eCPRI ORAN Message Parameters
Multiple eCPRI messages can be configured in the Configure eCPRI oran Messages dialog box for each eCPRI device block.
Additional commands are available via the toolbar and shortcut menu.
| Field | Description | Values | Default | ||||||
|---|---|---|---|---|---|---|---|---|---|
|
Port Name |
Read-only port name | N/A | N/A | ||||||
| Device Name | Read-onlydevice name | N/A | N/A | ||||||
| Name | Default name used to identify this message | 255 alphanumeric characters | Assigned system name | ||||||
| Active |
Select to enable the message. Clear to disable the message. Disabled messages are not used in a test. The configuration for a message is retained when it is disabled and is available as configured if the message is re-enabled. |
N/A | Selected | ||||||
| CC ID Count | Increment value with which to create subsequent component carrier identifiers | 1-16 | 1 | ||||||
| DU Port ID Bitwidth | Bitwidth of Distributed Unit Identifier | 1-13 | 4 | ||||||
| Band Sector ID Bitwidth | Bitwidth of Band and Sector Identifier | 1-13 | 4 | ||||||
| CC ID Bitwidth | Bitwidth of Component-Carrier Identifier | 1-13 | 4 | ||||||
| RU Port ID Bitwidth | Bitwidth of spatial stream identifier | 1-13 | 4 | ||||||
| eAxC ID (hex) | Configure 16-bit extended Antenna-Carrier identifier in hex format | 0000-FFFF | 0010 | ||||||
| IQ Sample file | Select an uploaded IQ sample file | Valid IQ sample file | empty | ||||||
| Ignore Absolute Zero IQ Values | Select to ignore absolute zero IQ values | N/A | Cleared | ||||||
| Section Type | Section type in the C-Plane message | Type 1, Type 3 | Type 1 | ||||||
| FFT Size |
Available when Section Type is set to Type 3 Number of points in the Fast Fourier Transform in the frame structure |
128, 256, 512, 1024, 2048, 4096, 1536 | 128 | ||||||
| CP Length |
Available when Section Type is set to Type 3 Length of the cyclic prefix in the C-Plane message |
0-65535 | 8 | ||||||
| Beam ID | Value of the beam identifier | 0-32767 | 0 | ||||||
| reMask (bits) | Resource element mask for DL and UL allocation | 12-bit binary value | 111111111111 | ||||||
| Enable Section Extensions | Select to configure section extension values | N/A | Cleared | ||||||
| Section ID | Value of the section identifier | 0-4095 | 1 | ||||||
| Section Extension Flags |
Available when Enable Section Extensions is selected Select the extension type |
Section Extension Type 1, Section Extension Type 11 | Section Extension Type 1 | ||||||
| Beamforming Weight IQ Sample File |
Available when Enable Section Extensions is selected Click the ellipsis to upload a sample file |
N/A | N/A | ||||||
| Beamforming Weight Count |
Available when Enable Section Extensions is selected
|
N/A | 1 | ||||||
| Prbs Per Bundle (numBundPrb) |
Available when Section Extension Type 11 is selected in Beamforming Weight Count Number of PRBs to create per bundle |
1-255 | 1 |