Description:
Configuring Ip Prefix Route Parameters under Vxlan Evpn Overlay
Automatically created from: VxlanEvpnOverlayConfigGenParams
Attribute | Description | ||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||||||||||||||||||||||||||||||||||||||
AdvertiseGatewayInType2Route |
Specifies the option of Advertising Gateway In Type-2 Route Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||
AutoConfigureRdRt |
Specifies the option of auto configuring RouteDistinguisher/RouteTarget Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||
ConfigureIpPrefixRd |
Configuring IP Prefix RD Type: enum Default: AS_L2_VNI Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||
ConfigureIpPrefixRt |
Configuring IP Prefix RT Type: enum Default: AS_L2_VNI Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||
EnableType5PrefixMatch |
Enables/Disables the Prefix Match for IP Prefix route (Type-5). Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||
GatewayType |
Configuring Gateway Type with default value as VA_ADDR Type: enum Default: VA_ADDR Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||
IpPrefixMode |
Configuring the mode of Ip Prefix with default value as IPV4 Type: enum Default: IPV4 Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||
Ipv4PrefixAddr |
Configuring Ipv4 Prefix Address Type: ip Default: 100.1.1.0 |
||||||||||||||||||||||||||||||||||||||||||
Ipv4PrefixAddrStep |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Configuring Ipv4 Prefix Address Increment Type: ip Default: 0.0.1.0 |
||||||||||||||||||||||||||||||||||||||||||
Ipv4PrefixAddrStepPerPort |
Configuring Ipv4 Address Increment per Port Type: ip Default: 0.0.0.0 |
||||||||||||||||||||||||||||||||||||||||||
Ipv4PrefixAddrStepPerSegmentBlock |
Configuring Ipv4 Prefix Address Increment per Segment Type: ip Default: 0.1.0.0 |
||||||||||||||||||||||||||||||||||||||||||
Ipv4PrefixAddrStepPerVtep |
Configuring Ipv4 Address Increment per VTEP Type: ip Default: 0.0.0.0 |
||||||||||||||||||||||||||||||||||||||||||
Ipv4PrefixLength |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Configuring Ipv4 Prefix Length Type: u8 Default: 24 Range: 0 - 32 |
||||||||||||||||||||||||||||||||||||||||||
Ipv4PrefixStep |
Ipv4 Prefix Step. Type: ip Default: 0.0.1.0 |
||||||||||||||||||||||||||||||||||||||||||
Ipv6PrefixAddr |
Configuring Ipv6 Prefix Address Type: ipv6 Default: 6001::0 |
||||||||||||||||||||||||||||||||||||||||||
Ipv6PrefixAddrStep |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Configuring Ipv6 Prefix Address Increment Type: string Default: 0:0:0:1:: |
||||||||||||||||||||||||||||||||||||||||||
Ipv6PrefixAddrStepPerPort |
ConfiguringIpv6 Address Increment per Port Type: ipv6 Default: :: |
||||||||||||||||||||||||||||||||||||||||||
Ipv6PrefixAddrStepPerSegment |
Configuring Ipv6 Address Increment per Segment Type: ipv6 Default: 0:0:1:: |
||||||||||||||||||||||||||||||||||||||||||
Ipv6PrefixAddrStepPerVtep |
Configuring Ipv6 Address Increment per VTEP Type: ipv6 Default: :: |
||||||||||||||||||||||||||||||||||||||||||
Ipv6PrefixLength |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Configuring Ipv6 Prefix Length Type: u8 Default: 64 Range: 0 - 128 |
||||||||||||||||||||||||||||||||||||||||||
Ipv6PrefixStep |
Ipv6 Prefix Step. Type: string Default: 0:0:0:1:: |
||||||||||||||||||||||||||||||||||||||||||
Ipv6VxlanIpPrefixRd |
Specifies the IP Prefix RD value to be configured in Route when VXLAN is IPv6 Type: enum Default: AS_L2_VNI Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||
Ipv6VxlanIpPrefixRt |
Specifies the IP Prefix RT value to be configured in Route when VXLAN is IPv6 Type: enum Default: AS_L2_VNI Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||
PrefixCountPerSegment |
Configuring Prefix Count per Segment Type: u32 Default: 1 Range: 1 - 2000000 |
||||||||||||||||||||||||||||||||||||||||||
PrefixLengthIpv4 |
Specifies the Prefix Length of IPv4 Prefixes to be configured. Type: u8 Default: 24 Range: 0 - 32 |
||||||||||||||||||||||||||||||||||||||||||
PrefixLengthIpv6 |
Specifies the Prefix Length of IPv6 Prefixes to be configured. Type: u8 Default: 64 Range: 0 - 128 |
||||||||||||||||||||||||||||||||||||||||||
RdOffset |
Configuring RD Offset Type: u16 Default: 0 |
||||||||||||||||||||||||||||||||||||||||||
RouteDistinguisher |
Configuring Route Distinguisher Type: string Default: 192.0.0.1:1 |
||||||||||||||||||||||||||||||||||||||||||
RouteDistinguisherStep |
Configuring Route Distinguisher Increment Type: string Default: 0:1 |
||||||||||||||||||||||||||||||||||||||||||
RouteTarget |
Configuring Route Target Type: string Default: 100:1 |
||||||||||||||||||||||||||||||||||||||||||
RouteTargetStep |
Configuring Route Target Increment Type: string Default: 0:1 |
||||||||||||||||||||||||||||||||||||||||||
UseSameIpPrefixRdRtAccrossVteps |
Use same RD/RT across VTEPs Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||||||||||
VaIpAddr |
Configuring VA IP Address Type: ip Default: 200.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||
VaIpAddrStep |
Configuring VA IP Address Increment Type: ip Default: 0.0.0.1 |
||||||||||||||||||||||||||||||||||||||||||
VaIpAddrStepPerPort |
Configuring VA IP Address Increment per Port Type: ip Default: 0.0.0.0 |
||||||||||||||||||||||||||||||||||||||||||
VaIpAddrStepPerSegment |
Configuring VA IP Address Increment per Segment Type: ip Default: 0.0.1.0 |
||||||||||||||||||||||||||||||||||||||||||
VaIpv6Addr |
Configuring VA IPV6 Address Type: ipv6 Default: 6002::1 |
||||||||||||||||||||||||||||||||||||||||||
VaIpv6AddrStep |
Configuring VA IPV6 Address Increment Type: string Default: ::1 |
||||||||||||||||||||||||||||||||||||||||||
VaIpv6AddrStepPerPort |
Configuring VA IPV6 Address Increment per Port Type: ipv6 Default: :: |
||||||||||||||||||||||||||||||||||||||||||
VaIpv6AddrStepPerSegment |
Configuring VA IPV6 Address Increment per Segment Type: ipv6 Default: ::1:0 |
||||||||||||||||||||||||||||||||||||||||||
VaMacAddr |
Configuring VA Mac Address Type: mac Default: 00:10:10:01:00:00 |
||||||||||||||||||||||||||||||||||||||||||
VaMacAddrPerSegment |
Configuring VA Mac Address per Segment Type: mac Default: 00:00:00:01:00:00 |
||||||||||||||||||||||||||||||||||||||||||
VaMacAddrStep |
Configuring VA Mac Address Increment Type: string Default: 00:00:00:00:00:01 |
||||||||||||||||||||||||||||||||||||||||||
VaMacAddrStepPerPort |
Configuring VA Mac Address Step per Port Type: mac Default: 00:00:00:00:00:00 |
||||||||||||||||||||||||||||||||||||||||||
VniType |
Configuring type of VNI with default values as L2_VNI Type: enum Default: L2_VNI Possible Values:
|
There are no read-only attributes.