Description:
Specifies EVPN Route parameters used in VXLAN wizard to configure EVPN routes.
Automatically created from: VxlanConfigGenParams, VxlanVmGenParams
| Attribute | Description | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||||||||||||||||||||||||||
| VxlanActiveStandbyMode |
Specifies the active standby mode of the Ethernet segment. This field is enabled only when Ad route type is set to per ESI. Type: enum Default: SINGLE_ACTIVE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanAutoConfigureRd |
Auto configuration for RD from vxlan wizard Type: enum Default: AS_VNI Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanAutoConfigureRt |
Auto configuration for RT from vxlan wizard Type: enum Default: AS_VNI Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanConfigureNextHop |
option for Custom Next Hop address Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanEnableAutoConfigureRdRt |
RD and RT Auto configuration option Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanEthernetSegmentId |
Ethernet Segment Identifier Value. Type: string Default: 00:00:00:00:00:00:00:00:00 |
||||||||||||||||||||||||||||||
| VxlanEthernetSegmentIdStep |
Increment value for ESI for each successive routeblock. Type: string Default: 00:00:00:00:00:00:00:00:00 |
||||||||||||||||||||||||||||||
| VxlanEthernetSegmentValueType |
ESI Type is a 1 octet field that specifies the format of the remaining 9 octets of the ESI Value. ESI is a unique non-zero identifier that identifies an Ethernet segment. Type: enum Default: TYPE0 Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanEthernetTagId |
Ethernet Tag ID is a 32-bit field that identifies a particular broadcast domain in an EVPN Instance. Type: u32 Default: 0 |
||||||||||||||||||||||||||||||
| VxlanEviCount |
Number of EVPN instances. Type: u32 Default: 1 |
||||||||||||||||||||||||||||||
| VxlanEvpnIpPrefixGatewayType |
EVPN IP Prefix Gateway Type Type: enum Default: VaIpAddress Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanEvpnRouterMacAddress |
MAC address of the Virtual Appliance (VA) in IP Prefix routes. Type: mac Default: 00:00:10:01:00:00 |
||||||||||||||||||||||||||||||
| VxlanEvpnRouterMacAddressStep |
Increment value for VA's MAC address for each successive IP Prefix routeblock. Type: mac Default: 00:00:00:00:00:01 |
||||||||||||||||||||||||||||||
| VxlanEvpnRouterMacExtCommunity |
Specifies whether to advertise Router's MAC extended community attribute in IP Prefix routes. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanEvpnTopologyTypes |
Specifies the EVPN topology types. Type: enum Default: Custom Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanNextHop |
Configuration for Next Hop address Type: ip Default: 192.168.100.2 |
||||||||||||||||||||||||||||||
| VxlanNextHopDeviceStep |
Configuration for Next Hop address step Type: ip Default: 0.0.0.1 |
||||||||||||||||||||||||||||||
| VxlanNextHopPortStep |
Configuration for Next Hop address port step Type: ip Default: 0.0.0.1 |
||||||||||||||||||||||||||||||
| VxlanRouteDistinguisher |
Route distinguisher (RD) in string format. Type: string Default: 192.0.0.1:1 |
||||||||||||||||||||||||||||||
| VxlanRouteDistinguisherStep |
Increment value for RD for each successive VRF within a routeblock. Type: string Default: 0:1 |
||||||||||||||||||||||||||||||
| VxlanRouteTarget |
String value of the extended community path Route Target attribute. Type: string Default: 100:1 |
||||||||||||||||||||||||||||||
| VxlanRouteTargetStep |
Increment value for RT for each successive VRF within a routeblock. Type: string Default: 0:1 |
||||||||||||||||||||||||||||||
| VxlanVaIpAddress |
IP address of the Virtual Appliance (VA) in IP Prefix routes. Type: ip Default: 100.1.0.0 |
||||||||||||||||||||||||||||||
| VxlanVaIpAddressStep |
Increment value for VA IP address for each successive IP Prefix routeblock. Type: ip Default: 0.0.0.1 |
||||||||||||||||||||||||||||||
| VxlanVaIpv6Address |
VA IPv6 Address configuration Type: ipv6 Default: 2002::1 |
||||||||||||||||||||||||||||||
| VxlanVaIpv6AddressStep |
VA IPv6 Address configuration step Type: ipv6 Default: 0::1 |
||||||||||||||||||||||||||||||
| VxlanWizardAdRoute |
Specifies whether to create EVPN AD routes. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanWizardAdRouteEsi |
Specifies if the type of AD routes to be created is per ESI. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanWizardAdRouteEvi |
Specifies if the type of AD routes to be created is per EVI. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanWizardADRouteType |
Specifies the type of AD routes to be created. Type: enum Default: PER_ESI Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanWizardEthernetSegmentRoute |
Specifies whether to create EVPN Ethernet Segment routes. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanWizardInclusiveMulticastRoute |
Specifies whether to create EVPN Inclusive Multicast routes. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanWizardIpPrefixRoute |
Specifies whether to create EVPN IP prefix routes. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanWizardIpUnicastRoute |
Unicast Router from VXLAN wizard Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanWizardMacAndIpRoute |
Both MAC and IP Route in Type2 Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanWizardMacIpRoute |
Specifies whether to create EVPN MAC/IP routes. Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||||||||||||||
| VxlanWizardMacOnlyRoute |
Enable MAC Route only in Type2 Type: bool Default: FALSE Possible Values:
|
There are no read-only attributes.