PppIf Object


Description:

PPP interface object.

Parents: EmulatedDevice, ExternalDevice, ExternalDevicePort, Host, Port, Router, SUT

Children: GroupIf, MplsGeneralizedPwBindInfo, MplsIpv4MultiLayerStaticBindInfo, MplsIpv4PrefixBindInfo, MplsIpv4VpnBindInfo, MplsIpv6MultiLayerStaticBindInfo, MplsIpv6PrefixBindInfo, MplsIpv6VpnBindInfo, MplsRsvpTunnelBindInfo, MplsRsvpTunnelSrcDstBindInfo, MplsSrBindInfo, MplsTpStaticLspBindInfo, MplsTpStaticPseudoWireBindInfo, MplsVcBindInfo, MplsVplsBindInfo, Rfc4814EthIIIfDecorator

Relations:

Side name
(Type)
Relative Description
GroupIf
(AffiliatedGroupIf)

GroupIf

Affiliated group interface.

ApplicableOnPhy
(ApplicableOnPhy)

POSPhy

Specifies physical layer compatibility

DstBoundTo
(DstBinding)

PathDescriptor, StreamBlock, TrafficDescriptor

Specifies destination endpoints bound to StreamBlock.

EncapsulationSource
(Encapsulation)

PathDescriptor

Specifies the encapsulation.

NetworkLink
(LinkSrc)

CustomLink, CustomLink, DualStackLiteLink, DualStackLiteLink, EoamLink, EoamLink, EthernetBridgeLink, EthernetBridgeLink, EvpnCeToPeLink, EvpnCeToPeLink, IpForwardingLink, IpForwardingLink, Ipv6RapidDeploymentLink, Ipv6RapidDeploymentLink, ItagServiceLink, ItagServiceLink, L2GreTunnelLink, L2GreTunnelLink, L2tpv3ForwardingLink, L2tpv3ForwardingLink, MplsForwardingLink, MplsForwardingLink, MplsHierarchicalLink, MplsHierarchicalLink, MplsIpv4VpnCeToPeLink, MplsIpv4VpnCeToPeLink, MplsIpv6VpnCeToPeLink, MplsIpv6VpnCeToPeLink, MplsL2VpnPeToPLink, MplsL2VpnPeToPLink, MplsL3VpnPeToPLink, MplsL3VpnPeToPLink, MVpnGreCeToPeLink, MVpnGreCeToPeLink, MVpnGrePeToPLink, MVpnGrePeToPLink, OtvEdgeDeviceLink, OtvEdgeDeviceLink, StationToScompLink, StationToScompLink, VifToVicLink, VifToVicLink, VlanSwitchLink, VlanSwitchLink, VplsBgpCeToPeLink, VplsBgpCeToPeLink, VplsLdpCeToPeLink, VplsLdpCeToPeLink, VsiToStationLink, VsiToStationLink, VxlanGpeLink, VxlanGpeLink, VxlanVmToVtepLink, VxlanVmToVtepLink

Link source.

MemberOfVpn
(MemberOfVpn)

EthernetVpnSiteInfo, VpnIdGroup, VpnSiteInfo6Pe, VpnSiteInfoMplsTpStatic, VpnSiteInfoRfc2547, VpnSiteInfoRfc4659, VpnSiteInfoVplsBgp, VpnSiteInfoVplsLdp

Do not use, to be removed

MulticastExpectedRxPorts
(MulticastExpectedRxPorts)

Port

Traffic sent to this end point is expected to be received as multicast traffic by any of the ports connected through this relation.

OptionallyStackedUnder
(OptionallyStackedOnEndpoint)

Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf

Specifies an optionally-selected lower interface in the stack. Selection is controlled by protocol implementations which decide based on other criteria whether they should include the target interface in their stack.

OtvEdgeDeviceConfig
(OtvTopLevelIf)

OtvEdgeDeviceConfig

Otv top level private interface.

PrimaryIfSource
(PrimaryIf)

EmulatedDevice, ExternalDevice, ExternalDevicePort, Host, Port, Router, SUT

Specifies if a top-level interface is facing the DUT.

RelayBlockConfig
(RelayIf)

Dhcpv4BlockConfig, Dhcpv4BlockConfig

Config to relay agent interface.


(ResolvesInterface)

BgpRouterConfig, IsisRouterConfig, LdpRouterConfig, LispRouterConfig, Ospfv2RouterConfig, Ospfv3RouterConfig, RsvpIngressTunnelParams, RsvpRouterConfig

Use this to link the traffic binding interfaces and traffic binding resolver.

SrcBoundTo
(SrcBinding)

PathDescriptor, StreamBlock, TrafficDescriptor

Specifies the source endpoint bound to StreamBlock.

StackedOn
(StackedOnEndpoint)

Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf

Specifies network endpoint stacking.

TopLevelIfSource
(TopLevelIf)

EmulatedDevice, ExternalDevice, ExternalDevicePort, Host, Port, Router, SUT

Specifies the top-level interface in the interface stack.

L2tpv2UdpConfig
(UdpSrcCustomIf)

L2tpv2BlockConfig

Config to Udp source custom interface.

UnicastExpectedRxPorts
(UnicastExpectedRxPorts)

Port

Traffic sent to this end point is expected to be received as unicast traffic by any of the ports connected through this relation.

UsesIfSource
(UsesIf)

AncpAccessNodeConfig, AppPerfClientConfig, AppPerfServerConfig, AutosarTimeSyncConfig, BfdRouterConfig, BridgePortConfig, CifsClientProtocolConfig, CifsServerProtocolConfig, CoapServerConfig, CuspProtocolConfig, Dhcpv4BlockConfig, Dhcpv4ServerConfig, Dhcpv6BlockConfig, Dhcpv6PdBlockConfig, Dhcpv6ServerConfig, Dot1xSupplicantBlockConfig, DpgClientProtocolConfig, DpgServerProtocolConfig, DualStackLiteConfig, EcpriProtocolConfig, EoamNodeConfig, FcEPortConfig, FcFPortConfig, FcHostConfig, FcoeHostConfig, FcoeVePortConfig, FcoeVfPortConfig, FtpClientProtocolConfig, FtpServerProtocolConfig, HttpClientProtocolConfig, HttpServerProtocolConfig, Ieee1588v2ClockConfig, Ieee80211AccessPointConfig, Ieee80211ClientConfig, Ieee8021asClockConfig, IgmpHostConfig, IgmpRouterConfig, IperfClientProtocolConfig, IperfServerProtocolConfig, Ipv6RapidDeploymentConfig, L2tpv2BlockConfig, L2tpv3BlockConfig, LacpPortConfig, LagBfdPortConfig, LinkOamRouterConfig, LispRouterConfig, LldpNodeConfig, LspPingProtocolConfig, MacsecSupplicantBlockConfig, MldHostConfig, MldRouterConfig, MplsTpConfig, MplsTpOamNodeConfig, MsdpProtocolConfig, NetconfClientConfig, NetconfProtocolConfig, NtpClientConfig, OamFlexeClientConfig, OpenflowControllerProtocolConfig, OpflexDeviceConfig, OseSwitchConfig, Ospfv2RouterConfig, Ospfv3RouterConfig, OtvEdgeDeviceConfig, OtvSiteDeviceConfig, OvsdbServerConfig, PacketChannel, PcepProtocolConfig, PimRouterConfig, PppoaClientBlockConfig, PppoaServerBlockConfig, PppoeClientBlockConfig, PppoeServerBlockConfig, PppoL2tpv2ClientBlockConfig, PppoL2tpv2ServerBlockConfig, PppoL2tpv3ClientBlockConfig, PppoL2tpv3ServerBlockConfig, PppProtocolConfig, RawTcpClientProtocolConfig, RawTcpServerProtocolConfig, RipRouterConfig, RoEBlockConfig, SaaDeviceConfig, SipUaProtocolConfig, SrpConfig, Srv6OamProtocolConfig, StorageWorkerConfig, SyncEthDeviceConfig, TrillRbridgeConfig, TwampClientConfig, TwampServerConfig, VdpStationConfig, VicAdapterConfig, VideoClientProtocolConfig, VideoServerProtocolConfig, VifConfig, VsiBlockConfig, VxlanVtepConfig, XmppvJClientConfig

Specifies the interfaces used by the configuration object (configuration object examples: BgpRouterConfig, LdpRouterConfig, and so on).

PppIf Writable Attributes

Attribute Description
Common Writable Attributes Active, Name
IfCountPerLowerIf

Number of interfaces in this interface object.

Type: u32

Default: 1

IfRecycleCount

Not used on this object.

Type: u32

Default: 0

IsLoopbackIf

Whether this is a loopback interface.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

This is a loopback interface.

FALSE

This is not a loopback interface.

IsRange

Not used on this object.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Not used.

FALSE

Not used.

ProtocolId

Protocol ID.

Type: enum

Default: PPP_PROTOCOL_ID_IPV4

Possible Values:

Value Description
PPP_PROTOCOL_ID_IPV6

IPv6 protocol ID.

PPP_PROTOCOL_ID_IPV4

IPv4 protocol ID.

PPP_PROTOCOL_ID_MPLS

MPLS protocol ID.

PppIf Read-Only Attributes

Read-Only Attribute Description
EffectiveBlockCount

Block count for this interface.

Type: u32

Default: 1

IfState

State of this interface.

Type: enum

Default: DISABLED

Possible Values:

Value Description
READY

Ready.

DISABLED

Disabled.

DELETING

Deleting.

PARTIALLY_READY

Partially ready.