eCPRI Devices Parameters
Use the eCPRI device grid to manually configure devices for your test. For information on setting up an eCPRI test and adding a device, see Using Spirent TestCenter to Test eCPRI. A summary row at the bottom of the grid displays totals for number of devices configured.
Additional commands are available via the toolbar and shortcut menu.
NOTE: For TestCenter IQ eCPRI ORAN Filtered Stream Results to work, you must select the following ECPRI filters on the Traffic Analyzer Template Filter tab.
Real time control data / IQ data transfer message series identifier
ORAN message
|
Element | Description | Values | Default | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Port Name |
Default name. Editable. |
N/A | N/A | ||||||||
Device Name |
Name of the emulated eCPRI router |
N/A | N/A | ||||||||
Tags |
Select one or more tags to organize objects See Tag Editor for information on managing tags |
N/A | Cleared | ||||||||
Device Count | Number of devices as configured on the Emulated Device Interface tab | 1-4294967295 | 1 | ||||||||
Active |
Select the checkbox to enable eCPRI on this router. Clear to disable eCPRI. Disabled routers are not used in a test. The configuration for a router is retained when it is disabled and is available as configured if the router is re-enabled. |
N/A | Cleared | ||||||||
Read-only. Reports the status of the emulated PCE.
|
N/A | N/A | |||||||||
eCPRI Encapsulation | Encapsulation method for eCPRI | eCPRI over Ethernet, eCPRI over IPv4/UDP, eCORI over IPv6/UDP | eCPRI over Ethernet | ||||||||
UDP Destination Port |
Available when eCPRI Encapsulation is set to eCPRI over IPv4/UDP or eCPRI over IPv6/UDP UDP port number of the destination |
Valid UDP port | 1025 | ||||||||
Destination MAC Address | MAC address of the destination | Valid MAC address | 01:80:C2:00:00:0E | ||||||||
Request Time Interval (micro sec) | Number of microseconds between requests | 0-4294967295 | 1000 | ||||||||
Response Options |
Click the ellipsis to configure
|
N/A |
N/A | ||||||||
Override U-Plane VLAN | Select to configure the U-Plane VLAN | N/A | Cleared | ||||||||
U-Plane VLAN ID | VLAN ID of the U-Plane | Valid VLAN ID | 100 | ||||||||
U-Plane VLAN Priority | VLAN Priority for the U-Plane | 0-7 | 7 |