Description:
Configuring General Port Parameters of Vtep under Vxlan Evpn Overlay
Parents: VxlanEvpnOverlayConfigGenParams
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| AffiliatedPort (AffiliationPort) |
Configuring Ports |
| Attribute | Description | ||||||
|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||
| EnableVlan |
Specifies the option of enabling VLAN Type: bool Default: FALSE Possible Values:
|
||||||
| GatewayIpAddress |
Configuring IP Address of Gateway Type: ip Default: 192.168.100.1 |
||||||
| GatewayIpAddressStep |
Configuring Gateway IP Address Increment Type: ip Default: 0.0.0.1 |
||||||
| GatewayIpv6Addr |
Specifies the VTEP Gateway IPv6 Address to be configured if VTEP encap is IPv6 Type: ipv6 Default: 2000::1 |
||||||
| GatewayIpv6AddrStep |
Specifies the VTEP Gateway IPv6 Address Step to be configured if VTEP encap is IPv6 Type: ipv6 Default: 0::1 |
||||||
| Ipv6PrefixLength |
Specifies the Prefix Length of IPv6 Prefixes to be configured if VTEP encap is IPv6. Type: u8 Default: 64 Range: 0 - 128 |
||||||
| Ipv6RouterId |
Specifies the VTEP Router ID IPv6 Address to be configured if VTEP encap is IPv6 Type: ipv6 Default: 2001::1 |
||||||
| Ipv6RouterIdStep |
Specifies the VTEP Router ID IPv6 Address step to be configured if VTEP encap is IPv6 Type: ipv6 Default: 0::1 |
||||||
| MacAddress |
Configuring MAC Address Type: mac Default: 10:00:00:10:00:01 |
||||||
| MacAddressStep |
Configuring MAC Address Increment Type: mac Default: 00:00:00:00:00:01 |
||||||
| PrefixLength |
Configuring Prefix Length Type: u8 Default: 24 Range: 0 - 32 |
||||||
| RouterId |
Configuring Router ID Type: ip Default: 10.1.1.1 |
||||||
| RouterIdStep |
Configuring Router ID Increment Type: ip Default: 0.0.0.1 |
||||||
| VlanCount |
Configuring VLAN Count Type: u16 Default: 1 Range: 1 - 65535 |
||||||
| VlanId |
Configuring VLAN ID Type: u16 Default: 1 Range: 0 - 4095 |
||||||
| VlanIdStep |
Configuring VLAN ID Increment Type: u16 Default: 1 Range: 0 - 4095 |
||||||
| VtepDevName |
VTEP emulated device name Type: string Default: VTEP |
||||||
| VtepIpAddress |
Configuring IP Address of Vtep Type: ip Default: 192.168.100.2 |
||||||
| VtepIpAddressStep |
Configuring IP Address Increment of Vtep Type: ip Default: 0.0.0.1 |
||||||
| VtepIpv6Addr |
Specifies the VTEP IPv6 Address to be configured if VTEP encap is IPv6 Type: ipv6 Default: 2000::2 |
||||||
| VtepIpv6AddrStep |
Specifies the VTEP IPv6 Address step to be configured if VTEP encap is IPv6 Type: ipv6 Default: 0::1 |
||||||
| VtepIpv6LinkLocalAddr |
Specifies the VTEP IPv6 Link Local Address to be configured if VTEP encap is IPv6 Type: ipv6 Default: FE80::1 |
||||||
| VtepIpv6LinkLocalAddrStep |
Specifies the VTEP IPv6 Link Local Address step to be configured if VTEP encap is IPv6 Type: ipv6 Default: :: |
||||||
| VtepTunnelIpAddress |
Configuring the Tunnel IP Mode of Vtep Type: enum Default: InterfaceIp Possible Values:
|
There are no read-only attributes.