Description:
Information for VPN site using BGP virtual private LAN services (VPLS).
Parents: Project, VpnIdGroup
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| Member (MemberOfVpnIdGroup) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EmulatedDevice, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, Port, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VpnIdGroup, VxlanGpeIf, VxlanIf |
VPN site belongs to a particular VPN. |
| Attribute | Description | ||||||
|---|---|---|---|---|---|---|---|
| Count |
Number of VPLS instance. Type: u32 Default: 1 |
||||||
| EnableInterAsOption |
Whether the VPN is an inter-AS VPN. Type: bool Default: FALSE Possible Values:
|
||||||
| IntermediateStartVeId |
Start VE ID for intermediate router. Type: u32 Default: 1 |
||||||
| IntermediateVeIdStep |
VE ID step for intermediate router. Type: u32 Default: 1 |
||||||
| LocalAsbrIpv4Addr |
Local AS border router IPv4 address. Type: ip Default: 192.85.1.1 |
||||||
| LocalAsbrIpv4PrefixLength |
Local AS border router IPv4 prefix length. Type: u8 Default: 32 Range: 0 - 32 |
||||||
| PeIpv4Addr |
Router IPv4 address for emulated provider edge (PE) device. Type: ip Default: 192.85.1.1 |
||||||
| PeIpv4PrefixLength |
Router IPv4 prefix length for emulated provider edge (PE) device. Type: u8 Default: 32 Range: 0 - 32 |
||||||
| PseudowireType |
Pseudowire type. Type: enum Default: SINGLE_SEGMENT Possible Values:
|
||||||
| RouteDistinguisher |
An 8-byte value that is concatenated with an IPv4 prefix to create a unique VPN IPv4 prefix. Supported formats are AS-number:value or IPv4-Prefix:value. Type: string Default: 100:1 |
||||||
| RouteDistinguisherStep |
Route distinguisher step size. Type: string Default: 0:1 |
||||||
| RouteTarget |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Route target extended community attribute. The route target identifies a set of sites to which a provider edge (PE) router distributes routes. This attribute is entered as a comma-separated list of up to eight entries, formatted as AS-number:value or IPv4-prefix:value. Type: string Default: 100:1 |
||||||
| StartVeId |
Starting VE (VPLS edge device) identifier. The VE ID represents an emulated endpoint (either a PE or a u-PE) that is being advertised by the BGP speaker. Type: u32 Default: 1 |
||||||
| VeIdCount |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Number of VE identifiers. Type: u32 Default: 1 |
||||||
| VeIdStep |
Step applied to each subsequent VE identifier. Type: u32 Default: 1 |
There are no read-only attributes.