Description:
Host device object.
Parents: Project
Children: Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
Automatically created from: ExternalDevicePort, Port
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| AffiliatedRouter (AffiliatedRouter) |
Affiliated router. |
|
| AffiliationLogicIlCore (AffiliationLogicIlCore) |
Affiliation Logical Il core. |
|
| AffiliatedPort (AffiliationPort) |
Affiliated port. |
|
| MovedEmulatedDevice (MovedEmulatedDevice) |
|
|
| PrimaryIf (PrimaryIf) |
Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf |
Specifies if a top-level interface is facing the DUT. |
| TopLevelIf (TopLevelIf) |
Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf |
Specifies the top-level interface in the interface stack. |
| Attribute | Description | ||||||
|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||
| DeviceCount |
Number of devices in the device block. Type: u32 Default: 1 Range: 1 - 0x7FFFFFFF |
||||||
| EnablePingResponse |
Enable host to response ping. Type: bool Default: FALSE Possible Values:
|
||||||
| Ipv6RouterId |
IPv6 Router ID. Type: ipv6 Default: 2000::1 |
||||||
| Ipv6RouterIdStep |
IPv6 Router ID Step. Type: ipv6 Default: 0000::1 |
||||||
| RouterId |
Router ID. Type: ip Default: 192.0.0.1 |
||||||
| RouterIdStep |
Router ID Step. Type: ip Default: 0.0.0.1 |
There are no read-only attributes.