Required field for (S,G) groups.
The Join source block (Source Start IP address and Source Prefix length) represents
the source address range from which the (S,G) group requests traffic. Each Join/Prune message
corresponding to this (S,G) group includes the specified source address in its Join source
list (or in the Prune source list, if the group is being deleted or made
inactive).
Side name
(Type) |
Relative |
Description |
DstBoundTo (DstBinding) |
PathDescriptor, StreamBlock
|
Specifies destination endpoints bound to StreamBlock.
|
EncapsulationSource (Encapsulation) |
PathDescriptor
|
Specifies the encapsulation.
|
MemberOfVpn (MemberOfVpn) |
EthernetVpnSiteInfo, VpnIdGroup, VpnSiteInfo6Pe, VpnSiteInfoMplsTpStatic, VpnSiteInfoRfc2547, VpnSiteInfoRfc4659, VpnSiteInfoVplsBgp, VpnSiteInfoVplsLdp
|
Do not use, to be removed
|
MulticastExpectedRxPorts (MulticastExpectedRxPorts) |
Port
|
Traffic sent to this end point is expected to be received as multicast traffic by
any of the ports connected through this relation.
|
OptionallyStackedUnder (OptionallyStackedOnEndpoint) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies an optionally-selected lower interface in the stack. Selection is
controlled by protocol implementations which decide based on other criteria whether they
should include the target interface in their stack.
|
SrcBoundTo (SrcBinding) |
PathDescriptor, StreamBlock
|
Specifies the source endpoint bound to StreamBlock.
|
StackedOn (StackedOnEndpoint) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies network endpoint stacking.
|
UnicastExpectedRxPorts (UnicastExpectedRxPorts) |
Port
|
Traffic sent to this end point is expected to be received as unicast traffic by any
of the ports connected through this relation.
|
VpnTag (VpnTag) |
VpnTag
|
|
Attribute |
Description |
Common Writable Attributes
|
Active, Name
|
AddrIncrement
|
Not used with this object.
Type: u32
Default: 1
|
AddrIncrementPerRouter
|
NOTE: This attribute is deprecated. It will be removed in subsequent releases,
so it is recommended that you do not use it.
Not used with this object.
Type: u32
Default: 0
|
AddrModifierTypePerDevice
|
Address Modifier Type per Device in Device Block.
Type: enum
Default: CONTINUOUS
Possible Values:
Value |
Description |
CONTINUOUS |
Continuous.
|
REPEAT |
Repeat.
|
|
NetworkCount
|
Not used with this object.
Type: u32
Default: 1
|
NetworkInterfaceWithIpList
|
Create Network Interface for Network Block IP List.
Type: bool
Default: FALSE
Possible Values:
Value |
Description |
TRUE |
Yes.
|
FALSE |
No.
|
|
PrefixLength
|
Prefix length of the joined Source IP address.
Type: u8
Default: 24
Range: 0 - 32
|
StartIpList
|
Starting IP address of Join source range. Note: Only the first IP address in the
list is used.
Type: ip
Default: 192.0.1.0
|
UseUniqueIpForOverlappingPrefixes
|
Use Unique IP for Overlapping Prefixes
Type: bool
Default: FALSE
Possible Values:
Value |
Description |
TRUE |
Enable Use Unique IP for Overlapping Prefixes option
|
FALSE |
Disable Use Unique IP for Overlapping Prefixes option
|
|
There are no read-only attributes.