PPPoX server IPv4 address pool.
Side name
(Type) |
Relative |
Description |
DstBoundTo (DstBinding) |
PathDescriptor, StreamBlock
|
Specifies destination endpoints bound to StreamBlock.
|
EncapsulationSource (Encapsulation) |
PathDescriptor
|
Specifies the encapsulation.
|
MemberOfVpn (MemberOfVpn) |
EthernetVpnSiteInfo, VpnIdGroup, VpnSiteInfo6Pe, VpnSiteInfoMplsTpStatic, VpnSiteInfoRfc2547, VpnSiteInfoRfc4659, VpnSiteInfoVplsBgp, VpnSiteInfoVplsLdp
|
Do not use, to be removed
|
MulticastExpectedRxPorts (MulticastExpectedRxPorts) |
Port
|
Traffic sent to this end point is expected to be received as multicast traffic by
any of the ports connected through this relation.
|
OptionallyStackedUnder (OptionallyStackedOnEndpoint) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies an optionally-selected lower interface in the stack. Selection is
controlled by protocol implementations which decide based on other criteria whether they
should include the target interface in their stack.
|
SrcBoundTo (SrcBinding) |
PathDescriptor, StreamBlock
|
Specifies the source endpoint bound to StreamBlock.
|
StackedOn (StackedOnEndpoint) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies network endpoint stacking.
|
UnicastExpectedRxPorts (UnicastExpectedRxPorts) |
Port
|
Traffic sent to this end point is expected to be received as unicast traffic by any
of the ports connected through this relation.
|
VpnTag (VpnTag) |
VpnTag
|
|
Attribute |
Description |
Common Writable Attributes
|
Active, Name
|
AddrIncrement
|
IP address increment value.
Type: u32
Default: 1
|
AddrIncrementPerRouter
|
NOTE: This attribute is deprecated. It will be removed in subsequent releases,
so it is recommended that you do not use it.
IP address increment per router.
Type: u32
Default: 0
|
AddrModifierTypePerDevice
|
Address modifier type per device in device block.
Type: enum
Default: CONTINUOUS
Possible Values:
Value |
Description |
CONTINUOUS |
Continuous.
|
REPEAT |
Repeat.
|
|
Ipv4PeerPoolAddr
|
IPv4 peer pool start address.
Type: ip
Default: 0.0.0.0
|
NetworkCount
|
Number of IP addresses in the server pool.
Type: u32
Default: 1
|
NetworkInterfaceWithIpList
|
Flag indicating how to create Network Interface.
Type: bool
Default: FALSE
Possible Values:
Value |
Description |
TRUE |
Create one single Network Interface with multi IP
addresses.
|
FALSE |
Create multi Network Interface with multi IP
addresses.
|
|
PrefixLength
|
Currently not used.
Type: u8
Default: 24
Range: 0 - 32
|
StartIpList
|
Starting IP address in the address pool. If a IP list is specified the
first IP address is used as the starting address and the remaining IP addresses are
ignored.
Type: ip
Default: 192.0.1.0
|
UseUniqueIpForOverlappingPrefixes
|
Use Unique IP for Overlapping Prefixes
Type: bool
Default: FALSE
Possible Values:
Value |
Description |
TRUE |
Enable Use Unique IP for Overlapping Prefixes option
|
FALSE |
Disable Use Unique IP for Overlapping Prefixes option
|
|
There are no read-only attributes.