Description:
Describes the Port parameters of Vtep
Parents: VxlanConfigGenParams
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| AffiliatedPort (AffiliationPort) |
Specifies port for selection |
| Attribute | Description | ||||||
|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||
| DutIpAddress |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Configuring DUT IP Address Type: ip Default: 192.168.100.1 |
||||||
| DutIpAddressStep |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. DUT IP Address Step Type: ip Default: 0.0.0.1 |
||||||
| EnableVlan |
Specifies the option of enabling vlan Type: bool Default: FALSE Possible Values:
|
||||||
| GatewayIpAddress |
Gateway IP Address Type: ip Default: 192.168.100.1 |
||||||
| GatewayIpAddressStep |
Gateway IP Address Step Type: ip Default: 0.0.0.1 |
||||||
| MacAddress |
Specifies Mac address Type: mac Default: 10:00:00:10:00:01 |
||||||
| MacAddressStep |
Specifies MAC Address Step Type: mac Default: 00:00:00:00:00:01 |
||||||
| PrefixLength |
Configuring IP Prefix Length Type: u8 Default: 24 Range: 0 - 32 |
||||||
| RouterId |
Configuring Router ID Type: ip Default: 10.1.1.1 |
||||||
| RouterIdStep |
Configuring Router ID Step Type: ip Default: 0.0.0.1 |
||||||
| SubInterfaceCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Sub-Interface Count Type: u16 Default: 1 Range: 0 - 65535 |
||||||
| SubInterfaceEnable |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Sub-Interface Enable Type: bool Default: FALSE Possible Values:
|
||||||
| VlanCount |
Specifies VLAN Count Type: u16 Default: 1 Range: 1 - 65535 |
||||||
| VlanId |
Configuring VLAN ID Type: u16 Default: 1 Range: 0 - 4095 |
||||||
| VlanIdStep |
Configuring VLAN ID Step Type: u16 Default: 1 Range: 0 - 4095 |
||||||
| VtepIpAddress |
Configuring Vtep Ip Address Type: ip Default: 192.168.100.2 |
||||||
| VtepIpAddressStep |
Configuring VTEP IP Address Step Type: ip Default: 0.0.0.1 |
||||||
| VtepTunnelIpAddress |
Configuring VTEP Tunnel IP Address based in Tunnel IP mode Type: enum Default: InternfaceIp Possible Values:
|
There are no read-only attributes.