Description:
General Parameters for Vxlan Configuration
Parents: Project
Children: VxlanGenHostPortParams, VxlanGenVtepPortParams
Automatically created from: VxlanTrafficParams
Automatically-created children: BgpEvpnRouteParams, VxlanGenHostParams, VxlanGenVtepParams, VxlanL3VniParams
| Attribute | Description | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||||||
| AsByteMode |
Describes AS Type with default value as 2-byte AS Type: enum Default: As2Byte Possible Values:
|
||||||||||
| AsNum |
Configuring AS Number Type: u16 Default: 1 Range: 1 - 65535 |
||||||||||
| AsNum4Byte |
Configuring 4-Byte AS Number Type: string Default: 1.1 |
||||||||||
| AsNum4ByteStep |
Configuring 4-Byte AS Number Step Type: string Default: 0 |
||||||||||
| AsNum4ByteStepPerPort |
Configuring 4-Byte AS Number Step Per Port Type: string Default: 0 |
||||||||||
| AsNumStep |
Configuring AS Number Step Type: u16 Default: 1 Range: 0 - 65535 |
||||||||||
| AsNumStepPerPort |
Configuring AS Number Step Per Port Type: u16 Default: 0 Range: 0 - 65535 |
||||||||||
| BgpMode |
BGP mode selected under segment learning mode as EVPN Overlay Type: enum Default: EBGP Possible Values:
|
||||||||||
| ConfigureL3Vni |
Describes the option of configuring L3 Vni Type: bool Default: FALSE Possible Values:
|
||||||||||
| DutAs |
Configuring DUT AS Number Type: u16 Default: 1001 Range: 1 - 65535 |
||||||||||
| DutAs4Byte |
Configuring 4-Byte DUT AS Number Type: string Default: 1.1001 |
||||||||||
| DutAsNum4ByteStep |
Configuring 4-Byte DUT AS Number Step Type: string Default: 0 |
||||||||||
| DutAsNum4ByteStepPerPort |
Configuring 4-Byte DUT AS Number Step Per Port" Type: string Default: 0 |
||||||||||
| DutAsNumStepPerPort |
Configuring DUT AS Number Step Per Port Type: u16 Default: 0 Range: 0 - 65535 |
||||||||||
| DutAsStep |
ConfiguringDUT AS Number Step Type: u16 Default: 1 Range: 0 - 65535 |
||||||||||
| DutIpAddr |
Configuring DUT IPv4 Address Type: ip Default: 10.0.0.1 |
||||||||||
| DutIpAddrStep |
Configuring DUT IPv4 Address Step Type: ip Default: 0.0.0.1 |
||||||||||
| IgmpMulticastVersion |
IGMP with default value as IGMP_V2 Type: enum Default: IGMP_V2 Possible Values:
|
||||||||||
| PimModeVxlan |
PIM MODE as option with default value as SM Type: enum Default: SM Possible Values:
|
||||||||||
| UseBiDir |
Specifies User Defined Source Type: bool Default: FALSE Possible Values:
|
||||||||||
| UseGatewayAsDut |
Specifies the option of using Gateway as DUT Type: bool Default: FALSE Possible Values:
|
||||||||||
| UseNonVxlanPorts |
Specifies the option of using NonVxlan Ports Type: bool Default: TRUE Possible Values:
|
||||||||||
| UseVxlanPorts |
Specifies the option of using Vxlan Ports Type: bool Default: TRUE Possible Values:
|
||||||||||
| VxlanBgpSessionIpAddress |
Describes the type of BGP Session IP under EVPN Overlay with default value as Interface IP Type: enum Default: InternfaceIp Possible Values:
|
||||||||||
| VxlanConfiguration |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Specifies the topology for Vxlan Configuration Type: enum Default: QUICK_TOPOLOGY Possible Values:
|
||||||||||
| VxlanMulticastIpAddress |
Configuring Multicast IP Address Type: ip Default: 225.0.0.1 |
||||||||||
| VxlanMulticastIpAddressStep |
Configuring Multicast IP Address step Type: ip Default: 0.0.0.1 |
||||||||||
| VxlanMulticastRpAddress |
Specifies RP Address under PIM-MODE as PIM-SM Type: ip Default: 192.0.0.1 |
||||||||||
| VxlanSegmentMulticastType |
Learning mode as multicast with default option as IGMP Type: enum Default: IGMP Possible Values:
|
||||||||||
| VxlanSegmentType |
Describes the Segment learning mode with default option as unicast Type: enum Default: UNICAST_CONFIGURATION Possible Values:
|
There are no read-only attributes.