VxlanEvpnOverlayGenVtepParams Object

HOME | TECHNOLOGIES | TEST CONFIGURATION | SEQUENCER COMMANDS | GUI COMMAND NAMES | ALL COMMANDS | RESULT | PDU | ALL | OBJECT TREE

Description:

Configuring General Vtep Parameters under Vxlan Evpn Overlay

Automatically created from: VxlanEvpnOverlayConfigGenParams

VxlanEvpnOverlayGenVtepParams Writable Attributes

Attribute Description
Common Writable Attributes Active, Name
AutoSelectUdpSourcePort

Specifies the option of auto selecting UDP Source Port

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enable Auto Select UDP Source Port
FALSE

Disable Auto Select UDP Source Port
EnableEvpnOverlayIRB

Support for EVPN Overlay IRB mode

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Enables IRB for EVPN Ovelray

FALSE

Disables IRB for EVPN Ovelray

EnableRouteReflector

Support for Route Reflector

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Enables Route Reflector
FALSE

Disables Route Reflector

EnableUdpChecksum

Specifies the option of Enabling UDP Checksum

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Enable UDP Checksum

FALSE

Disable UDP Checksum

EvpnOverlayIRBMode

Select the IRB mode required

Type: enum

Default: SYMMETRIC

Possible Values:

Value Description
SYMMETRIC

IRB mode as Symmetric
ASYMMETRIC

IRB mode as Aaymmetric
IgpProtocol

Specifies which IGP protocol (OSPF/ISIS) to be configured on the VXLAN VTEP

Type: enum

Default: NONE

Possible Values:

Value Description
NONE

No IGP protocol on VTEP
OSPF

Enables IGP-OSPF protocol on VTEP
ISIS

Enables IGP-ISIS protocol on VTEP
BGP

Enables IGP-BGP Underlay protocol
OSPFV3

Enables IGP-OSPFv3 protocol on VTEP
MultiHomedVtep

Confiquring Multi-Homed Vtep

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Enable Multi-Homed Vtep

FALSE

Disable Multi-Homed Vtep
MultiHomedVtepType

Type of Multi-Homed VTEP

Type: enum

Default: WITHIN_PORT

Possible Values:

Value Description
ACROSS_VLAN

Multi-homing across VLANs

ACROSS_PORT

Multi-homing across Ports

WITHIN_PORT

Multi-homing within Port
NumberOfDutPerSpine

Configuring Number of DUT per Spine/Gateway

Type: u16

Default: 1

Range: 1 - 65535
NumberOfMultiHomedVteps

Configuring Number of Multi homed Vteps

Type: u16

Default: 1

Range: 1 - 65535
NumberOfSpine

Configuring Number of Spine/Gateway

Type: u16

Default: 2

Range: 2 - 65535
SameGwForVtepInterface

Configuring Use same Spine/Gateway for vtep interfaces

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enable use same Spine/Gateway for vtep interface
FALSE

Disable use same Spine/Gateway for vtep interface
SameMacIpForVtepInterface

Configuring Use same Mac/IP for multi-homed Vtep

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Enable Use same Mac/IP for multi-homed vtep
FALSE

Disable Use Same Mac/IP for multi-homed vtep
UdpSourcePort

Configuring UDP Source Port

Type: u16

Default: 1025

Range: 1 - 65535
UdpSourcePortStep

Configuring UDP Source Port Increment

Type: u16

Default: 1

Range: 0 - 32767
VtepsPerSubInterfaceCount

Configuring Number of VTEPs per VLAN

Type: u16

Default: 1

Range: 1 - 65535

VxlanEvpnOverlayGenVtepParams Read-Only Attributes

There are no read-only attributes.