY	Min/Max Unidirectional Link Delay.
UNIDIRECTIONAL_DELAY_VARIATION	Unidirectional Delay Variation.
UNIDIRECTIONAL_LINK_LOSS	Unidirectional Link Loss.
UNIDIRECTIONAL_RESIDUAL_BANDWIDTH	Unidirectional Residual Bandwidth.
UNIDIRECTIONAL_AVAILABLE_BANDWIDTH	Unidirectional Available Bandwidth.
UNIDIRECTIONAL_UTILIZED_BANDWIDTH	Unidirectional Utilized Bandwidth.
EXTENDED_ADMINISTRATIVE_GROUP	Enumeration Of Extended Administrative Group
GENERIC_METRIC	Generic Metric

TeDefaultMetric

TE default Metric

Type: u32

Default: 0

Range: 0 - 16777215

TeGroup

4-octet bit mask assigned by the network administrator. Each bit corresponds to one administrative group assigned to the interface.

Type: u32

Default: 1

Range: 1 - 4294967295

TeLocalIpv4Addr

IP address of the interface corresponding to the current link.

Type: ip

Default: 0.0.0.0

TeLocalIpv6Addr

Local IP

Type: ipv6

Default: 2000::

TeMaxBandwidth

Maximum bandwidth that can be used on the link from the emulated router.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeMinMaxUniLinkDelayAFlag

A-flag.

Type: bool

Default: FALSE

Possible Values:

Value	Description
TRUE	Set.
FALSE	Unset.

TeMinMaxUniLinkMaxDelay

Min/Max Unidirectional Link Max Delay.

Type: u32

Default: 1000000

Range: 1 - 16777215

TeMinMaxUniLinkMinDelay

Min/Max Unidirectional Link Min Delay.

Type: u32

Default: 100000

Range: 1 - 16777215

TeRemoteIpv4Addr

IP address of the neighbor's interface corresponding to the current link.

Type: ip

Default: 0.0.0.0

TeRemoteIpv6Addr

Remote IP

Type: ipv6

Default: 2000::

TeRsvrBandwidth

Maximum bandwidth that can be reserved on the link from the emulated router.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeUniAvailableBandwidth

Unidirectional Available Bandwidth.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeUniDelayVariation

Unidirectional Delay Variation.

Type: u32

Default: 100000

Range: 1 - 16777215

TeUniLinkDelay

Unidirectional Link Delay.

Type: u32

Default: 100000

Range: 1 - 16777215

TeUniLinkDelayAFlag

A-flag.

Type: bool

Default: FALSE

Possible Values:

Value	Description
TRUE	Set.
FALSE	Unset.

TeUniLinkLoss

Unidirectional Link Loss.

Type: double

Default: 3

Range: 0.000003 - 50.331642

TeUniLinkLossAFlag

A-flag.

Type: bool

Default: FALSE

Possible Values:

Value	Description
TRUE	Set.
FALSE	Unset.

TeUniResidualBandwidth

Unidirectional Residual Bandwidth.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeUniUtilizedBandwidth

Unidirectional Utilized Bandwidth.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeUnRsvrBandwidth0

Amount of bandwidth not yet reserved at priority level 0.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeUnRsvrBandwidth1

Amount of bandwidth not yet reserved at priority level 1.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeUnRsvrBandwidth2

Amount of bandwidth not yet reserved at priority level 2.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeUnRsvrBandwidth3

Amount of bandwidth not yet reserved at priority level 3.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeUnRsvrBandwidth4

Amount of bandwidth not yet reserved at priority level 4.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeUnRsvrBandwidth5

Amount of bandwidth not yet reserved at priority level 5.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeUnRsvrBandwidth6

Amount of bandwidth not yet reserved at priority level 6.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeUnRsvrBandwidth7

Amount of bandwidth not yet reserved at priority level 7.

Type: u32

Default: 100000

Range: 1 - 4294967295

TeParams Read-Only Attributes

There are no read-only attributes.