Port Object
HOME |
TECHNOLOGIES |
TEST CONFIGURATION |
SEQUENCER COMMANDS |
GUI COMMAND NAMES |
ALL COMMANDS |
RESULT |
PDU |
ALL |
OBJECT TREE
Description:
Port.
Parents:
Project
Children:
Aal5If, AtmPhy, BfdStateSummary, BgpStateSummary, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, Dot1xPortConfig, Ethernet100GigFiber, Ethernet10GigCopper, Ethernet10GigFiber, Ethernet200GigFiber, Ethernet25GigFiber, Ethernet400GigFiber, Ethernet40GigFiber, Ethernet50GigFiber, Ethernet800GigFiber, EthernetCopper, EthernetFiber, EthernetPoECopper, EthIIIf, FcIf, FcPhy, FecModeObject, FlexEthernetClientConfig, FlexEthernetConfig, FlexEthernetPhyConfig, GreIf, GroupIf, HdlcIf, Ieee1588v2StateSummary, Ieee80211Phy, Ieee8021asStateSummary, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, IsisStateSummary, ItagIf, L1ConfigGroup, L2tpv2If, L2tpv3If, LacpPortConfig, LacpStateSummary, LagBfdPortConfig, LdpStateSummary, LispIf, LispStateSummary, LldpStateSummary, LogicIlCore, LspPingStateSummary, MacBlock, MacsecIf, MplsIf, MplsTpStateSummary, NoiseGenerator, Ospfv2StateSummary, Ospfv3StateSummary, PcsErrorInsertionConfig, PfcMeasurementConfig, PimStateSummary, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, POSPhy, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, Probe, RadarEmulationConfig, RandomErrorInsertionConfig, RipngStateSummary, Ripv4StateSummary, Rocev2PortConfig, RsvpStateSummary, SrpStateSummary, StpStateSummary, StreamBlock, SyncEthPortConfig, SyncEthStateSummary, TrillIf, TwampStateSummary, VbrasIf, VdpPortConfig, VlanBlock, VlanIf, VqAnalyzerPortGenParams, VxlanGpeIf, VxlanIf
Automatically created from:
BfdPortConfig, CoapPortConfig
Automatically-created children:
Analyzer, AncpPortConfig, AppPerfPortConfig, ArpCache, ArpNdReport, AutosarTimeSyncPortConfig, BgpPortConfig, Capture, CuspPortConfig, Dhcpv4PortConfig, Dhcpv6PortConfig, EcpriPortConfig, EnhancedL47PortConfig, EoamPortConfig, Generator, Host, Ieee1588v2PortConfig, IgmpPortConfig, L2tpPortConfig, LldpPortConfig, MldPortConfig, OpflexPortConfig, OsePortConfig, OvsdbPortConfig, PingReport, PppoxPortConfig, PppProtocolConfig, QbvStreamConfig, RoEPortConfig, SaaPortConfig, StpPortConfig, SystemResourceManager, VqAnalyzer, VxlanPortConfig
Result children (automatically created):
ArpCache, ArpNdReport, ArpNdResults, BfdStateSummary, BgpStateSummary, FcResults, GreIfPortResults, Ieee1588v2StateSummary, Ieee8021asStateSummary, IptvPortResults, IsisStateSummary, LacpStateSummary, LdpStateSummary, LispRouterResults, LispStateSummary, LldpStateSummary, LspPingStateSummary, MplsTpStateSummary, MsdpPortResults, OseControllerAggregateResults, Ospfv2StateSummary, Ospfv3StateSummary, PcepPortResults, PfcResults, PimStateSummary, PingReport, RipngStateSummary, Ripv4StateSummary, RsvpStateSummary, RxPortPairResults, SipPortResults, SonetAlarmsResults, SonetResults, SrpStateSummary, StoragePortResults, StpStateSummary, SyncEthStateSummary, TwampClientResults, TwampPortTestSessionResults, TwampServerResults, TwampStateSummary, TxPortPairResults, XmppvJPortResults
Relations:
Side name
(Type) |
Relative |
Description |
ActivePhy
(ActivePhy) |
AtmPhy, Ethernet100GigFiber, Ethernet10GigCopper, Ethernet10GigFiber, Ethernet200GigFiber, Ethernet25GigFiber, Ethernet400GigFiber, Ethernet40GigFiber, Ethernet50GigFiber, Ethernet800GigFiber, EthernetCopper, EthernetFiber, EthernetPoECopper, FcPhy, Ieee80211Phy, POSPhy
|
Identifies the currently active PHY object for this port. Use PortSetupSetActivePhyCommand and
PortSetupGetActivePhyCommand instead of manipulating this relation
directly.
|
AffiliatedPortSource
(AffiliationPort) |
AccessTestGenPortParams, ConvergenceIpv4EgressPortParams, ConvergenceIpv4IngressPortParams, ConvergenceIpv6EgressPortParams, ConvergenceIpv6IngressPortParams, CpriOverRoeGenPortConfig, EmulatedDevice, EvpnMplsCustPortGenParams, EvpnMplsProviderPortGenParams, FcLeftSidePortParams, FcoeLeftSidePortParams, FcoeRightSidePortParams, FcRightSidePortParams, Host, McastDownstreamPortParams, McastPortParams, McastUpstreamPortParams, MplsLdpCustEdgePortParams, MplsLdpProviderPortParams, MplsRsvpLeftSidePortParams, MplsRsvpRightSidePortParams, OsePortConfigGenParams, PbbGenCustomerPortConfig, PbbGenProviderPortConfig, Rocev2GenPortParams, Rocev2PerfGenRxPortParams, Rocev2PerfGenTxPortParams, Router, RsvpFrrEgressSidePortParams, RsvpFrrIngressSidePortParams, RtgTestGenIpv4PortParams, RtgTestGenIpv6PortParams, SpbLeftSidePortParams, SpbRightSidePortParams, SrTeConvergenceBackupEgressPortParams, SrTeConvergenceIgpPortParams, SrTeConvergenceIngressPortParams, SrTeConvergencePcePortParams, SrTeConvergencePrimaryEgressPortParams, Srv6TiLfaIngressPortParams, Srv6TiLfaPortParams, Srv6TiLfaRepairPortParams, Srv6TiLfaShortestPortParams, Srv6VpnGenIpv4AndIpv6CustPortParams, VdpConfigGenPortParams, VpnBgpVplsGenCustPortParams, VpnEvpnGenCorePortParams, VpnEvpnGenCustPortParams, VpnLdpVplsGenCustPortParams, VpnMartiniGenCustPortParams, VpnMplsTpCustPortGenParams, VpnNextGenMvpnGenCorePortParams, VpnNextGenMvpnGenCustPortParams, VxlanEvpnOverlayBgpRouteReflectorParams, VxlanEvpnOverlayBgpUnderlayParams, VxlanEvpnOverlayGenL2VniHostPortParams, VxlanEvpnOverlayGenL3VniHostPortParams, VxlanEvpnOverlayGenVtepPortParams, VxlanGenHostPortParams, VxlanGenVtepPortParams, VxlanOvsdbHostPortGenParams, VxlanOvsdbVtepPortGenParams
|
Affiliation port.
|
ContainerResultChild
(ContainerResult) |
RxPortPairResults, TxPortPairResults
|
General-purpose relation for result objects. For example, RxTrafficGroupResults
objects are linked to the StreamBlock object with this relation.
|
DstBoundTo
(DstBinding) |
TrafficDescriptor
|
Specifies destination endpoints bound to StreamBlock.
|
ExpectedRxSource
(ExpectedRx) |
StreamBlock
|
Expected Rx port.
|
GroupSource
(GroupMembership) |
PortGroup
|
Affiliation port group.
|
MemberOfVpn
(MemberOfVpn) |
EthernetVpnSiteInfo, VpnIdGroup, VpnSiteInfo6Pe, VpnSiteInfoMplsTpStatic, VpnSiteInfoRfc2547, VpnSiteInfoRfc4659, VpnSiteInfoVplsBgp, VpnSiteInfoVplsLdp
|
Do not use, to be removed
|
TrafficDescriptorMonitorPortSrc
(MonitorPortBinding) |
TrafficDescriptor
|
Monitor binding port.
|
MulticastExpectedRxPortsSource
(MulticastExpectedRxPorts) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Traffic sent to this end point is expected to be received as multicast traffic by
any of the ports connected through this relation.
|
Config
(MulticastMonitorPortBinding) |
Rfc3918Config, Rfc3918Config
|
Multicast monitor port binding.
|
OpenflowSwitchLinkedPortSource
(OpenflowSwitchLinkedPort) |
OpenflowSwitchPortConfig
|
Openflow switch edge linked port.
|
PhysicalPort
(PhysicalLogical) |
PhysicalPort
|
Physical port.
|
PrimaryIf
(PrimaryIf) |
Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies if a top-level interface is facing the DUT.
|
ResultChild
(ResultChild) |
ArpCache, ArpNdReport, ArpNdResults, BfdStateSummary, BgpStateSummary, FcResults, GreIfPortResults, Ieee1588v2StateSummary, Ieee8021asStateSummary, IptvPortResults, IsisStateSummary, LacpStateSummary, LdpStateSummary, LispRouterResults, LispStateSummary, LldpStateSummary, LspPingStateSummary, MplsTpStateSummary, MsdpPortResults, OseControllerAggregateResults, Ospfv2StateSummary, Ospfv3StateSummary, PcepPortResults, PfcResults, PimStateSummary, PingReport, RipngStateSummary, Ripv4StateSummary, RsvpStateSummary, RxPortPairResults, SipPortResults, SonetAlarmsResults, SonetResults, SrpStateSummary, StoragePortResults, StpStateSummary, SyncEthStateSummary, TwampClientResults, TwampPortTestSessionResults, TwampServerResults, TwampStateSummary, TxPortPairResults, XmppvJPortResults
|
Use this to connect a results object to an object.
|
DeviceGenParams
(SelectedPort) |
EmulatedDeviceGenParams, EthernetVpnSiteGenParams, HostGenParams, MultiSegmentLeftSitePortParams, MultiSegmentRightSitePortParams, MvpnGenCorePortParams, MvpnGenCustPortParams, OpenflowFlowGenParams, RouterGenParams, Srv6VpnGenCorePortParams, Srv6VpnGenIpv4AndIpv6CustPortParams, Srv6VpnGenIpv4CustPortParams, Srv6VpnGenIpv6CustPortParams, Vpn6PeGenCorePortParams, Vpn6PeGenCustPortParams, Vpn6PeSiteGenParams, VpnBgpVplsGenCorePortParams, VpnBgpVplsGenCustPortParams, VpnBgpVplsSiteGenParams, VpnEvpnGenCorePortParams, VpnEvpnGenCustPortParams, VpnLdpVplsGenCorePortParams, VpnLdpVplsGenCustPortParams, VpnLdpVplsSiteGenParams, VpnMartiniGenCorePortParams, VpnMartiniGenCustPortParams, VpnMplsTpCorePortGenParams, VpnMplsTpCustPortGenParams, VpnMplsTpStaticSiteGenParams, VpnNextGenMvpnGenCorePortParams, VpnNextGenMvpnGenCustPortParams, VpnRfc2547GenCorePortParams, VpnRfc2547GenCustPortParams, VpnRfc2547SiteGenParams, VpnRfc4659SiteGenParams, VxlanVmGenParams
|
Port.
|
SrcBoundTo
(SrcBinding) |
TrafficDescriptor
|
Specifies the source endpoint bound to StreamBlock.
|
TopLevelIf
(TopLevelIf) |
Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies the top-level interface in the interface stack.
|
UnicastExpectedRxPortsSource
(UnicastExpectedRxPorts) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Traffic sent to this end point is expected to be received as unicast traffic by any
of the ports connected through this relation.
|
| Attribute |
Description |
|
Common Writable Attributes
|
Active, Name
|
|
AppendLocationToPortName
|
Append location to port name.
Type: bool
Default: TRUE
Possible Values:
| Value |
Description |
| TRUE |
True.
|
| FALSE |
False.
|
|
|
Layer3Type
|
Layer 3 type.
Type: enum
Default: IPV4
Possible Values:
| Value |
Description |
| IPV4 |
IPv4.
|
| IPV6 |
IPv4.
|
| IPV4V6 |
IPv4-v6
|
|
|
Location
|
Location of the physical port to bind with.
Type: csp
Default: //(Offline)/1/1
|
|
UseDefaultHost
|
Use default host.
Type: bool
Default: TRUE
Possible Values:
| Value |
Description |
| TRUE |
True.
|
| FALSE |
False.
|
|
| Read-Only Attribute |
Description |
|
IsFlexEthernetClient
|
Is current port a Flex-Ethernet Client
Type: bool
Default: FALSE
Possible Values:
| Value |
Description |
| TRUE |
True, If port is of type.
|
| FALSE |
False, If port is not of type.
|
|
|
IsFlexEthernetPhy
|
Is current port a Flex-Ethernet Phy
Type: bool
Default: FALSE
Possible Values:
| Value |
Description |
| TRUE |
True, If port is of type
|
| FALSE |
False, If port is not of type
|
|
|
IsFlexEthernetPort
|
Is current port a Flex-Ethernet
Type: bool
Default: FALSE
Possible Values:
| Value |
Description |
| TRUE |
True, If port is of type
|
| FALSE |
False, If port is not of type
|
|
|
IsPgaPort
|
Is current port a PGA port
Type: bool
Default: TRUE
Possible Values:
| Value |
Description |
| TRUE |
True, If port is of type
|
| FALSE |
False, If port is not of type
|
|
|
LicensedPhys
|
Type: enum
Default: ETHERNET_COPPER
Possible Values:
| Value |
Description |
| ETHERNET_COPPER |
Copper Ethernet.
|
| ETHERNET_FIBER |
Fiber Ethernet.
|
| ETHERNET_10_GIG_FIBER |
Fiber 10 gigabit Ethernet.
|
| POS |
Packet over SONET.
|
| ETHERNET_10_GIG_COPPER |
Copper 10 gigabit Ethernet.
|
| ATM |
ATM.
|
| FC |
Fiber channel.
|
| ETHERNET_40_GIG_FIBER |
Fiber 40 gigabit Ethernet.
|
| ETHERNET_100_GIG_FIBER |
Fiber 100 gigabit Ethernet.
|
| IEEE_802_11 |
IEEE 802.11
|
| ETHERNET_25_GIG_FIBER |
Fiber 25 gigabit ethernet.
|
| ETHERNET_50_GIG_FIBER |
Fiber 50 gigabit ethernet.
|
| ETHERNET_400_GIG_FIBER |
Fiber 400 gigabit ethernet.
|
| ETHERNET_200_GIG_FIBER |
Fiber 200 gigabit ethernet.
|
| ETHERNET_POE_COPPER |
PoE Copper Ethernet.
|
| FLEXE_5X100_GIG_FIBER |
|
| ETHERNET_800_GIG_FIBER |
|
|
|
Online
|
Online status of the port.
Type: bool
Default: FALSE
Possible Values:
| Value |
Description |
| TRUE |
Port is online.
|
| FALSE |
Port is offline.
|
|
|
PhyMediaType
|
Phy media type
Type: enum
Default: UNKNOWN
Possible Values:
| Value |
Description |
| COPPER |
Copper
|
| FIBER |
Fiber
|
| IEEE802_11 |
Ieee802.11
|
| UNKNOWN |
Unknown
|
|
|
PortGroupSize
|
Port group size.
Type: u16
Default: 0
|
|
SupportedPhys
|
Supported physical layer interfaces under the port.
Type: enum
Default: ETHERNET_COPPER
Possible Values:
| Value |
Description |
| ETHERNET_COPPER |
Copper Ethernet.
|
| ETHERNET_FIBER |
Fiber Ethernet.
|
| ETHERNET_10_GIG_FIBER |
Fiber 10 gigabit Ethernet.
|
| POS |
Packet over SONET.
|
| ETHERNET_10_GIG_COPPER |
Copper 10 gigabit Ethernet.
|
| ATM |
ATM.
|
| FC |
Fiber channel.
|
| ETHERNET_40_GIG_FIBER |
Fiber 40 gigabit Ethernet.
|
| ETHERNET_100_GIG_FIBER |
Fiber 100 gigabit Ethernet.
|
| IEEE_802_11 |
IEEE 802.11
|
| ETHERNET_25_GIG_FIBER |
Fiber 25 gigabit ethernet.
|
| ETHERNET_50_GIG_FIBER |
Fiber 50 gigabit ethernet.
|
| ETHERNET_400_GIG_FIBER |
Fiber 400 gigabit ethernet.
|
| ETHERNET_200_GIG_FIBER |
Fiber 200 gigabit ethernet.
|
| ETHERNET_POE_COPPER |
PoE Copper Ethernet.
|
| FLEXE_5X100_GIG_FIBER |
|
| ETHERNET_800_GIG_FIBER |
|
|
|
TestModuleProfile
|
Test module profile.
Type: string
Default: "" (empty string)
|